NCDU(1) General Commands Manual NCDU(1) NAME ncdu -- NCurses Disk Usage SYNOPSIS ncdu [-f file] [-o file] [-e, --extended, --no-extended] [--ignore-config] [-x, --one-file-system, --cross-file-system] [--exclude pattern] [-X, --exclude-from file] [--include-caches, --exclude-caches] [-L, --follow-symlinks, --no-follow-symlinks] [--include-kernfs, --exclude-kernfs] [--exclude-firmlinks, --follow-firmlinks] [-0, -1, -2] [-q, --slow-ui-updates, --fast-ui-updates] [--enable-shell, --disable-shell] [--enable-delete, --disable-delete] [--enable-refresh, --disable-refresh] [-r] [--si, --no-si] [--disk-usage, --apparent-size] [--show-hidden, --hide-hidden] [--show-itemcount, --hide-itemcount] [--show-mtime, --hide-mtime] [--show-graph, --hide-graph] [--show-percent, --hide-percent] [--graph-style hash | half-block | eighth-block] [--sort column] [--enable-natsort, --disable-natsort] [--group-directories-first, --no-group-directories-first] [--confirm-quit, --no-confirm-quit] [--confirm-delete, --no-confirm-delete] [--color off | dark | dark-bg] [path] ncdu [-h, --help] ncdu [-v, -V, --version] DESCRIPTION ncdu (NCurses Disk Usage) is an interactive curses-based version of the well-known du(1), and provides a fast way to see what directories are using your disk space. OPTIONS Mode Selection -h, --help Print a short help message and quit. -v, -V, --version Print version and quit. -f file Load the given file, which has earlier been created with the -o flag. If file is equivalent to '-', the file is read from standard input. For the sake of preventing a screw-up, the current version of ncdu will assume that the directory information in the imported file does not represent the filesystem on which the file is being im- ported. That is, the refresh, file deletion and shell spawning op- tions in the browser will be disabled. dir Scan the given directory. -o file Export all necessary information to file instead of opening the browser interface. If file is '-', the data is written to standard output. See the examples section below for some handy use cases. Be warned that the exported data may grow quite large when export- ing a directory with many files. 10.000 files will get you an ex- port in the order of 600 to 700 KiB uncompressed, or a little over 100 KiB when compressed with gzip. This scales linearly, so be prepared to handle a few tens of megabytes when dealing with mil- lions of files. -e, --extended, --no-extended Enable/disable extended information mode. This will, in addition to the usual file information, also read the ownership, permissions and last modification time for each file. This will result in higher memory usage (by roughly ~30%) and in a larger output file when exporting. When using the file export/import function, this flag should be added both when exporting (to make sure the information is added to the export) and when importing (to read this extra information in memory). This flag has no effect when importing a file that has been exported without the extended information. This enables viewing and sorting by the latest child mtime, or mod- ified time, using 'm' and 'M', respectively. --ignore-config Do not attempt to load any configuration files. Scan Options These options affect the scanning progress, they have no effect when im- porting directory information from a file. -x, --one-file-system Do not cross filesystem boundaries, i.e. only count files and di- rectories on the same filesystem as the directory being scanned. --cross-file-system Do cross filesystem boundaries. This is the default, but can be specified to overrule a previously configured -x. --exclude pattern Exclude files that match pattern. The files are still displayed by default, but are not counted towards the disk usage statistics. This argument can be added multiple times to add more patterns. -X, --exclude-from file Exclude files that match any pattern in file. Patterns should be separated by a newline. --include-caches, --exclude-caches Include (default) or exclude directories containing CACHEDIR.TAG. Excluded cache directories are still displayed, but their contents will not be scanned or counted towards the disk usage statistics. https://bford.info/cachedir/ -L, --follow-symlinks, --no-follow-symlinks Follow (or not) symlinks and count the size of the file they point to. This option does not follow symlinks to directories and will cause each symlinked file to count as a unique file. This is dif- ferent from how hard links are handled. The exact counting behav- ior of this flag is subject to change in the future. --include-kernfs, --exclude-kernfs (Linux only) Include (default) or exclude Linux pseudo filesystems such as /proc (procfs) and /sys (sysfs). The complete list of currently known pseudo filesystems is: binfmt, bpf, cgroup, cgroup2, debug, devpts, proc, pstore, security, selinux, sys, trace. --exclude-firmlinks, --follow-firmlinks (MacOS only) Exclude or follow firmlinks. Interface Options -0 Don't give any feedback while scanning a directory or importing a file, except when a fatal error occurs. Ncurses will not be ini- tialized until the scan is complete. When exporting the data with -o, ncurses will not be initialized at all. This option is the de- fault when exporting to standard output. -1 Write progress information to the terminal, but don't open a full- screen ncurses interface. This option is the default when export- ing to a file. In some cases, the ncurses browser interface which you'll see after the scan/import is complete may look garbled when using this op- tion. If you're not exporting to a file, -2 is usually a better choice. -2 Show a full-screen ncurses interface while scanning a directory or importing a file. This is the only interface that provides feed- back on any non-fatal errors while scanning. -q, --slow-ui-updates, --fast-ui-updates Change the UI update interval while scanning or importing. ncdu updates the screen 10 times a second by default (with --fast-ui-updates ), this can be decreased to once every 2 seconds with -q or --slow-ui-updates. This option can be used to save bandwidth over remote connections. This option has no effect in combination with -0. --enable-shell, --disable-shell Enable or disable shell spawning from the file browser. This fea- ture is enabled by default when scanning a live directory and dis- abled when importing from file. --enable-delete, --disable-delete Enable or disable the built-in file deletion feature. This feature is enabled by default when scanning a live directory and disabled when importing from file. Explicitly disabling the deletion fea- ture can work as a safeguard to prevent accidental data loss. --enable-refresh, --disable-refresh Enable or disable directory refreshing from the file browser. This feature is enabled by default when scanning a live directory and disabled when importing from file. -r Read-only mode. When given once, this is an alias for --disable-delete, when given twice it will also add --disable-shell, thus ensuring that there is no way to modify the file system from within ncdu. --si, --no-si List sizes using base 10 prefixes, that is, powers of 1000 (kB, MB, etc), as defined in the International System of Units (SI), instead of the usual base 2 prefixes (KiB, MiB, etc). --disk-usage, --apparent-size Select whether to display disk usage (default) or apparent sizes. Can also be toggled in the file browser with the 'a' key. --show-hidden, --hide-hidden Show (default) or hide "hidden" and excluded files. Can also be toggled in the file browser with the 'e' key. --show-itemcount, --hide-itemcount Show or hide (default) the item counts column. Can also be toggled in the file browser with the 'c' key. --show-mtime, --hide-mtime Show or hide (default) the last modification time column. Can also be toggled in the file browser with the 'm' key. This option is ignored when not in extended mode, see -e. --show-graph, --hide-graph Show (default) or hide the relative size bar column. Can also be toggled in the file browser with the 'g' key. --show-percent, --hide-percent Show (default) or hide the relative size percent column. Can also be toggled in the file browser with the 'g' key. --graph-style hash | half-block | eighth-block Change the way that the relative size bar column is drawn. Recog- nized values are hash to draw ASCII '#' characters (default and most portable), half-block to use half-block drawing characters or eighth-block to use eighth-block drawing characters. Eighth-block characters are the most precise but may not render correctly in all terminals. --sort column Change the default column to sort on. Accepted values are disk-usage (the default), name, apparent-size, itemcount or mtime. The latter only makes sense in extended mode, see -e. The column name can be suffixed with -asc or -desc to change the order to ascending or descending, respectively. For example, --sort=name-desc to sort by name in descending order. --enable-natsort, --disable-natsort Enable (default) or disable natural sort when sorting by file name. --group-directories-first, --no-group-directories-first Sort (or not) directories before files. --confirm-quit, --no-confirm-quit Require a confirmation before quitting ncdu. Can be helpful when you accidentally press 'q' during or after a very long scan. --confirm-delete, --no-confirm-delete Require a confirmation before deleting a file or directory. En- abled by default, but can be disabled if you're absolutely sure you won't accidentally press 'd'. --color off | dark | dark-bg Set the color scheme. The following schemes are recognized: off to disable colors, dark for a color scheme intended for dark back- grounds and dark-bg for a variation of the dark color scheme that also works in terminals with a light background. The default is off. CONFIGURATION ncdu can be configured by placing command-line options in /etc/ncdu.conf or $HOME/.config/ncdu/config. If both files exist, the system configuration will be loaded before the user configuration, allowing users to override options set in the system configuration. Options given on the command line will override options set in the configuration files. The files will not be read at all when --ignore-config is given on the command line. The configuration file format is simply one command line option per line. Lines starting with '#' are ignored. A line can be prefixed with '@' to suppress errors while parsing the option. Example configuration file: # Always enable extended mode -e # Disable file deletion --disable-delete # Exclude .git directories --exclude .git # Read excludes from ~/.ncduexcludes, ignore error if the file does not exist @--exclude-from ~/.ncduexcludes KEYS ? Open help + keys + about screen up, down, j, k Cycle through the items right, enter, l Open selected directory left, <, h Go to parent directory n Order by filename (press again for descending order) s Order by filesize (press again for descending order) C Order by number of items (press again for descending order) a Toggle between showing disk usage and showing apparent size. M Order by latest child mtime, or modified time (press again for de- scending order). Requires the -e flag. d Delete the selected file or directory. An error message will be shown when the contents of the directory do not match or do not ex- ist anymore on the filesystem. t Toggle dirs before files when sorting. g Toggle between showing percentage, graph, both, or none. Percent- age is relative to the size of the current directory, graph is rel- ative to the largest item in the current directory. c Toggle display of child item counts. m Toggle display of latest child mtime, or modified time. Requires the -e flag. e Show/hide 'hidden' or 'excluded' files and directories. Be aware that even if you can't see the hidden files and directories, they are still there and they are still included in the directory sizes. If you suspect that the totals shown at the bottom of the screen are not correct, make sure you haven't enabled this option. i Show information about the current selected item. r Refresh/recalculate the current directory. b Spawn shell in current directory. ncdu determines your preferred shell from the NCDU_SHELL or SHELL environment variable (in that order), or calls /bin/sh if neither are set. This allows you to also configure another command to be run when he 'b' key is pressed. For example, to spawn the vifm(1) file manager instead of a shell, run ncdu as follows: NCDU_SHELL=vifm ncdu The NCDU_LEVEL environment variable is set or incremented before spawning the shell, allowing you to detect if your shell is running from within ncdu. This can be useful to avoid nesting multiple in- stances, although ncdu itself does not (currently) warn about or prevent this situation. q Quit FILE FLAGS Entries in the browser interface may be prefixed by a one-character flag. These flags have the following meaning: ! An error occurred while reading this directory. . An error occurred while reading a subdirectory, so the indicated size may not be correct. < File or directory is excluded from the statistics by using exclude patterns. > Directory is on another filesystem. ^ Directory is excluded from the statistics due to being a Linux pseudo filesystem. @ This is neither a file nor a folder (symlink, socket, ...). H Same file was already counted (hard link). e Empty directory. EXAMPLES To scan and browse the directory you're currently in, all you need is a simple: ncdu To scan a full filesystem, for example your root filesystem, you'll want to use -x: ncdu -x / Since scanning a large directory may take a while, you can scan a directory and export the results for later viewing: ncdu -1xo- / | gzip >export.gz # ...some time later: zcat export.gz | ncdu -f- To export from a cron job, make sure to replace -1 with -0 to suppress un- necessary progress output. You can also export a directory and browse it once scanning is done: ncdu -o- | tee export.file | ./ncdu -f- The same is possible with gzip compression, but is a bit kludgey: ncdu -o- | gzip | tee export.gz | gunzip | ./ncdu -f- To scan a system remotely, but browse through the files locally: ssh -C user@system ncdu -o- / | ./ncdu -f- The -C option to ssh enables compression, which will be very useful over slow links. Remote scanning and local viewing has two major advantages when compared to running ncdu directly on the remote system: You can browse through the scanned directory on the local system without any network la- tency, and ncdu does not keep the entire directory structure in memory when exporting, so this won't consume much memory on the remote system. SEE ALSO du(1), tree(1). ncdu has a website: https://dev.yorhel.nl/ncdu AUTHORS Written by Yorhel <projects@yorhel.nl> BUGS Directory hard links are not supported. They are not detected as being hard links, and will thus get scanned and counted multiple times. Some minor glitches may appear when displaying filenames that contain multibyte or multicolumn characters. All sizes are internally represented as a signed 64bit integer. If you have a directory larger than 8 EiB minus one byte, ncdu will clip its size to 8 EiB minus one byte. When deleting or refreshing items in a directory with a clipped size, the resulting sizes will be incorrect. Item counts are stored in a 32-bit integer without overflow detection. If you have a directory with more than 2 billion files, quite literally anything can hap- pen. On macOS 10.15 and later, running ncdu on the root directory without --exclude-firmlinks may cause directories to be scanned and counted multi- ple times. Firmlink cycles are not detected, so it may also cause ncdu to get stuck in an infinite loop and eventually run out of memory. Please report any other bugs you may find at the bug tracker, which can be found on the web site at https://dev.yorhel.nl/ncdu FreeBSD ports 15.quarterly March 5, 2025 NCDU(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION | KEYS | FILE FLAGS | EXAMPLES | SEE ALSO | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ncdu&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>