FreeBSD Manual Pages
ocsptool(1) User Commands ocsptool(1) NAME ocsptool - GnuTLS OCSP tool SYNOPSIS ocsptool [-flags] [-flag [value]] [--option-name[[=| ]value]] All arguments must be options. DESCRIPTION On verification Responses are typically signed/issued by designated certificates or cer- tificate authorities and thus this tool requires on verification the cer- tificate of the issuer or the full certificate chain in order to determine the appropriate signing authority. The specified certificate of the issuer is assumed trusted. OPTIONS -d num, --debug=num Enable debugging. This option takes an integer number as its argument. The value of num is constrained to being: in the range 0 through 9999 Specifies the debug level. -V, --verbose More verbose output. --infile=file Input file. --outfile=str Output file. --ask=server name|url Ask an OCSP/HTTP server on a certificate validity. Connects to the specified HTTP OCSP server and queries on the validity of the loaded certificate. Its argument can be a URL or a plain server name. It can be combined with --load-chain, where it checks all certificates in the provided chain, or with --load-cert and --load-issuer options. The lat- ter checks the provided certificate against its specified issuer certifi- cate. -e, --verify-response Verify response. Verifies the provided OCSP response against the system trust anchors (un- less --load-trust is provided). It requires the --load-signer or --load-chain options to obtain the signer of the OCSP response. -i, --request-info Print information on a OCSP request. Display detailed information on the provided OCSP request. -j, --response-info Print information on a OCSP response. Display detailed information on the provided OCSP response. -q, --generate-request Generates an OCSP request. --nonce, --no-nonce Use (or not) a nonce to OCSP request. The no-nonce form will disable the option. --load-chain=file Reads a set of certificates forming a chain from file. --load-issuer=file Reads issuer's certificate from file. --load-cert=file Reads the certificate to check from file. --load-trust=file Read OCSP trust anchors from file. This option must not appear in combination with any of the following options: load-signer. When verifying an OCSP response read the trust anchors from the provided file. When this is not provided, the system's trust anchors will be used. --load-signer=file Reads the OCSP response signer from file. This option must not appear in combination with any of the following options: load- trust. --inder, --no-inder Use DER format for input certificates and private keys. The no-inder form will disable the option. --outder Use DER format for output of responses (this is the default). The output will be in DER encoded format. Unlike other GnuTLS tools, this is the default for this tool --outpem Use PEM format for output of responses. The output will be in PEM format. -Q file, --load-request=file Reads the DER encoded OCSP request from file. -S file, --load-response=file Reads the DER encoded OCSP response from file. --ignore-errors Ignore any verification errors. --verify-allow-broken Allow broken algorithms, such as MD5 for verifica- tion. This can be combined with --verify-response. --attime=timestamp Perform validation at the timestamp instead of the sys- tem time. timestamp is an instance in time encoded as Unix time or in a human readable timestring such as "29 Feb 2004", "2004-02-29". Full documenta- tion available at <https://www.gnu.org/software/coreutils/man- ual/html_node/Date-input-formats.html> or locally via info '(coreutils) date invocation'. -v arg, --version=arg Output version of program and exit. The default mode is `v', a simple version. The `c' mode will print copyright information and `n' will print the full copyright notice. -h, --help Display usage information and exit. -!, --more-help Pass the extended usage information through a pager. EXAMPLES Print information about an OCSP request To parse an OCSP request and print information about the content, the -i or --request-info parameter may be used as follows. The -Q parameter specify the name of the file containing the OCSP request, and it should contain the OCSP request in binary DER format. $ ocsptool -i -Q ocsp-request.der The input file may also be sent to standard input like this: $ cat ocsp-request.der | ocsptool --request-info Print information about an OCSP response Similar to parsing OCSP requests, OCSP responses can be parsed using the -j or --response-info as follows. $ ocsptool -j -Q ocsp-response.der $ cat ocsp-response.der | ocsptool --response-info Generate an OCSP request The -q or --generate-request parameters are used to generate an OCSP request. By default the OCSP request is written to standard output in binary DER format, but can be stored in a file using --outfile. To generate an OCSP request the issuer of the certificate to check needs to be specified with --load-issuer and the certificate to check with --load-cert. By default PEM format is used for these files, although --inder can be used to specify that the input files are in DER format. $ ocsptool -q --load-issuer issuer.pem --load-cert client.pem --outfile ocsp-request.der When generating OCSP requests, the tool will add an OCSP extension containing a nonce. This behaviour can be disabled by specifying --no-nonce. Verify signature in OCSP response To verify the signature in an OCSP response the -e or --verify-re- sponse parameter is used. The tool will read an OCSP response in DER format from standard input, or from the file specified by --load-response. The OCSP response is verified against a set of trust anchors, which are specified using --load-trust. The trust anchors are concatenated certificates in PEM format. The certifi- cate that signed the OCSP response needs to be in the set of trust anchors, or the issuer of the signer certificate needs to be in the set of trust anchors and the OCSP Extended Key Usage bit has to be asserted in the signer certificate. $ ocsptool -e --load-trust issuer.pem --load-response ocsp-response.der The tool will print status of verification. Verify signature in OCSP response against given certificate It is possible to override the normal trust logic if you know that a certain certificate is supposed to have signed the OCSP response, and you want to use it to check the signature. This is achieved us- ing --load-signer instead of --load-trust. This will load one cer- tificate and it will be used to verify the signature in the OCSP re- sponse. It will not check the Extended Key Usage bit. $ ocsptool -e --load-signer ocsp-signer.pem --load-response ocsp-response.der This approach is normally only relevant in two situations. The first is when the OCSP response does not contain a copy of the signer certificate, so the --load-trust code would fail. The second is if you want to avoid the indirect mode where the OCSP response signer certificate is signed by a trust anchor. Real-world example Here is an example of how to generate an OCSP request for a certifi- cate and to verify the response. For illustration we'll use the blog.josefsson.org host, which (as of writing) uses a certificate from CACert. First we'll use gnutls-cli to get a copy of the server certificate chain. The server is not required to send this informa- tion, but this particular one is configured to do so. $ echo | gnutls-cli -p 443 blog.josefsson.org --save-cert chain.pem The saved certificates normally contain a pointer to where the OCSP responder is located, in the Authority Information Access Informa- tion extension. For example, from certtool -i < chain.pem there is this information: Authority Information Access Information (not critical): Access Method: 1.3.6.1.5.5.7.48.1 (id-ad-ocsp) Access Location URI: https://ocsp.CAcert.org/ This means that ocsptool can discover the servers to contact over HTTP. We can now request information on the chain certificates. $ ocsptool --ask --load-chain chain.pem The request is sent via HTTP to the OCSP server address found in the certificates. It is possible to override the address of the OCSP server as well as ask information on a particular certificate using --load-cert and --load-issuer. $ ocsptool --ask https://ocsp.CAcert.org/ --load-chain chain.pem EXIT STATUS One of the following exit values will be returned: 0 (EXIT_SUCCESS) Successful program execution. 1 (EXIT_FAILURE) The operation failed or the command syntax was not valid. SEE ALSO certtool (1) AUTHORS COPYRIGHT Copyright (C) 2020-2023 Free Software Foundation, and others all rights reserved. This program is released under the terms of the GNU General Public License, version 3 or later BUGS Please send bug reports to: bugs@gnutls.org 3.8.13 29 Apr 2026 ocsptool(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | AUTHORS | COPYRIGHT | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ocsptool&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>