FreeBSD Manual Pages
multilog(8) System Manager's Manual multilog(8) NAME multilog - reads a sequence of lines from stdin and appends selected lines to any number of logs. SYNOPSIS multilog script DESCRIPTION script consists of any number of arguments. Each argument specifies one ac- tion. The actions are carried out in order for each line of input. Note that actions may contain shell metacharacters that need to be quoted when multilog is run from a shell. multilog exits 0 when it sees the end of stdin. If stdin has a partial fi- nal line then multilog inserts a final newline. multilog writes a message to stderr and exits 111, without reading any in- put, if it runs out of memory or if another multilog process is writing to one of the same automatically rotated logs. If multilog has trouble writing to disk after it starts reading input, it writes a message to stderr, pauses, and tries again, without losing any data. Note that this may block any program feeding input to multilog. If multilog receives a TERM signal, it will read and process data until the next newline, and then exit, leaving stdin at the first byte of data it has not processed. SELECTING LINES Each line is initially selected. The following actions change this: -pattern deselects the line if pattern matches the line. +pattern selects the line if pattern matches the line. F changes the pattern match mode to use fnmatch for all subsequent patterns. S changes the pattern match mode back to use simple patterns (the de- fault). SIMPLE PATTERNS pattern is a string of stars and non-stars. It matches any concatenation of strings matched by all the stars and non-stars in the same order. A non- star matches itself. A star before the end of pattern matches any string that does not include the next character in pattern. A star at the end of pattern matches any string. For example, the action +hello selects hello. It does not select hello world. The action -named[*]: Cleaned cache * deselects named[135]: Cleaned cache of 3121 RRs. The first star matches any string that does not include a right bracket. The action -* deselects every line. To save memory, multilog actually checks pattern against only the first 1000 characters of each line. FNMATCH PATTERNS When fnmatch mode is selected, multilog uses the system's fnmatch function to match pattern. This mode is less efficient than the simple patterns, but more flexable in the types of patterns it allows. In particular, ? (not between brackets) matches any single character, * (not between brackets) matches any string, including the empty string, [...] matches a single character, and \?, \*, and \[ match ?, *, [ exactly, respectively. The expression [...] matches any single character enclosed by the brack- ets. If the first character within the brackets is !, the expression matches any character except those enclosed by the brackets. Two charac- ters within the brackets separated by - denote a range. [A-F] is equiva- lent to [ABCDEF]. The characters ?, *, and [ lose their special meaning within the brackets. See the fnmatch(3) or glob(7) man pages for more details. ALERTS The action e prints (the first 200 bytes of) each selected line to stderr. STATUS FILES The action =file replaces the contents of file with (the first 1000 bytes of) each selected line, padded with newlines to 1001 bytes. There is no pro- tection of file against power outages. For example, the sequence of actions -* +STAT* =log/status maintains log/status as a copy of the most recent line starting with STAT. TIMESTAMPING The action t inserts an @, a precise timestamp, and a space in front of each line, using the same format as tai64n(8). T inserts an accustamp-style timestamp and a space in front of each line, formatted as S.M where S is the number of seconds since the UNIX epoch (midnight January 1 1970-01-01 UTC) and M is the number of microseconds. These are required to be the first action. Patterns apply to the line after the timestamp is inserted. For example, if multilog t '-*' '+* fatal: *' ./main reads the line fatal: out of memory then it will log a line such as @400000003b4a39c23294b13c fatal: out of memory with the first * matching the timestamp. You can use tai64nlocal(8) to convert these timestamps to human-readable form. AUTOMATICALLY ROTATED LOGS If dir starts with a dot or slash then the action dir appends each selected line to a log named dir. If dir does not ex- ist, multilog creates it. Do not attempt to write to one log from two simultaneous multilog processes, or two actions in one process. The log format is as follows. dir is a directory containing some number of old log files, a log file named current, and other files for multilog to keep track of its actions. Each old log file has a name beginning with @, continuing with a precise timestamp showing when the file was finished, and ending with one of the following codes: .s This file is completely processed and safely written to disk. This code may be changed as described below. .u This file was being created at the moment of an outage. It may have been truncated and has not been processed. Beware that NFS, async filesystems, and softupdates filesystems may discard files that were not safely written to disk before an outage. While multilog is running, current has mode 644. If multilog sees the end of stdin, it writes current safely to disk, and sets the mode of current to 744. When it restarts, it sets the mode of current back to 644 and contin- ues writing new lines. When multilog decides that current is big enough, it writes current safely to disk, sets the mode of current to 744, and renames current as an old log file. ssize sets the maximum file size for subsequent dir actions. multilog will decide that current is big enough if current has size bytes. (multilog will also decide that current is big enough if it sees a newline within 2000 bytes of the maximum file size; it tries to fin- ish log files at line boundaries.) size must be between 4096 and 2147483647. The default maximum file size is 99999. In versions 0.75 and above: If multilog receives an ALRM signal, it immediately decides that current is big enough, if current is non- empty. nnum sets the number of log files for subsequent dir actions. After re- naming current, if multilog sees num or more old log files, it re- moves the old log file with the smallest timestamp. num must be at least 2. The default number of log files is 10. !processor sets a processor for subsequent dir actions. multilog will feed current through processor and save the output as an old log file in- stead of current. multilog will also save any output that processor writes to descriptor 5, and make that output readable on descriptor 4 when it runs processor on the next log file. For reliability, processor must exit nonzero if it has any trouble creating its out- put; multilog will then run it again. Note that running processor may block any program feeding input to multilog. wcode Changes the "safely written" code from .s as described above to .code for subsequent dir actions. This is useful when using a processor that compresses or otherwise translates the completed log file into a different file format. SEE ALSO fnmatch(3), glob(7), envdir(8), envini(8), envuidgid(8), fghack(8), pgr- phack(8), readproctitle(8), setlock(8), setuidgid(8), setuser(8), soft- limit(8), supervise(8), svc(8), svok(8), svscan(8), svscanboot(8), svs- tat(8), tai64n(8), tai64nlocal(8) multilog(8)
NAME | SYNOPSIS | DESCRIPTION | SELECTING LINES | ALERTS | STATUS FILES | TIMESTAMPING | AUTOMATICALLY ROTATED LOGS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=multilog&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>