Skip site navigation (1)Skip section navigation (2)

  
 
  

home | help
OCF_HEARTBEAT_OVSMON(7)        OCF resource agents	 OCF_HEARTBEAT_OVSMON(7)

NAME
     ocf_heartbeat_ovsmonitor - Monitors ovs bonding bonds

SYNOPSIS
     ovsmonitor [start | stop | status | monitor | meta-data | validate-all]

DESCRIPTION
     Monitor the vitality of a local ovs bond.

     You  may set up this RA as a clone resource to monitor the network bonds on
     different nodes, with the same bond name. This is not related to the IP ad-
     dress or the network on which a bond is configured. You may use this RA  to
     move  resources away from a node, which has a faulty bond or prevent moving
     resources to such a node. This gives you independent  control  of	the  re-
     sources, without involving cluster intercommunication. But it requires your
     nodes to have more than one network bond.

     The  resource configuration requires a monitor operation, because the moni-
     tor does the main part of the work. In addition to the resource  configura-
     tion,  you  need to configure some location constraints, based on a CIB at-
     tribute value. The name of the attribute value is configured in the  'name'
     option of this RA.

     Example  constraint  configuration  using crmsh location loc_connected_node
     my_resource_grp rule ="rule_loc_connected_node" -INF:  ovsmonitor-bond-pub-
     lic eq 0

     Example constraint configuration using pcs. Only allow 'my_resource' to run
     on  nodes	where eth0 ethernet device is available. pcs constraint location
     my_resource rule score=-INFINITY ovsmonitor-bond-public ne 1

     The ethmonitor works in 3 different modes to test	the  bond  vitality.  1.
     call  ovs-appctl  to see if at least one of the bonding's link status is up
     (if link is down -> error) 2. call ovs-ofctl and watch the RX  counter  (if
     packages come around in a certain time -> success) 3. return error

SUPPORTED PARAMETERS
     bond
	 The  name of the network bond which should be monitored (e.g. bond-pub-
	 lic).

	 (unique, required, string, no default)

     bridge
	 The name of the ovs bridge that contains the bridge.

	 (unique, required, string, no default)

     name
	 The name of the CIB attribute to set. This is the name to  be	used  in
	 the constraints. Defaults to "ovsmonitor-'bond_name'".

	 (unique, optional, string, no default)

     multiplier
	 Multiplier  for  the value of the CIB attriobute specified in parameter
	 name.

	 (optional, integer, default 1)

     repeat_count
	 Specify how often the bond will be monitored, before the status is  set
	 to  failed.  You need to set the timeout of the monitoring operation to
	 at least repeat_count * repeat_interval

	 (optional, integer, default 5)

     repeat_interval
	 Specify how long to wait in seconds between the repeat_counts.

	 (optional, integer, default 10)

     pktcnt_timeout
	 Timeout for the RX packet counter. Stop listening  for  packet  counter
	 changes after the given number of seconds.

	 (optional, integer, default 5)

     link_status_only
	 Only report success based on link status. Do not perform RX counter re-
	 lated connectivity tests.

	 (optional, boolean, default false)

SUPPORTED ACTIONS
     This resource agent supports the following actions (operations):

     start
	 Starts the resource. Suggested minimum timeout: 60s.

     stop
	 Stops the resource. Suggested minimum timeout: 20s.

     status
	 Performs  a status check. Suggested minimum timeout: 60s. Suggested in-
	 terval: 10s.

     monitor
	 Performs a detailed status check. Suggested minimum timeout: 60s.  Sug-
	 gested interval: 10s.

     meta-data
	 Retrieves  resource agent metadata (internal use only). Suggested mini-
	 mum timeout: 5s.

     validate-all
	 Performs a validation of the resource configuration. Suggested  minimum
	 timeout: 20s.

EXAMPLE CRM SHELL
     The  following  is an example configuration for a ovsmonitor resource using
     the crm(8) shell:

	 primitive p_ovsmonitor ocf:heartbeat:ovsmonitor \
	   params \
	     bond=string \
	     bridge=string \
	   op monitor depth="0" timeout="60s" interval="10s"

EXAMPLE PCS
     The following is an example configuration for a ovsmonitor  resource  using
     pcs(8)

	 pcs resource create p_ovsmonitor ocf:heartbeat:ovsmonitor \
	   bond=string \
	   bridge=string \
	   op monitor OCF_CHECK_LEVEL="0" timeout="60s" interval="10s"

SEE ALSO
     http://clusterlabs.org/

AUTHOR
     ClusterLabs  contributors	(see  the  resource agent source for information
     about individual authors)

resource-agents 4.13.0		   08/27/2026		 OCF_HEARTBEAT_OVSMON(7)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ocf_heartbeat_ovsmonitor&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>

home | help