notcurses_init(3) notcurses_init(3) NAME notcurses_init - initialize a Notcurses instance SYNOPSIS #include <notcurses/notcurses.h> #define NCOPTION_INHIBIT_SETLOCALE 0x0001ull #define NCOPTION_NO_CLEAR_BITMAPS 0x0002ull #define NCOPTION_NO_WINCH_SIGHANDLER 0x0004ull #define NCOPTION_NO_QUIT_SIGHANDLERS 0x0008ull #define NCOPTION_PRESERVE_CURSOR 0x0010ull #define NCOPTION_SUPPRESS_BANNERS 0x0020ull #define NCOPTION_NO_ALTERNATE_SCREEN 0x0040ull #define NCOPTION_NO_FONT_CHANGES 0x0080ull #define NCOPTION_DRAIN_INPUT 0x0100ull #define NCOPTION_SCROLLING 0x0200ull #define NCOPTION_CLI_MODE (NCOPTION_NO_ALTERNATE_SCREEN \ |NCOPTION_NO_CLEAR_BITMAPS \ |NCOPTION_PRESERVE_CURSOR \ |NCOPTION_SCROLLING) typedef enum { NCLOGLEVEL_SILENT, // print nothing once fullscreen service begins NCLOGLEVEL_PANIC, // default. print diagnostics before we crash/exit NCLOGLEVEL_FATAL, // we're hanging around, but we've had a horrible fault NCLOGLEVEL_ERROR, // we can't keep doing this, but we can do other things NCLOGLEVEL_WARNING, // you probably don't want what's happening to happen NCLOGLEVEL_INFO, // "standard information" NCLOGLEVEL_VERBOSE, // "detailed information" NCLOGLEVEL_DEBUG, // this is honestly a bit much NCLOGLEVEL_TRACE, // there's probably a better way to do what you want } ncloglevel_e; typedef struct notcurses_options { const char* termtype; ncloglevel_e loglevel; unsigned margin_t, margin_r, margin_b, margin_l; uint64_t flags; // from NCOPTION_* bits } notcurses_options; struct notcurses* notcurses_init(const notcurses_options* opts, FILE* fp); void notcurses_version_components(int* major, int* minor, int* patch, int* tweak); int notcurses_cursor_enable(struct notcurses* nc, int y, int x); int notcurses_cursor_disable(struct notcurses* nc); int notcurses_cursor_yx(const struct notcurses* nc, int* y, int* x); int notcurses_lex_margins(const char* op, notcurses_options* opts); int notcurses_default_foreground(const struct notcurses* nc, uint32_t* fg); int notcurses_default_background(const struct notcurses* nc, uint32_t* bg); DESCRIPTION notcurses_init prepares the terminal for cursor-addressable (multiline) mode, writing to some FILE. If the FILE provided as fp is NULL, stdout will be used. Whatever FILE is used must be writable, is ideally fully buffered, and must be byte-oriented (see fwide(3)). If the FILE is not connected to a terminal (for example when redirected to a file), /dev/tty will be opened (if possible) for communication with the controlling termi- nal. Most output (including all styling and coloring) is written to the FILE; only queries need be sent to a true terminal. If no terminal is available (for example when running as a daemon), defaults regarding such things as screen size and the palette are assumed. The struct notcurses_option passed as opts controls behavior. Passing a NULL opts is equivalent to passing an all-zero (default) opts. A process can have only one Notcurses context active at a time; calling notcurses_init again before calling notcurses_stop will return NULL (this is reliable even if called concurrently from two threads). On success, a pointer to a valid struct notcurses is returned. NULL is re- turned on failure. Before the process exits, notcurses_stop(3) should be called to reset the terminal and free up resources. An appropriate terminfo(5) entry must exist for the terminal. This entry is usually selected using the value of the TERM environment variable (see getenv(3)), but a non-NULL value for termtype will override this (terminfo is not used on Microsoft Windows, where it is neither meaningful nor neces- sary to define TERM). An invalid terminfo specification can lead to re- duced performance, reduced display capabilities, and/or display errors. Notcurses natively targets 24bpp/8bpc RGB color, and it is thus desirable to use a terminal with the rgb capability (e.g. xterm's xterm-direct). Colors will otherwise be quantized down to whatever the terminal supports. If the terminal advertises support for an "alternate screen" via the smcup terminfo capability, Notcurses will employ it by default. This can be pre- vented by setting NCOPTION_NO_ALTERNATE_SCREEN in flags. Users tend to have strong opinions regarding the alternate screen, so it's often useful to expose this via a command-line option. When the alternate screen is not used, the contents of the terminal at startup remain visible until obliter- ated, on a cell-by-cell basis (see notcurses_plane(3) for details on clear- ing the screen at startup without using the alternate screen). If the al- ternate screen is not available, the display will still be cleared without NCOPTION_NO_ALTERNATE_SCREEN. Notcurses hides the cursor by default. It can be dynamically enabled, moved, or disabled during execution via notcurses_cursor_enable and notcurses_cursor_disable. It will be hidden while updating the screen. The current location of the terminal cursor can be acquired with notcurses_cursor_yx, whether visible or not. notcurses_init typically emits some diagnostics at startup, including ver- sion information and some details of the configured terminal. This can be inhibited with NCOPTION_SUPPRESS_BANNERS. This will also inhibit the per- formance summary normally printed by notcurses_stop(3). Notcurses can render to a subregion of the terminal by specifying desired margins on all four sides. By default, all margins are zero, and thus ren- dering will be performed on the entirety of the viewing area. This is or- thogonal to use of the alternate screen; using the alternate screen plus margins will see the full screen cleared, followed by rendering to a subre- gion. Inhibiting the alternate screen plus margins will render to a subre- gion, with the screen outside this region not cleared. Margins are best-effort. notcurses_lex_margins provides lexing a margin argument ex- pression in one of two forms: * a single number, which will be applied to all sides, or * four comma-delimited numbers, applied to top, right, bottom, and left. To allow future options without requiring redefinition of the structure, the flags field is only a partially-defined bitfield. Undefined bits should be zero. The following flags are defined: * NCOPTION_INHIBIT_SETLOCALE: Unless this flag is set, notcurses_init will call setlocale(LC_ALL, NULL). If the result is either "C" or "POSIX", it will print a diagnostic to stderr, and then call setlocale(LC_ALL, ""). This will attempt to set the locale based off the LANG environment vari- able. Your program should call setlocale(3) itself, usually as one of the first lines. * NCOPTION_NO_CLEAR_BITMAPS: On entry, make no special attempt to clear any preexisting bitmaps. Note that they might still get cleared even if this is set, and they might not get cleared even if this is not set. * NCOPTION_NO_WINCH_SIGHANDLER: A signal handler will usually be installed for SIGWINCH and SIGCONT, resulting in NCKEY_RESIZE events being gener- ated on input. With this flag, the handler will not be installed. * NCOPTION_NO_QUIT_SIGHANDLERS: A signal handler will usually be installed for SIGABRT, SIGBUS, SIGFPE, SIGILL, SIGINT, SIGQUIT, SIGSEGV, and SIGTERM, cleaning up the terminal on such exceptions. With this flag, the handler will not be installed. * NCOPTION_PRESERVE_CURSOR: The virtual cursor is typically placed at the screen's origin at startup. With this flag, it is instead placed wher- ever the cursor was at program launch. * NCOPTION_SUPPRESS_BANNERS: Disables the diagnostics and version informa- tion printed on startup, and the performance summary on exit. * NCOPTION_NO_ALTERNATE_SCREEN: Do not use the alternate screen (see ter- minfo(5)), even if it is available. * NCOPTION_NO_FONT_CHANGES: Do not touch the font. Notcurses might other- wise attempt to extend the font, especially in the Linux console. * NCOPTION_DRAIN_INPUT: Standard input may be freely discarded. If you do not intend to process input, pass this flag. Otherwise, input can buffer up, and eventually prevent Notcurses from processing messages from the terminal. It will furthermore avoid wasting time processing useless in- put. * NCOPTION_SCROLLING: Enable scrolling on the standard plane. This is equivalent to calling ncplane_set_scrolling(stdn, true) on some standard plane stdn. NCOPTION_CLI_MODE is provided as an alias for the bitwise OR of NCOP- TION_SCROLLING, NCOPTION_NO_ALTERNATE_SCREEN, NCOPTION_PRESERVE_CURSOR, and NCOPTION_NO_CLEAR_BITMAPS. If writing a CLI, it is recommended to use NCOPTION_CLI_MODE rather than explicitly listing these options. notcurses_default_foreground returns the default foreground color, if it could be detected. notcurses_default_background returns the default back- ground color, if it could be detected. Fatal signals It is important to reset the terminal before exiting, whether terminating due to intended operation or a received signal. This is usually accom- plished by explicitly calling notcurses_stop(3) during shutdown. For con- venience, Notcurses by default installs signal handlers for various signals which would typically result in process termination (see signal(7)). These signal handlers call notcurses_stop(3) for each struct notcurses in the process, and then propagate the signal to any previously-configured han- dler. These handlers are disabled upon entry to notcurses_stop(3). To prevent signal handler registration, provide NCOPTION_NO_QUIT_SIGHAN- DLERS. No means is provided to selectively register fatal signal handlers. If this is done, the caller ought be sure to effect similar functionality themselves. Resize events SIGWINCH (SIGnal WINdow CHange) is delivered to the process when the termi- nal is resized. The default action is to ignore it (SIG_IGN). Notcurses installs a handler for this signal. The handler causes Notcurses to update its idea of the terminal's size using TIOCGWINSZ (see ioctl_tty(2)), and generates an NCKEY_RESIZE input event (see notcurses_input(3). This signal handler can be inhibited by setting NCOPTION_NO_WINCH_SIGHANDLER in flags. If this is done, the caller should probably watch for the signal, and in- voke notcurses_refresh(3) or notcurses_render(3) upon its receipt. A resize event does not invalidate any references returned earlier by Notcurses. The content of any new screen area is undefined until the next call to notcurses_render(3). This is true even if an existing struct nc- plane (see notcurses_plane(3)) overlaps the new area, since the signal could arrive while the ncplanes are being modified. Signal handlers are quite restricted as to what actions they can perform, so minimal work is performed in the handler proper. Thus, in the absence of NCOPTION_NO_WINCH_SIGHANDLER, SIGWINCH results in: * interruption of some thread to process the signal * a TIOCGWINSZ ioctl to retrieve the new screen size * queuing of a NCKEY_RESIZE input event (if there is space in the queue) Upon the next call to notcurses_render(3) or notcurses_refresh(3), the standard plane (see notcurses_stdplane(3)) will be resized to the new screen size. The next notcurses_render(3) call will function as expected across the new screen geometry. The hardware cursor Most terminals provide a cursor, a visual indicator of where output will next be placed. There is usually (but not always) some degree of control over what glyph forms this cursor, and whether it e.g. blinks. By default, Notcurses disables this cursor in rendered mode. It can be turned back on with notcurses_enable_cursor, which has immediate effect (there is no need to call notcurses_render(3)). If already visible, this function updates the location. Each time the physical screen is updated, Notcurses will disable the cursor, write the update, move the cursor back to this location, and finally make the cursor visible. notcurses_cursor_yx retrieves the location of the cursor, whether visible or not. notcurses_disable_cursor hides the cursor. You generally shouldn't need to touch the terminal cursor. It's only re- ally relevant with echoed user input, and you don't want echoed user input in rendered mode (instead, read the input, and write it to a plane your- self). A subprocess can be streamed to a plane with an ncsubproc, etc. If the NCOPTION_PRESERVE_CURSOR flag is provided, the cursor's location will be determined at startup, and the standard plane's virtual cursor will be placed to match it (instead of in the upper-left corner). Combined with NCOPTION_NO_ALTERNATE_SCREEN and a scrolling standard plane, this allows rendered mode to be used as a normal scrolling shell application. RETURN VALUES NULL is returned on failure. Otherwise, the return value points at a valid struct notcurses, which can be used until it is provided to notcurses_stop(3). notcurses_cursor_disable returns -1 if the cursor is already invisible. notcurses_default_foreground returns -1 if the default foreground color could not be detected. notcurses_default_background returns -1 if the default background color could not be detected. ENVIRONMENT VARIABLES The NOTCURSES_LOGLEVEL environment variable, if defined, ought be an inte- ger between -1 and 7. These values correspond to NCLOGLEVEL_SILENT through NCLOGLEVEL_TRACE, and override the loglevel field of notcurses_options. The TERM environment variable will be used by setupterm(3ncurses) to select an appropriate terminfo database. NOTES Several command-line options and keybindings are recommended for Notcurses rendered-mode programs: * -l[0-8] ought be mapped to the various NCLOGLEVEL values. Alternatively, map -v to NCLOGLEVEL_WARNING, and map -vv to NCLOGLEVEL_INFO. * -k ought be mapped to NCOPTION_NO_ALTERNATE_SCREEN. * Ctrl+L ought be mapped to notcurses_refresh(3). BUGS The introductory diagnostics are not currently emitted when the alternate screen is used. They ought be printed to the regular screen before enter- ing the alternate screen. They are displayed normally when NCOPTION_NO_AL- TERNATE_SCREEN is used. SEE ALSO fwide(3), getenv(3), setlocale(3), termios(3), notcurses(3), notcurses_in- put(3), notcurses_plane(3), notcurses_refresh(3), notcurses_render(3), notcurses_stop(3), setupterm(3ncurses), terminfo(5), signal(7) AUTHORS nick black nickblack@linux.com v3.0.16 notcurses_init(3)
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | ENVIRONMENT VARIABLES | NOTES | BUGS | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=notcurses_init&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>