nbdkit-plugin(3) NBDKIT nbdkit-plugin(3) NAME nbdkit-plugin - how to write nbdkit plugins SYNOPSIS #define NBDKIT_API_VERSION 2 #include <nbdkit-plugin.h> #define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS static void * myplugin_open (void) { /* create a handle ... */ return handle; } static struct nbdkit_plugin plugin = { .name = "myplugin", .open = myplugin_open, .get_size = myplugin_get_size, .pread = myplugin_pread, .pwrite = myplugin_pwrite, /* etc */ }; NBDKIT_REGISTER_PLUGIN(plugin) Compile the plugin as a shared library: gcc -fPIC -shared myplugin.c -o myplugin.so and load it into nbdkit: nbdkit [--args ...] ./myplugin.so [key=value ...] When debugging, use the -fv options: nbdkit -fv ./myplugin.so [key=value ...] DESCRIPTION An nbdkit plugin is a new source device which can be served using the Net- work Block Device (NBD) protocol. This manual page describes how to create an nbdkit plugin in C. To see example plugins: https://gitlab.com/nbdkit/nbdkit/tree/master/plug- ins To write plugins in other languages, see: nbdkit-cc-plugin(3), nbd- kit-golang-plugin(3), nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbd- kit-perl-plugin(3), nbdkit-python-plugin(3), nbdkit-rust-plugin(3), nbd- kit-sh-plugin(3), nbdkit-tcl-plugin(3) . API and ABI guarantee for C plugins Plugins written in C have an ABI guarantee: a plugin compiled against an older version of nbdkit will still work correctly when loaded with a newer nbdkit. We also try (but cannot guarantee) to support plugins compiled against a newer version of nbdkit when loaded with an older nbdkit, al- though the plugin may have reduced functionality if it depends on features only provided by newer nbdkit. For plugins written in C, we also provide an API guarantee: a plugin writ- ten against an older header will still compile unmodified with a newer nbd- kit. The API guarantee does not always apply to plugins written in other (non-C) languages which may have to adapt to changes when recompiled against a newer nbdkit. WRITING AN NBDKIT PLUGIN "#define NBDKIT_API_VERSION 2" Plugins must choose which API version they want to use, by defining NBD- KIT_API_VERSION before including "<nbdkit-plugin.h>" (or any other nbdkit header). If omitted, the default version is 1 for backwards-compatibility with nbd- kit v1.1.26 and earlier; however, it is recommended that new plugins be written to the maximum version (currently 2) as it enables more features and better interaction with nbdkit filters. The rest of this document only covers the version 2 interface. A newer nbdkit will always support plugins written in C which use any prior API version. "#include <nbdkit-plugin.h>" All plugins should start by including this header file (after optionally choosing an API version). "#define THREAD_MODEL ..." All plugins must define a thread model. See "Threads" below for details. It is generally safe to use: #define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS "struct nbdkit_plugin" All plugins must define and register one "struct nbdkit_plugin", which con- tains the name of the plugin and pointers to callback functions, and use the NBDKIT_REGISTER_PLUGIN(plugin) macro: static struct nbdkit_plugin plugin = { .name = "myplugin", .longname = "My Plugin", .description = "This is my great plugin for nbdkit", .open = myplugin_open, .get_size = myplugin_get_size, .pread = myplugin_pread, .pwrite = myplugin_pwrite, /* etc */ }; NBDKIT_REGISTER_PLUGIN(plugin) The ".name" field is the name of the plugin. The callbacks are described below (see "CALLBACKS"). Only ".name", ".open", ".get_size" and ".pread" are required. All other callbacks can be omitted, although typical plugins need to use more. Callback lifecycle Callbacks are called in the following order over the lifecycle of the plu- gin: aaaaaaaaaaaaaaaaaaaa a load a aaaaaaaaaaa~aaaaaaaaa a configuration phase starts aa aaaaaaaaaaa'aaaaaaaaa a a config a config is called once per a aaaaaaaaaaa~aaaaaaaaaao key=value on the command line a aaaaaaaaaaa'aaaaaaaaa a a config_complete a a aaaaaaaaaaa~aaaaaaaaa a aaaaaaaaaaa'aaaaaaaaa a a thread_model a a aaaaaaaaaaa~aaaaaaaaa configuration phase ends aa aaaaaaaaaaa'aaaaaaaaa a get_ready a aaaaaaaaaaa~aaaaaaaaa a nbdkit forks into the background aaaaaaaaaaa'aaaaaaaaa a after_fork a aaaaaaaaaaa~aaaaaaaaa a nbdkit starts serving clients a aaaaaaaaaaaa'aaaaaaaaaaaaaa~a a a a a a a a a aaaaaaaa'aaaaaa client #1 a a preconnect a a aaaaaaaa~aaaaaa a aaaaaaaa'aaaaaa a alist_exportsa a aaaaaaaa~aaaaaa a aaaaaaaa'aaaaaa a a open a a aaaaaaaa~aaaaaa a aaaaaaaa'aaaaaa NBD option a a can_write a negotiation a aaaaaaaa~aaaaaa a aaaaaaaa'aaaaaa aaaaaaaa'aaaaaa client #2 a get_size a a preconnect a aaaaaaaa~aaaaaa aaaaaaaa~aaaaaa aaaaaaaa'aaaaaa data a pread a serving aaaaaaaa~aaaaaaao ... aaaaaaaa'aaaaaa a pwrite a aaaaaaaa~aaaaaaao aaaaaaaa'aaaaaa aaaaaaaa'aaaaaa a close a a close a aaaaaaaaaaaaaa aaaaaaaaaaaaaa a before nbdkit exits a aaaaaaaaaaa'aaaaaaaaa a cleanup a aaaaaaaaaaa~aaaaaaaaa aaaaaaaaaaa'aaaaaaaaa a unload a aaaaaaaaaaaaaaaaaaaa Notes "nbdkit --dump-plugin" The order of calls when the user queries the plugin is slightly differ- ent: ".config" is called once for each parameter. ".config_complete" is not called. ".thread_model" is called after ".config". ".get_ready" This is the last chance to do any global preparation that is needed to serve connections. In particular, error messages here will be visible to the user, but they might not be in ".after_fork" (see below). Plugins should not create background threads here. Use ".after_fork" instead. ".after_fork" ".after_fork" is called after the server has forked into the background and changed UID and directory. If a plugin needs to create background threads (or uses an external library that creates threads) it should do so here, because background threads are invalidated by fork. Because the server may have forked into the background, error messages and failures from ".after_fork" cannot be seen by the user unless they look through syslog. An error in ".after_fork" can appear to the user as if nbdkit ajust dieda. So in almost all cases it is better to use ".get_ready" instead of this callback, or to do as much preparation work as possible in ".get_ready" and only start background threads here. The server doesn't always fork (eg. if the -f flag is used), but even so this callback will be called. If you want to find out if the server forked between ".get_ready" and ".after_fork" use getpid(2). ".preconnect" and ".open" ".preconnect" is called when a TCP connection has been made to the server. This happens early, before NBD or TLS negotiation. ".open" is called when a new client has connected and finished the NBD handshake. TLS negotiation (if used) has been completed successfully. ".can_write", ".get_size" and other option negotiation callbacks These are called during option negotiation with the client, but before any data is served. These callbacks may return different values across different ".open" calls, but within a single connection, they are called at most once and cached by nbdkit for that connection. ".pread", ".pwrite" and other data serving callbacks After option negotiation has finished, these may be called to serve data. Depending on the thread model chosen, they might be called in parallel from multiple threads. The data serving callbacks include a flags argument; the results of the negotiation callbacks influence whether particular flags will ever be passed to a data callback. ".cleanup" and ".unload" The difference between these two methods is that ".cleanup" is called before any filter has been removed from memory with dlclose(3). When ".unload" is called, nbdkit is in the middle of calling dlclose(3). Most plugins do not need to worry about this difference. Flags The following flags are defined by nbdkit, and used in various data serving callbacks as follows: "NBDKIT_FLAG_MAY_TRIM" This flag is used by the ".zero" callback; there is no way to disable this flag, although a plugin that does not support trims as a way to write zeroes may ignore the flag without violating expected semantics. "NBDKIT_FLAG_FUA" This flag represents Forced Unit Access semantics. It is used by the ".pwrite", ".zero", and ".trim" callbacks to indicate that the plugin must not return a result until the action has landed in persistent storage. This flag will not be sent to the plugin unless ".can_fua" is provided and returns "NBDKIT_FUA_NATIVE". The following defines are valid as successful return values for ".can_fua": "NBDKIT_FUA_NONE" Forced Unit Access is not supported; the client must manually request a flush after writes have completed. The "NBDKIT_FLAG_FUA" flag will not be passed to the plugin's write callbacks. "NBDKIT_FUA_EMULATE" The client may request Forced Unit Access, but it is implemented by em- ulation, where nbdkit calls ".flush" after a write operation; this is semantically correct, but may hurt performance as it tends to flush more data than just what the client requested. The "NBDKIT_FLAG_FUA" flag will not be passed to the plugin's write callbacks. "NBDKIT_FUA_NATIVE" The client may request Forced Unit Access, which results in the "NBD- KIT_FLAG_FUA" flag being passed to the plugin's write callbacks (".pwrite", ".trim", and ".zero"). When the flag is set, these call- backs must not return success until the client's request has landed in persistent storage. The following defines are valid as successful return values for ".can_cache": "NBDKIT_CACHE_NONE" The server does not advertise caching support, and rejects any client-requested caching. Any ".cache" callback is ignored. "NBDKIT_CACHE_EMULATE" The nbdkit server advertises cache support to the client, where the client may request that the server cache a region of the export to po- tentially speed up future read and/or write operations on that region. The nbdkit server implements the caching by calling ".pread" and ignor- ing the results. This option exists to ease the implementation of a common form of caching; any ".cache" callback is ignored. "NBDKIT_CACHE_NATIVE" The nbdkit server advertises cache support to the client, where the client may request that the server cache a region of the export to po- tentially speed up future read and/or write operations on that region. The nbdkit server calls the ".cache" callback to perform the caching; if that callback is missing, the client's cache request succeeds with- out doing anything. Threads Each nbdkit plugin must declare its maximum thread safety model by defining the "THREAD_MODEL" macro. (This macro is used by "NBDKIT_REGISTER_PLU- GIN"). Additionally, a plugin may implement the ".thread_model" callback, called right after ".config_complete" to make a runtime decision on which thread model to use. The nbdkit server chooses the most restrictive model between the plugin's "THREAD_MODEL", the ".thread_model" if present, any restrictions requested by filters, and any limitations imposed by the oper- ating system. In "nbdkit --dump-plugin PLUGIN" output, the "max_thread_model" line matches the "THREAD_MODEL" macro, and the "thread_model" line matches what the system finally settled on after applying all restrictions. The possible settings for "THREAD_MODEL" are defined below. "#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_CONNECTIONS" Only a single handle can be open at any time, and all requests happen from one thread. Note this means only one client can connect to the server at any time. If a second client tries to connect it will block waiting for the first client to close the connection. "#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS" This is a safe default for most plugins. Multiple handles can be open at the same time, but requests are serial- ized so that for the plugin as a whole only one open/read/write/close (etc) request will be in progress at any time. This is a useful setting if the library you are using is not thread-safe. However performance may not be good. "#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_REQUESTS" Multiple handles can be open and multiple data requests can happen in parallel. However only one request will happen per handle at a time (but requests on different handles might happen concurrently). "#define THREAD_MODEL NBDKIT_THREAD_MODEL_PARALLEL" Multiple handles can be open and multiple data requests can happen in parallel (even on the same handle). The server may reorder replies, answering a later request before an earlier one. All the libraries you use must be thread-safe and reentrant, and any code that creates a file descriptor should atomically set "FD_CLOEXEC" if you do not want it accidentally leaked to another thread's child process. You may also need to provide mutexes for fields in your con- nection handle. If none of the above thread models are suitable, use "NBD- KIT_THREAD_MODEL_PARALLEL" and implement your own locking using "pthread_mutex_t" etc. Error handling If there is an error in the plugin, the plugin should call nbdkit_error(3) to report an error message. Then, the callback should return the appropri- ate error indication, eg. "NULL" or -1. More information about these functions and nbdkit_verror(3) can be found in the separate manual page about them. If your plugin does not overwrite global "errno" when returning from system call failures (usually true for plugins written in C, often false for plug- ins written in high level scripting languages), then you can set ".er- rno_is_preserved = 1" in the plugin struct. CALLBACKS ".name" const char *name; This field (a string) is required, and must contain only ASCII alphanumeric characters or non-leading dashes, and be unique amongst all plugins. ".version" const char *version; Plugins may optionally set a version string which is displayed in help and debugging output. (See also "VERSION" below) ".longname" const char *longname; An optional free text name of the plugin. This field is used in error mes- sages. ".description" const char *description; An optional multi-line description of the plugin. ".load" void load (void); This is called once just after the plugin is loaded into memory. You can use this to perform any global initialization needed by the plugin. ".unload" void unload (void); This may be called once just before the plugin is unloaded from memory. Note that it's not guaranteed that ".unload" will always be called (eg. the server might be killed or segfault), so you should try to make the plugin as robust as possible by not requiring cleanup. See also "SHUTDOWN" below. ".dump_plugin" void dump_plugin (void); This optional callback is called when the "nbdkit plugin --dump-plugin" command is used. It should print any additional informative "key=value" fields to stdout as needed. Prefixing the keys with the name of the plugin will avoid conflicts. ".config" int config (const char *key, const char *value); On the nbdkit command line, after the plugin filename, come an optional list of "key=value" arguments. These are passed to the plugin through this callback when the plugin is first loaded and before any connections are ac- cepted. This callback may be called zero or more times. Both "key" and "value" parameters will be non-NULL. The strings are owned by nbdkit but will remain valid for the lifetime of the plugin, so the plu- gin does not need to copy them. The key will be a non-empty string beginning with an ASCII alphabetic char- acter ("A-Z" "a-z"). The rest of the key must contain only ASCII alphanu- meric plus period, underscore or dash characters ("A-Z" "a-z" "0-9" "." "_" "-"). The value may be an arbitrary string, including an empty string. The names of "key"s accepted by plugins is up to the plugin, but you should probably look at other plugins and follow the same conventions. If the value is a relative path, then note that the server changes direc- tory when it starts up. See nbdkit_realpath(3). If nbdkit_stdio_safe(3) returns 1, the value of the configuration parameter may be used to trigger reading additional data through stdin (such as a password or inline script). If the ".config" callback is not provided by the plugin, and the user tries to specify any "key=value" arguments, then nbdkit will exit with an error. If there is an error, ".config" should call nbdkit_error(3) with an error message and return -1. ".magic_config_key" const char *magic_config_key; This optional string can be used to set a "magic" key used when parsing plugin parameters. It affects how "bare parameters" (those which do not contain an "=" character) are parsed on the command line. If "magic_config_key != NULL" then any bare parameters are passed to the ".config" method as: "config (magic_config_key, argv[i]);". If "magic_config_key" is not set then we behave as in nbdkit < 1.7: If the first parameter on the command line is bare then it is passed to the ".con- fig" method as: "config ("script", value);". Any other bare parameters give errors. ".config_complete" int config_complete (void); This optional callback is called after all the configuration has been passed to the plugin. It is a good place to do checks, for example that the user has passed the required parameters to the plugin. If there is an error, ".config_complete" should call nbdkit_error(3) with an error message and return -1. ".config_help" const char *config_help; This optional multi-line help message should summarize any "key=value" pa- rameters that it takes. It does not need to repeat what already appears in ".description". If the plugin doesn't take any config parameters you should probably omit this. ".thread_model" int thread_model (void) This optional callback is called after all the configuration has been passed to the plugin. It can be used to force a stricter thread model based on configuration, compared to "THREAD_MODEL". See "Threads" above for details. Attempts to request a looser (more parallel) model are silently ignored. If there is an error, ".thread_model" should call nbdkit_error(3) with an error message and return -1. ".get_ready" int get_ready (void); This optional callback is called before the server starts serving. It is called before the server forks or changes directory. It is ordinarily the last chance to do any global preparation that is needed to serve connec- tions. If there is an error, ".get_ready" should call nbdkit_error(3) with an er- ror message and return -1. ".after_fork" int after_fork (void); This optional callback is called before the server starts serving. It is called after the server forks and changes directory. If a plugin needs to create background threads (or uses an external library that creates threads) it should do so here, because background threads are killed by fork. However you should try to do as little as possible here because er- ror reporting is difficult. See "Callback lifecycle" above. If there is an error, ".after_fork" should call nbdkit_error(3) with an er- ror message and return -1. ".cleanup" void cleanup (void); This optional callback is called after the server has closed all connec- tions and is preparing to unload. It is only reached in the same cases that the ".after_fork" callback was used, making it a good place to clean up any background threads. However, it is not guaranteed that this call- back will be reached, so you should try to make the plugin as robust as possible by not requiring cleanup. See also "SHUTDOWN" below. ".preconnect" int preconnect (int readonly); This optional callback is called when a TCP connection has been made to the server. This happens early, before NBD or TLS negotiation. If TLS authen- tication is required to access the server, then it has not been negotiated at this point. For security reasons (to avoid denial of service attacks) this callback should be written to be as fast and take as few resources as possible. If you use this callback, only use it to do basic access control, such as checking nbdkit_peer_name(3), nbdkit_peer_pid(3), nbdkit_peer_uid(3), nbd- kit_peer_gid(3) against a list of permitted source addresses (see "PEER NAME" and nbdkit-ip-filter(1)). It may be better to do access control out- side the server, for example using TCP wrappers or a firewall. The "readonly" flag informs the plugin that the server was started with the -r flag on the command line. Returning 0 will allow the connection to continue. If there is an error or you want to deny the connection, call nbdkit_error(3) with an error message and return -1. ".list_exports" int list_exports (int readonly, int is_tls, struct nbdkit_exports *exports); This optional callback is called if the client tries to list the exports served by the plugin (using "NBD_OPT_LIST"). If the plugin does not supply this callback then the result of ".default_export" is advertised as the lone export. The NBD protocol defines "" as the default export, so this is suitable for plugins which ignore the export name and always serve the same content. See also "EXPORT NAME" below. The "readonly" flag informs the plugin that the server was started with the -r flag on the command line, which is the same value passed to ".precon- nect" and ".open". However, the NBD protocol does not yet have a way to let the client advertise an intent to be read-only even when the server al- lows writes, so this parameter may not be as useful as it appears. The "is_tls" flag informs the plugin whether this listing was requested af- ter the client has completed TLS negotiation. When running the server in a mode that permits but does not require TLS, be careful that any exports listed when "is_tls" is "false" do not leak unintended information. The "exports" parameter is an opaque object for collecting the list of ex- ports. Call "nbdkit_add_export" as needed to add specific exports to the list. int nbdkit_add_export (struct nbdkit_export *exports, const char *name, const char *description); The "name" must be a non-NULL, UTF-8 string between 0 and 4096 bytes in length. Export names must be unique. "description" is an optional de- scription of the export which some clients can display but which is other- wise unused (if you don't want a description, you can pass this parameter as "NULL"). The string(s) are copied into the exports list so you may free them immediately after calling this function. "nbdkit_add_export" returns 0 on success or -1 on failure; on failure nbdkit_error(3) has already been called, with "errno" set to a suitable value. There are also situations where a plugin may wish to duplicate the nbdkit default behavior of supplying an export list containing only the result of ".default_export" when ".list_exports" is missing; this is most common in a language binding where it is not known at compile time whether the language script will be providing an implementation for ".list_exports", and is done by calling "nbdkit_use_default_export". int nbdkit_use_default_export (struct nbdkit_export *exports); "nbdkit_use_default_export" returns 0 on success or -1 on failure; on fail- ure nbdkit_error(3) has already been called, with "errno" set to a suitable value. The plugin may also leave the export list empty, by not calling either helper. Once the plugin is happy with the list contents, returning 0 will send the list of exports back to the client. If there is an error, ".list_exports" should call nbdkit_error(3) with an error message and re- turn -1. ".default_export" const char *default_export (int readonly, int is_tls); This optional callback is called if the client tries to connect to the de- fault export "", where the plugin provides a UTF-8 string between 0 and 4096 bytes. If the plugin does not supply this callback, the connection continues with the empty name; if the plugin returns a valid string, nbdkit behaves as if the client had passed that string instead of an empty name, and returns that name to clients that support it (see the "NBD_INFO_NAME" response to "NBD_OPT_GO"). Similarly, if the plugin does not supply a ".list_exports" callback, the result of this callback determines what ex- port name to advertise to a client requesting an export list. The "readonly" flag informs the plugin that the server was started with the -r flag on the command line, which is the same value passed to ".precon- nect" and ".open". However, the NBD protocol does not yet have a way to let the client advertise an intent to be read-only even when the server al- lows writes, so this parameter may not be as useful as it appears. The "is_tls" flag informs the plugin whether the canonical name for the de- fault export is being requested after the client has completed TLS negotia- tion. When running the server in a mode that permits but does not require TLS, be careful that a default export name does not leak unintended infor- mation. If the plugin returns "NULL" or an invalid string (such as longer than 4096 bytes), the client is not permitted to connect to the default export. How- ever, this is not an error in the protocol, so it is not necessary to call nbdkit_error(3). ".open" void *open (int readonly); This is called when a new client connects to the nbdkit server. The call- back should allocate a handle and return it. This handle is passed back to other callbacks and could be freed in the ".close" callback. Note that the handle is completely opaque to nbdkit, but it must not be NULL. If you don't need to use a handle, return "NBDKIT_HANDLE_NOT_NEEDED" which is a static non-NULL pointer. The "readonly" flag informs the plugin that the server was started with the -r flag on the command line which forces connections to be read-only. Note that the plugin may additionally force the connection to be readonly (even if this flag is false) by returning false from the ".can_write" callback. So if your plugin can only serve read-only, you can ignore this parameter. If the plugin wants to differentiate the content it serves based on client input, then this is the spot to use nbdkit_export_name(3) to determine which export the client requested. See also "EXPORT NAME AND TLS" below. This callback is called after the NBD handshake has completed; if the server requires TLS authentication, then that has occurred as well. But if the server is set up to have optional TLS authentication, you may check nbdkit_is_tls(3) to learn whether the client has completed TLS authentica- tion. When running the server in a mode that permits but does not require TLS, be careful that you do not allow unauthenticated clients to cause a denial of service against authentication. If there is an error, ".open" should call nbdkit_error(3) with an error message and return "NULL". ".close" void close (void *handle); This is called when the client closes the connection. It should clean up any per-connection resources. Note there is no way in the NBD protocol to communicate close errors back to the client, for example if your plugin calls close(2) and you are check- ing for errors (as you should do). Therefore the best you can do is to log the error on the server. Well-behaved NBD clients should try to flush the connection before it is closed and check for errors, but obviously this is outside the scope of nbdkit. ".get_size" int64_t get_size (void *handle); This is called during the option negotiation phase of the protocol to get the size (in bytes) of the block device being exported. The returned size must be aY 0. If there is an error, ".get_size" should call nbdkit_error(3) with an error message and return -1. ".export_description" const char *export_description (void *handle); This is called during the option negotiation phase only if the client specifically requested an export description (see the "NBD_INFO_DESCRIP- TION" response to "NBD_OPT_GO"). Any description provided must be hu- man-readable UTF-8, no longer than 4096 bytes. Ideally, this description should match any description set during ".list_exports", but that is not enforced. If the plugin returns "NULL" or an invalid string (such as longer than 4096 bytes), or if this callback is omitted, no description is offered to the client. As this is not an error in the protocol, it is not necessary to call nbdkit_error(3). If the callback will not be returning a compile-time constant string, you may find nbdkit_strdup_intern(3) helpful for returning a value that avoids a memory leak. ".block_size" int block_size (void *handle, uint32_t *minimum, uint32_t *preferred, uint32_t *maximum); This is called during the option negotiation phase of the protocol to get the minimum, preferred and maximum block size (all in bytes) of the block device. The client should obey these constraints by not making requests which are smaller than the minimum size or larger than the maximum size, and usually making requests of a multiple of the preferred size. Further- more requests should be aligned to at least the minimum block size, and usually the preferred block size. "Preferred" block size in the NBD specification can be misinterpreted. It means the I/O size which does not have a penalty for read-modify-write. Even if the plugin implements this callback, this does not mean that all client requests will obey the constraints. A client could still ignore the constraints. nbdkit passes all requests through to the plugin, because what the plugin does depends on the plugin's policy. It might decide to serve the requests correctly anyway, or reject them with an error. Plugins can avoid this complexity by using nbdkit-blocksize-policy-filter(1) which allows both setting/adjusting the constraints, and selecting an error pol- icy. The minimum block size must be aY 1. The maximum block size must be ax 0xffff_ffff. minimum ax preferred ax maximum. As a special case, the plugin may return minimum == preferred == maximum == 0, meaning no information. If this callback is not used, then the NBD protocol assumes by default min- imum = 1, preferred = 4096. (Maximum block size depends on various fac- tors, see the NBD protocol specification, section "Block size con- straints"). ".can_write" int can_write (void *handle); This is called during the option negotiation phase to find out if the han- dle supports writes. If there is an error, ".can_write" should call nbdkit_error(3) with an er- ror message and return -1. This callback is not required. If omitted, then we return true iff a ".pwrite" callback has been defined. ".can_flush" int can_flush (void *handle); This is called during the option negotiation phase to find out if the han- dle supports the flush-to-disk operation. If there is an error, ".can_flush" should call nbdkit_error(3) with an er- ror message and return -1. This callback is not required. If omitted, then we return true iff a ".flush" callback has been defined. ".is_rotational" int is_rotational (void *handle); This is called during the option negotiation phase to find out if the back- ing disk is a rotational medium (like a traditional hard disk) or not (like an SSD). If true, this may cause the client to reorder requests to make them more efficient for a slow rotating disk. If there is an error, ".is_rotational" should call nbdkit_error(3) with an error message and return -1. This callback is not required. If omitted, then we return false. ".can_trim" int can_trim (void *handle); This is called during the option negotiation phase to find out if the plu- gin supports the trim/discard operation for punching holes in the backing storage. If there is an error, ".can_trim" should call nbdkit_error(3) with an error message and return -1. This callback is not required. If omitted, then we return true iff a ".trim" callback has been defined. ".can_zero" int can_zero (void *handle); This is called during the option negotiation phase to find out if the plu- gin wants the ".zero" callback to be utilized. Support for writing zeroes is still advertised to the client (unless the nbdkit-nozero-filter(1) is also used), so returning false merely serves as a way to avoid complicating the ".zero" callback to have to fail with "ENOTSUP" or "EOPNOTSUPP" on the connections where it will never be more efficient than using ".pwrite" up front. If there is an error, ".can_zero" should call nbdkit_error(3) with an error message and return -1. This callback is not required. If omitted, then for a normal zero request, nbdkit always tries ".zero" first if it is present, and gracefully falls back to ".pwrite" if ".zero" was absent or failed with "ENOTSUP" or "EOP- NOTSUPP". ".can_fast_zero" int can_fast_zero (void *handle); This is called during the option negotiation phase to find out if the plu- gin wants to advertise support for fast zero requests. If this support is not advertised, a client cannot attempt fast zero requests, and has no way to tell if writing zeroes offers any speedups compared to using ".pwrite" (other than compressed network traffic). If support is advertised, then ".zero" will have "NBDKIT_FLAG_FAST_ZERO" set when the client has requested a fast zero, in which case the plugin must fail with "ENOTSUP" or "EOPNOT- SUPP" up front if the request would not offer any benefits over ".pwrite". Advertising support for fast zero requests does not require that writing zeroes be fast, only that the result (whether success or failure) is fast, so this should be advertised when feasible. If there is an error, ".can_fast_zero" should call nbdkit_error(3) with an error message and return -1. This callback is not required. If omitted, then nbdkit returns true if ".zero" is absent or ".can_zero" returns false (in those cases, nbdkit fails all fast zero requests, as its fallback to ".pwrite" is not inher- ently faster), otherwise false (since it cannot be determined in advance if the plugin's ".zero" will properly honor the semantics of "NBD- KIT_FLAG_FAST_ZERO"). ".can_extents" int can_extents (void *handle); This is called during the option negotiation phase to find out if the plu- gin supports detecting allocated (non-sparse) regions of the disk with the ".extents" callback. If there is an error, ".can_extents" should call nbdkit_error(3) with an error message and return -1. This callback is not required. If omitted, then we return true iff a ".ex- tents" callback has been defined. ".can_fua" int can_fua (void *handle); This is called during the option negotiation phase to find out if the plu- gin supports the Forced Unit Access (FUA) flag on write, zero, and trim re- quests. If this returns "NBDKIT_FUA_NONE", FUA support is not advertised to the client; if this returns "NBDKIT_FUA_EMULATE", the ".flush" callback must work (even if ".can_flush" returns false), and FUA support is emulated by calling ".flush" after any write operation; if this returns "NBD- KIT_FUA_NATIVE", then the ".pwrite", ".zero", and ".trim" callbacks (if im- plemented) must handle the flag "NBDKIT_FLAG_FUA", by not returning until that action has landed in persistent storage. If there is an error, ".can_fua" should call nbdkit_error(3) with an error message and return -1. This callback is not required unless a plugin wants to specifically handle FUA requests. If omitted, nbdkit checks whether ".flush" exists, and be- haves as if this function returns "NBDKIT_FUA_NONE" or "NBDKIT_FUA_EMULATE" as appropriate. ".can_multi_conn" int can_multi_conn (void *handle); This is called during the option negotiation phase to find out if the plu- gin is prepared to handle multiple connections from a single client. If the plugin sets this to true then a client may try to open multiple connec- tions to the nbdkit server and spread requests across all connections to maximize parallelism. If the plugin sets it to false (which is the de- fault) then well-behaved clients should only open a single connection, al- though we cannot control what clients do in practice. Specifically it means that either the plugin does not cache requests at all. Or if it does cache them then the effects of a ".flush" request or setting "NBDKIT_FLAG_FUA" on a request must be visible across all connec- tions to the plugin before the plugin replies to that request. Properly working clients should send the same export name for each of these connections. If you use Linux nbd-client(8) option -C num with num > 1 then Linux checks this flag and will refuse to connect if ".can_multi_conn" is false. If there is an error, ".can_multi_conn" should call nbdkit_error(3) with an error message and return -1. This callback is not required. If omitted, then we return false. ".can_cache" int can_cache (void *handle); This is called during the option negotiation phase to find out if the plu- gin supports a cache or prefetch operation. This can return: "NBDKIT_CACHE_NONE" Cache support is not advertised to the client. "NBDKIT_CACHE_EMULATE" Caching is emulated by the server calling ".pread" and discarding the result. "NBDKIT_CACHE_NATIVE" Cache support is advertised to the client. The ".cache" callback will be called if it exists, otherwise all cache requests instantly succeed. If there is an error, ".can_cache" should call nbdkit_error(3) with an er- ror message and return -1. This callback is not required. If omitted, then we return "NBD- KIT_CACHE_NONE" if the ".cache" callback is missing, or "NBDKIT_CACHE_NA- TIVE" if it is defined. ".pread" int pread (void *handle, void *buf, uint32_t count, uint64_t offset, uint32_t flags); During the data serving phase, nbdkit calls this callback to read data from the backing store. "count" bytes starting at "offset" in the backing store should be read and copied into "buf". nbdkit takes care of all bounds- and sanity-checking, so the plugin does not need to worry about that. The parameter "flags" exists in case of future NBD protocol extensions; at this time, it will be 0 on input. The callback must read the whole "count" bytes if it can. The NBD protocol doesn't allow partial reads (instead, these would be errors). If the whole "count" bytes was read, the callback should return 0 to indicate there was no error. If there is an error (including a short read which couldn't be recovered from), ".pread" should call nbdkit_error(3) with an error message, and nbd- kit_set_error(3) to record an appropriate error (unless "errno" is suffi- cient), then return -1. ".pwrite" int pwrite (void *handle, const void *buf, uint32_t count, uint64_t offset, uint32_t flags); During the data serving phase, nbdkit calls this callback to write data to the backing store. "count" bytes starting at "offset" in the backing store should be written using the data in "buf". nbdkit takes care of all bounds- and sanity-checking, so the plugin does not need to worry about that. This function will not be called if ".can_write" returned false. The para- meter "flags" may include "NBDKIT_FLAG_FUA" on input based on the result of ".can_fua". The callback must write the whole "count" bytes if it can. The NBD proto- col doesn't allow partial writes (instead, these would be errors). If the whole "count" bytes was written successfully, the callback should return 0 to indicate there was no error. If there is an error (including a short write which couldn't be recovered from), ".pwrite" should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an appropriate error (unless "errno" is suf- ficient), then return -1. ".flush" int flush (void *handle, uint32_t flags); During the data serving phase, this callback is used to fdatasync(2) the backing store, ie. to ensure it has been completely written to a permanent medium. If that is not possible then you can omit this callback. This function will not be called directly by the client if ".can_flush" re- turned false; however, it may still be called by nbdkit if ".can_fua" re- turned "NBDKIT_FUA_EMULATE". The parameter "flags" exists in case of fu- ture NBD protocol extensions; at this time, it will be 0 on input. If there is an error, ".flush" should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then return -1. ".trim" int trim (void *handle, uint32_t count, uint64_t offset, uint32_t flags); During the data serving phase, this callback is used to "punch holes" in the backing store. If that is not possible then you can omit this call- back. This function will not be called if ".can_trim" returned false. The para- meter "flags" may include "NBDKIT_FLAG_FUA" on input based on the result of ".can_fua". If there is an error, ".trim" should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then return -1. ".zero" int zero (void *handle, uint32_t count, uint64_t offset, uint32_t flags); During the data serving phase, this callback is used to write "count" bytes of zeroes at "offset" in the backing store. This function will not be called if ".can_zero" returned false. On input, the parameter "flags" may include "NBDKIT_FLAG_MAY_TRIM" unconditionally, "NBDKIT_FLAG_FUA" based on the result of ".can_fua", and "NBD- KIT_FLAG_FAST_ZERO" based on the result of ".can_fast_zero". If "NBDKIT_FLAG_MAY_TRIM" is requested, the operation can punch a hole in- stead of writing actual zero bytes, but only if subsequent reads from the hole read as zeroes. If "NBDKIT_FLAG_FAST_ZERO" is requested, the plugin must decide up front if the implementation is likely to be faster than a corresponding ".pwrite"; if not, then it must immediately fail with "ENOTSUP" or "EOPNOTSUPP" (whether by nbdkit_set_error(3) or "errno") and preferably without modify- ing the exported image. It is acceptable to always fail a fast zero re- quest (as a fast failure is better than attempting the write only to find out after the fact that it was not fast after all). Note that on Linux, support for ioctl(BLKZEROOUT) is insufficient for determining whether a zero request to a block device will be fast (because the kernel will per- form a slow fallback when needed). The callback must write the whole "count" bytes if it can. The NBD proto- col doesn't allow partial writes (instead, these would be errors). If the whole "count" bytes was written successfully, the callback should return 0 to indicate there was no error. If there is an error, ".zero" should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then return -1. If this callback is omitted, or if it fails with "ENOTSUP" or "EOPNOTSUPP" (whether by nbdkit_set_error(3) or "errno"), then ".pwrite" will be used as an automatic fallback except when the client requested a fast zero. ".extents" int extents (void *handle, uint32_t count, uint64_t offset, uint32_t flags, struct nbdkit_extents *extents); During the data serving phase, this callback is used to detect allocated, sparse and zeroed regions of the disk. This function will not be called if ".can_extents" returned false. nbd- kit's default behaviour in this case is to treat the whole virtual disk as if it was allocated. Also, this function will not be called by a client that does not request structured replies (the --no-sr option of nbdkit can be used to test behavior when ".extents" is unavailable to the client). The callback should detect and return the list of extents overlapping the range "[offset...offset+count-1]". The "extents" parameter points to an opaque object which the callback should fill in by calling "nbdkit_add_ex- tent". See "Extents list" below. If there is an error, ".extents" should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then return -1. Extents list The plugin "extents" callback is passed an opaque pointer "struct nbd- kit_extents *extents". This structure represents a list of filesystem ex- tents describing which areas of the disk are allocated, which are sparse (aholesa), and, if supported, which are zeroes. The "extents" callback should scan the disk starting at "offset" and call "nbdkit_add_extent" for each extent found. Extents overlapping the range "[offset...offset+count-1]" should be re- turned if possible. However nbdkit ignores extents < offset so the plugin may, if it is easier to implement, return all extent information for the whole disk. The plugin may return extents beyond the end of the range. It may also return extent information for less than the whole range, but it must return at least one extent overlapping "offset". The extents must be added in ascending order, and must be contiguous. The "flags" parameter of the ".extents" callback may contain the flag "NBD- KIT_FLAG_REQ_ONE". This means that the client is only requesting informa- tion about the extent overlapping "offset". The plugin may ignore this flag, or as an optimization it may return just a single extent for "off- set". int nbdkit_add_extent (struct nbdkit_extents *extents, uint64_t offset, uint64_t length, uint32_t type); Add an extent covering "[offset...offset+length-1]" of one of the following four types: "type = 0" A normal, allocated data extent. "type = NBDKIT_EXTENT_HOLE|NBDKIT_EXTENT_ZERO" An unallocated extent, a.k.a. a aholea, which reads back as zeroes. This is the normal type of hole applicable to most disks. "type = NBDKIT_EXTENT_ZERO" An allocated extent which is known to contain only zeroes. "type = NBDKIT_EXTENT_HOLE" An unallocated extent (hole) which does not read back as zeroes. Note this should only be used in specialized circumstances such as when writing a plugin for (or to emulate) certain SCSI drives which do not guarantee that trimmed blocks read back as zeroes. "nbdkit_add_extent" returns 0 on success or -1 on failure. On failure nbd- kit_error(3) and/or nbdkit_set_error(3) has already been called. "errno" will be set to a suitable value. ".cache" int cache (void *handle, uint32_t count, uint64_t offset, uint32_t flags); During the data serving phase, this callback is used to give the plugin a hint that the client intends to make further accesses to the given region of the export. The nature of caching/prefetching is not specified further by the NBD spec- ification. For example, a server may place limits on how much may be cached at once, and there is no way to control if writes to a cached area have write-through or write-back semantics. In fact, the cache command can always fail and still be compliant, and success might not guarantee a per- formance gain. If this callback is omitted, then the results of ".can_cache" determine whether nbdkit will reject cache requests, treat them as instant success, or emulate caching by calling ".pread" over the same region and ignoring the results. This function will not be called if ".can_cache" did not return "NBD- KIT_CACHE_NATIVE". The "flags" parameter exists in case of future NBD protocol extensions; at this time, it will be 0 on input. A plugin must fail this function if "flags" includes an unrecognized flag, as that may indicate a requirement that the plugin must comply with to provide a specific caching semantic. If there is an error, ".cache" should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then return -1. ".errno_is_preserved" This field defaults to 0; if non-zero, nbdkit can reliably use the value of "errno" when a callback reports failure, rather than the plugin having to call nbdkit_set_error(3). UMASK All plugins will see a umask(2) of 0022. PARSING COMMAND LINE PARAMETERS nbdkit provides several functions to help plugins and filters to parse com- mand line parameters. These are documented in separate man pages: Parse disk sizes (eg. "size=100M") nbdkit_parse_size(3) Parse numbers nbdkit_parse_int(3) nbdkit_parse_unsigned(3) nbdkit_parse_int8_t(3) nbdkit_parse_uint8_t(3) nbdkit_parse_int16_t(3) nbd- kit_parse_uint16_t(3) nbdkit_parse_int32_t(3) nbdkit_parse_uint32_t(3) nbdkit_parse_int64_t(3) nbdkit_parse_uint64_t(3) Parse booleans (eg. "setting=true") nbdkit_parse_bool(3) Parse probabilities (eg. "rate=50%") nbdkit_parse_probability(3) Parse delays and sleeps (eg. "delay=33ms") nbdkit_parse_delay(3) Reading passwords and other secrets nbdkit_read_password(3) Safely interacting with stdin and stdout nbdkit_stdio_safe(3) Filenames and paths nbdkit_absolute_path(3) nbdkit_realpath(3) SLEEPING A plugin or filter that needs to sleep may call sleep(2), nanosleep(2) and similar. However that can cause nbdkit to delay excessively when shutting down (since it must wait for any plugin or filter which is sleeping). To avoid this plugins and filters should call nbdkit_nanosleep(3) instead. EXPORT NAME AND TLS If the client negotiated an NBD export name with nbdkit then plugins may read this from any connected callback. Nbdkit's normal behaviour is to ac- cept any export name passed by the client, log it in debug output, but oth- erwise ignore it. By calling nbdkit_export_name(3) plugins may choose to filter by export name or serve different content. nbdkit_is_tls(3) can be used to find the status of TLS negotiation on the current connection. STRING LIFETIME Some callbacks are specified to return "const char *", even when a plugin may not have a suitable compile-time constant to return. Returning dynami- cally-allocated memory for such a callback would induce a memory leak or otherwise complicate the plugin to perform additional bookkeeping. For these cases, nbdkit provides several convenience functions for creating a copy of a string for better lifetime management: nbdkit_strdup_intern(3), nbdkit_strndup_intern(3), nbdkit_printf_intern(3), nbdkit_vprintf_intern(3). PEER NAME In any connected callback you can get the source address of the client us- ing nbdkit_peer_name(3). If the client is connected over a Unix domain socket, you may also be able to get the client process ID, user ID, group ID and security context using: nbdkit_peer_pid(3), nbdkit_peer_uid(3), nbd- kit_peer_gid(3) and nbdkit_peer_security_context(3). If the client is con- nected using TLS and presented a client certificate then the Distinguished Name (DN) may be read using nbdkit_peer_tls_dn(3) and the issuer's DN by nbdkit_peer_tls_issuer_dn(3). SHUTDOWN When nbdkit receives certain signals it will shut down (see "SIGNALS" in nbdkit(1)). The server will wait for any currently running plugin call- backs to finish, call ".close" on those connections, then call the ".cleanup" and ".unload" callbacks before unloading the plugin. Note that it's not guaranteed this can always happen (eg. the server might be killed by "SIGKILL" or segfault). See nbdkit_shutdown(3) and nbdkit_disconnect(3) for how to request server shutdown or client disconnection from within plugins. VERSION Compile-time version of nbdkit The macros "NBDKIT_VERSION_MAJOR", "NBDKIT_VERSION_MINOR" and "NBDKIT_VER- SION_MICRO" expand to integers containing the version of the nbdkit headers that you are compiling against. "NBDKIT_VERSION_MAJOR" is always 1. "NBDKIT_VERSION_MINOR" is even for stable releases of nbdkit and odd for development releases. The macro "NBDKIT_VERSION_STRING" expands to the same version as a string. Run-time version of nbdkit When the plugin is loaded into nbdkit, it may not be the same version that it was compiled against. nbdkit guarantees backwards compatibility of the API and ABI, so provided that nbdkit is the same version or newer, the plu- gin will still work. There is no way to get the version of nbdkit from the plugin. Version of the plugin The plugin itself can use any versioning scheme you want, and put any string into the ".version" field of the plugin struct (or leave the field NULL). API version See "WRITING AN NBDKIT PLUGIN" above. DEBUGGING Run the server with -f and -v options so it doesn't fork and you can see debugging information: nbdkit -fv ./myplugin.so [key=value [key=value [...]]] To print debugging information from within the plugin, call nbdkit_de- bug(3). Note that nbdkit_debug(3) only prints things when the server is in verbose mode (-v option). Debug Flags The -v option switches general debugging on or off, and this debugging should be used for messages which are useful for all users of your plugin. In cases where you want to enable specific extra debugging to troubleshoot bugs in plugins or filters a mainly for use by the plugin/filter developers themselves a you can define Debug Flags. These are global ints called "my- plugin_debug_*": int myplugin_debug_foo; int myplugin_debug_bar; ... if (myplugin_debug_foo) { nbdkit_debug ("lots of extra debugging about foo: ..."); } Debug Flags can be controlled on the command line using the -D (or --debug) option: nbdkit -f -v -D myplugin.foo=1 -D myplugin.bar=2 myplugin [...] Note "myplugin" is the name passed to ".name" in the "struct nbdkit_plu- gin". You don't have to declare debug flags, they are found automatically using dlsym(3). You should only use this feature for debug settings. For general settings use ordinary plugin parameters. Debug Flags can only be C ints. They are not supported by non-C language plugins. For convenience '.' characters are replaced with '_' characters in the variable name, so both of these parameters: -D myplugin.foo_bar=1 -D myplugin.foo.bar=1 correspond to the plugin variable "myplugin_debug_foo_bar". COMPILING THE PLUGIN Plugins should be compiled as shared libraries. There are various ways to achieve this, but most Linux compilers support a -shared option to create the shared library directly, for example: gcc -fPIC -shared myplugin.c -o myplugin.so Note that the shared library will have undefined symbols for functions that you call like nbdkit_parse_int(3) or nbdkit_error(3). These will be re- solved by the server binary when nbdkit dlopens the plugin. PKG-CONFIG/PKGCONF nbdkit provides a pkg-config/pkgconf file called "nbdkit.pc" which should be installed on the correct path when the nbdkit plugin development envi- ronment is installed. You can use this in autoconf configure.ac scripts to test for the development environment: PKG_CHECK_MODULES([NBDKIT], [nbdkit >= 1.2.3]) The above will fail unless nbdkit aY 1.2.3 and the header file is in- stalled, and will set "NBDKIT_CFLAGS" and "NBDKIT_LIBS" appropriately for compiling plugins. You can also run pkg-config/pkgconf directly, for example: if ! pkg-config nbdkit --exists; then echo "you must install the nbdkit plugin development environment" exit 1 fi You can also substitute the plugindir variable by doing: PKG_CHECK_VAR([NBDKIT_PLUGINDIR], [nbdkit], [plugindir]) which defines "$(NBDKIT_PLUGINDIR)" in automake-generated Makefiles. If nbdkit development headers are installed in a non-standard location then you may need to compile plugins using: gcc -fPIC -shared myplugin.c -o myplugin.so \ `pkg-config nbdkit --cflags --libs` INSTALLING THE PLUGIN The plugin is a "*.so" file and possibly a manual page. You can of course install the plugin "*.so" file wherever you want, and users will be able to use it by running: nbdkit /path/to/plugin.so [args] However if the shared library has a name of the form "nbdkit-name-plu- gin.so" and if the library is installed in the $plugindir directory, then users can be run it by only typing: nbdkit name [args] The location of the $plugindir directory is set when nbdkit is compiled and can be found by doing: nbdkit --dump-config If using the pkg-config/pkgconf system then you can also find the plugin directory at compile time by doing: pkg-config nbdkit --variable=plugindir WRITING PLUGINS IN C++ Plugins in C++ work almost exactly like those in C, but the way you define the "nbdkit_plugin" struct is slightly different: namespace { nbdkit_plugin create_plugin() { nbdkit_plugin plugin = nbdkit_plugin (); plugin.name = "myplugin"; plugin.open = myplugin_open; plugin.get_size = myplugin_get_size; plugin.pread = myplugin_pread; plugin.pwrite = myplugin_pwrite; return plugin; } } static struct nbdkit_plugin plugin = create_plugin (); NBDKIT_REGISTER_PLUGIN(plugin) WRITING PLUGINS IN OTHER PROGRAMMING LANGUAGES You can also write nbdkit plugins in Go, Lua, OCaml, Perl, Python, Rust, shell script or Tcl. Other programming languages may be offered in future. Ruby plugin support was removed in nbdkit 1.40. For more information see: nbdkit-cc-plugin(3), nbdkit-golang-plugin(3), nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3), nbd- kit-python-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbd- kit-tcl-plugin(3) . Plugins written in scripting languages may also be installed in $plugindir. These must be called "nbdkit-name-plugin" without any extension. They must be executable, and they must use the shebang header (see "Shebang scripts" in nbdkit(1)). For example a plugin written in Perl called "foo.pl" might be installed like this: $ head -1 foo.pl #!/usr/sbin/nbdkit perl $ sudo install -m 0755 foo.pl $plugindir/nbdkit-foo-plugin and then users will be able to run it like this: $ nbdkit foo [args ...] SEE ALSO nbdkit(1), nbdkit-nozero-filter(1), nbdkit-tls-fallback-filter(1), nbd- kit-filter(3). Utility functions provided by nbdkit for plugins and filters to use: nbdkit_absolute_path(3), nbdkit_debug(3), nbdkit_debug_hexdump(3), nbd- kit_disconnect(3), nbdkit_error(3), nbdkit_export_name(3), nbd- kit_is_tls(3), nbdkit_nanosleep(3), nbdkit_parse_bool(3), nbdkit_parse_de- lay(3), nbdkit_parse_int(3), nbdkit_parse_int16_t(3), nbd- kit_parse_int32_t(3), nbdkit_parse_int64_t(3), nbdkit_parse_int8_t(3), nbd- kit_parse_probability(3), nbdkit_parse_size(3), nbdkit_parse_uint16_t(3), nbdkit_parse_uint32_t(3), nbdkit_parse_uint64_t(3), nbd- kit_parse_uint8_t(3), nbdkit_parse_unsigned(3), nbdkit_peer_gid(3), nbd- kit_peer_name(3), nbdkit_peer_pid(3), nbdkit_peer_security_context(3), nbd- kit_peer_tls_dn(3). nbdkit_peer_tls_issuer_dn(3). nbdkit_peer_uid(3), nbdkit_printf_intern(3), nbdkit_read_password(3), nbdkit_realpath(3), nbd- kit_set_error(3), nbdkit_shutdown(3), nbdkit_stdio_safe(3), nbd- kit_strdup_intern(3), nbdkit_strndup_intern(3), nbdkit_vdebug(3), nbd- kit_verror(3), nbdkit_vprintf_intern(3). Standard plugins provided by nbdkit: nbdkit-blkio-plugin(1), nbdkit-cdi-plugin(1), nbdkit-curl-plugin(1), nbd- kit-data-plugin(1), nbdkit-eval-plugin(1), nbdkit-example1-plugin(1), nbd- kit-example2-plugin(1), nbdkit-example3-plugin(1), nbdkit-example4-plu- gin(1), nbdkit-file-plugin(1), nbdkit-floppy-plugin(1), nbdkit-full-plu- gin(1), nbdkit-gcs-plugin(1), nbdkit-guestfs-plugin(1), nbdkit-info-plu- gin(1), nbdkit-iso-plugin(1), nbdkit-libvirt-plugin(1), nbdkit-lin- uxdisk-plugin(1), nbdkit-memory-plugin(1), nbdkit-nbd-plugin(1), nbd- kit-nfs-plugin(1), nbdkit-null-plugin(1), nbdkit-ondemand-plugin(1), nbd- kit-ones-plugin(1), nbdkit-partitioning-plugin(1), nbdkit-pattern-plu- gin(1), nbdkit-random-plugin(1), nbdkit-S3-plugin(1), nbdkit-sparse-ran- dom-plugin(1), nbdkit-split-plugin(1), nbdkit-ssh-plugin(1), nbdkit-tm- pdisk-plugin(1), nbdkit-torrent-plugin(1), nbdkit-vddk-plugin(1), nbd- kit-vram-plugin(1), nbdkit-zero-plugin(1) ; nbdkit-cc-plugin(3), nbd- kit-golang-plugin(3), nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbd- kit-perl-plugin(3), nbdkit-python-plugin(3), nbdkit-rust-plugin(3), nbd- kit-sh-plugin(3), nbdkit-tcl-plugin(3) . AUTHORS Eric Blake Richard W.M. Jones Pino Toscano COPYRIGHT Copyright Red Hat LICENSE Redistribution and use in source and binary forms, with or without modifi- cation, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright no- tice, this list of conditions and the following disclaimer in the docu- mentation and/or other materials provided with the distribution. * Neither the name of Red Hat nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EX- PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- CLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS BE LIABLE FOR ANY DI- RECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SER- VICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABIL- ITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAM- AGE. nbdkit-1.46.2 2026-08-30 nbdkit-plugin(3)
NAME | SYNOPSIS | DESCRIPTION | WRITING AN NBDKIT PLUGIN | CALLBACKS | UMASK | PARSING COMMAND LINE PARAMETERS | SLEEPING | EXPORT NAME AND TLS | STRING LIFETIME | PEER NAME | SHUTDOWN | VERSION | DEBUGGING | COMPILING THE PLUGIN | INSTALLING THE PLUGIN | WRITING PLUGINS IN C++ | WRITING PLUGINS IN OTHER PROGRAMMING LANGUAGES | SEE ALSO | AUTHORS | COPYRIGHT | LICENSE
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=nbdkit-plugin&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>