OCF_HEARTBEAT_IFACE() OCF_HEARTBEAT_IFACE() NAME ocf_heartbeat_iface-bridge - Manages Bridge network interfaces. SYNOPSIS iface-bridge [start | stop | status | monitor | meta-data | validate-all] DESCRIPTION This resource manages Bridge network interfaces. It can add, remove, con- figure bridges and spanning-tree. SUPPORTED PARAMETERS bridge_name Define the name of the bridge (max 15 charaters). (unique, required, string, no default) bridge_slaves Define the list of interfaces, space separated, to add to the bridge. The list can be empty. (unique, optional, string, no default) bridge_ageing Set the ethernet (MAC) address ageing time in seconds. (optional, integer, no default) port_hairpin Set hairpin forwarding mode. A list of ports that should have hairpin enabled can be specified using the following Example: eth0 eth1 (optional, string, no default) stp Enable or disable Spanning Tree Protocol on the bridge. (optional, boolean, default false) stp_bridgeprio Set the bridge's priority to defined value. The priority value is a number between 0 and 65535), and has no dimension. Lower priority val- ues are preferred. The bridge with the lowest priority will be elected as root bridge. (optional, integer, no default) stp_fd Set the bridge forward delay (in seconds). (optional, integer, default 0) stp_maxage Set the bridge maximum message age (in seconds). (optional, integer, no default) stp_hello Set the bridge hello time (in seconds). (optional, integer, no default) stp_pathcost Set the port cost. This is a dimensionless metric. A list of port/cost can be specified using the following format: unpromoted cost unpromoted cost. Example: eth0 100 eth1 1000 (optional, string, no default) stp_portprio Set the port priority. This is a number between 0 and 63. brctl man page reports a value between 0 and 255, but tests show a limit of 63 on a live system. This metric is used in the designated port and root port selection algorithms. A list of port/priority can be specified using the following format: unpromoted cost unpromoted cost. Example: eth0 10 eth1 60 (optional, string, no default) multicast_router Enable or disable multicast routing on the bridge. (optional, boolean, default 1) multicast_snooping Enable or disable multicast snooping on the bridge. (optional, boolean, default 1) multicast_port_router Enable or disable a port from the multicast router. Kernel enables all port by default. A list of port can be specified using the following format: unpromoted 0|1 unpromoted 0|1. Example: eth0 1 eth1 0 (optional, string, no default) SUPPORTED ACTIONS This resource agent supports the following actions (operations): start Starts the resource. Suggested minimum timeout: 30s. stop Stops the resource. Suggested minimum timeout: 20s. status Performs a status check. Suggested minimum timeout: 20s. Suggested in- terval: 10s. monitor Performs a detailed status check. Suggested minimum timeout: 20s. Sug- gested interval: 10s. meta-data Retrieves resource agent metadata (internal use only). Suggested mini- mum timeout: 5s. validate-all Performs a validation of the resource configuration. Suggested minimum timeout: 20s. EXAMPLE CRM SHELL The following is an example configuration for a iface-bridge resource using the crm(8) shell: primitive p_iface-bridge ocf:heartbeat:iface-bridge \ params \ bridge_name=string \ op monitor timeout="20s" depth="0" interval="10s" EXAMPLE PCS The following is an example configuration for a iface-bridge resource using pcs(8) pcs resource create p_iface-bridge ocf:heartbeat:iface-bridge \ bridge_name=string \ op monitor timeout="20s" OCF_CHECK_LEVEL="0" interval="10s" SEE ALSO http://clusterlabs.org/ AUTHOR ClusterLabs contributors (see the resource agent source for information about individual authors) OCF_HEARTBEAT_IFACE()
NAME | SYNOPSIS | DESCRIPTION | SUPPORTED PARAMETERS | SUPPORTED ACTIONS | EXAMPLE CRM SHELL | EXAMPLE PCS | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ocf_heartbeat_iface-bridge&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>