FreeBSD Manual Pages
OMAKE(1) General Commands Manual OMAKE(1) NAME omake, osh - make-like build utility and its shell SYNOPSIS omake [OPTION...] [TARGET...] osh [OPTION...] DESCRIPTION OMake constructs projects in a way similar to make(1) in particular GNU- Make. When OMake needs to spawn a shell it uses its own shell, Osh. The shell can also be used standalone either as omake --shell or as osh(1) if the appropriate link has been installed. OMake OMake is designed for building projects that have source files in several directories. Projects are normally specified using an OMakefile in each of the project directories, and an OMakeroot file in the root directory of the project. The OMakeroot file specifies general build rules, and the OMake- files specify the build parameters specific to each of the subdirectories. When OMake runs, it walks the configuration tree, evaluating rules from all of the OMakefiles. The project is then built from the entire collection of build rules. Osh OMake also includes the standalone command-line interpreter osh that can be used as an interactive shell. This shell uses the same syntax, and pro- vides the same features on all platforms that OMake supports, including Win32. See also the OMake Manual, chapters 11, "Shell commands" and 15, "The Osh shell". OPTIONS The options are presented in functionally related sections. Within these the options are sorted alphabetically in case-insensitive order. Options marked with `<N>' can be negated by prefixing them with `--no' as, e.g., --no-S or --no--print-status. Note the conserved inner double dash of the latter, though. Build Control --absname Enforce that filenames always expand to their absolute path- names. <N> Note: This is an experimental option. It may become deprecated. --all-dependencies If the options --print-dependencies or --show-dependencies are given print transitive dependencies. This means that all depen- dencies will be printed recursively. Otherwise no effect. <N> --configure Recompute static. sections of the included omake files, instead of trusting the cached results. <N> --depend Do not trust the cached dependency information. This will force files to be rescanned for dependency information. <N> --flush-includes Do not trust cached *.omc files. <N> -j JOB-SPEC JOB-SPEC is either the maximum number of jobs to run in paral- lel. Or, JOB-SPEC specifies servers for remote execution of commands in the form of a colon separated list of SERVER-NAME=NUMBER-OF- JOBS pairs. For example, the option -j 2:small.host.org=1:large.host.org=4 would specify that up to 2 jobs can be executed locally, 1 on the server small.host.org and 4 on large.host.org. Each remote server must use the same filesystem location for the project. Remote execution is currently an experimental feature. Remote filesystems like NFS do not provide adequate file consistency for this to work. -k Do not stop when an error occurs; continue to build as much of the project as possible. This option is implied by -p and -P. <N> Mnemonic: "keep on making". -n Print commands, but do not execute them. <N> Mnemonic: "no operation". -P Keep on polling the filesystem for changes "forever"; implies -k and -p. <N> -p Watch the filesystem for changes, and continue the build until it succeeds. If this option is specified, OMake will restart the build whenever source files are modified. This option im- plies -k. <N> Mnemonic: "poll filesystem". --print-dependencies Collect and print dependency information for the TARGETs on the command line. <N> --project Ignore the current directory and build the project. <N> -R Ignore the current directory and build the project from its root directory. When OMake is run in a subdirectory of a project and no explicit targets are given on the command line, it would nor- mally only build files within the current directory and its sub- directories. More precisely: it builds all the .DEFAULT targets in the current directory and its subdirectories. If the -R op- tion is specified, the build is performed as if OMake were run in the project root. In other words, with the -R option all the relative targets specified on the command line will be taken relative to the project root instead of relative to the current directory. When no targets are given on the command line, all the .DEFAULT tar- gets in the project will be built regardless of the current di- rectory. <N> Mnemonic: "root build". --show-dependencies TARGET Show dependencies (only) if TARGET is built. -t Update the OMake database to force all target files of the project are considered up-to-date. <N> -U Do not trust the dependency cache or cached OMakefiles. This will force the entire project to be rebuilt. <N> --verbose-dependencies If either one of the options --print-dependencies or --show-de- pendencies is in effect, print transitive dependencies. That is, print all dependencies recursively. If neither of the above options is specified, this option has no effect. <N> -warn-error Treat warnings as errors. <N> -Wdeclare Warn about undeclared variables. <N> Output -o SHORT-OPTION... Short output options alias the functionality of some options or combinations thereof. In general, an uppercase character turns the option on, whereas a lowercase character turns the option off. SHORT-OPTION is one of following letters. 0 Equivalent to -s --output-only-errors --no-progress This option specifies that omake should be as quiet as pos- sible. If any errors occur during the build, the output is delayed until the build terminates. Output from successful commands is discarded. 1 Equivalent to -S --progress --output-only-errors This is a slightly more relaxed version of "quiet" output. The output from successful commands is discarded. The out- put from failed commands is printed immediately after the command complete. The output from failed commands is dis- played twice: once immediately after the command completes, and again when the build completes. A progress bar is dis- played so that you know when the build is active. Include the -p option if you want to turn off the progress bar (for example omake -o 1p). 2 Equivalent to --progress --output-postpone The is even more relaxed, output from successful commands is printed. This is often useful for deinterleaving the output when using option -j. P (uppercase) Equivalent to --progress. p (lowercase) Equivalent to --no--progress. S (uppercase) Equivalent to -S. s (lowercase) Equivalent to --no-S. W (uppercase) Equivalent to -w. w (lowercase) Equivalent to --no-w. X (uppercase) Equivalent to --print-exit. x (lowercase) Equivalent to --no-print-exit. --output-at-end The output of the failed commands will be printed after OMake has finished. Off by default, unless -k is enabled (directly or via -p/-P). <N> --output-normal Relay the output of the rule commands to the OMake output right away. This is the default when no --output-postpone and no --output-only-errors flags are given. <N> --output-only-errors Same as --output-postpone, but postponed output will only be printed for commands that fail. This can be useful in reducing unwanted output so that the user can concentrate on any errors. <N> --output-postpone Postpone printing command output until a rule terminates. Then print it as a single block. This is useful in combination with the -j option, where the out- put of multiple subprocesses can be garbled. The diversion is printed as a single coherent unit. <N> --print-exit Print the exit codes of all commands that have been run. <N> --print-status Print status lines (starting with `+' or `-'). This is the de- fault setting. <N> --progress Print a progress indicator; enabled by default if stdout is a terminal and disabled if the output has been redirected. <N> -S Do not print commands as they are executed unless they produce any output or they fail. This is the default. <N> -s Never print commands before they are executed. <N> Mnemonic: "silent". --verbose Switch on very verbose output. This option is equivalent to --no-S --print-status --print-exit VERBOSE=true -w Print the directory in "make format" as commands are executed. This is mainly useful for editors that expect make-style direc- tory information for determining the location of errors. <N> Cache Management --force-dotomake Always use the directory $HOME/.omake for *.omc-cache files. <N> --dotomake DIRECTORY Use the specified DIRECTORY in place of $HOME/.omake for the storage of *.omc-files. --save-interval DURATION Save the build DB (.omakedb) every DURATION seconds (0 disables, default: 60). Shell Related -c COMMAND Execute COMMAND. -i Treat the session as interactive. <N> --shell Run the OMake shell: osh. <N> Debugging -allow-exceptions Do not catch top-level exceptions. This option is useful if running with OCAMLRUNPARAM=b. <N> -debug-active-rules Debug active rules. <N> -debug-ast-lex Print tokens as they are scanned. <N> -debug-build Display debugging information during the build. <N> -debug-cache Display cache debugging information. <N> -debug-db Debug the file database. <N> -debug-deps Display dependency information as scanned. <N> -debug-eval Debug the evaluator. <N> -debug-exec Display execution debugging information. <N> -debug-hash Show Lm_hash statistics. <N> -debug-implicit Display debugging information for implicit rule selection. <N> -debug-lex Debug the lexer. <N> -debug-lexgen Debug the lexer generator. <N> -debug-notify Debug the FAM (-p filesystem watch) operations. <N> -debug-parse Debug the parser. <N> -debug-parsegen Debug the parser generator. <N> -debug-parsing Debug OMake parsing operations. <N> -debug-pos Print source position information on error. <N> -debug-remote Debug remote execution. <N> -debug-rule Display debugging information about rule execution. <N> -debug-scanner Display debugging information for scanner selection. <N> -debug-shell Debug shell operations. <N> -debug-thread Show thread operations. <N> -extended-rusage Print more about resource usage. <N> -instrument Do instrument functions. <N> -print-ast Print the AST after parsing. <N> -print-files Print the files as they are read. <N> -print-ir Print the IR. <N> -print-loc Also print locations. <N> -trace-pos Trace the program execution. <N> -print-rules Print the rules after evaluation. <N> Miscellaneous --install Install default files OMakefile and OMakeroot of an OMake project into the current directory. This is typically done only once to start an OMake project in the current directory. <N> --install-all In addition to installing the default files OMakefile and OMake- root of an OMake project into the current directory install de- fault OMakefiles into each subdirectory of the current direc- tory. cvs(1) rules are used for filtering the subdirectory list. For example, OMakefiles are not copied into directories called CVS, RCCS, etc. <N> --install-force Normally, OMake will prompt before it overwrites any existing OMakefile. If this option is given, all files are overwritten without prompting; implies --install. <N> --help Display help message and exit. --help-all Display help message for all options and exit. --help-debug Display help message just for the debugging-related options and exit. --server SERVER-NAME Run as a remote server called SERVER-NAME. --version Print the version string and the default library directory then exit. EXIT STATUS 0 No problems; everything went well. 1 Build failure caused by a program with non-zero exit code. 2 Not a build-related error, for example a syntax error in one of the files that constitute the OMake project. 3 Bogus command-line option. ENVIRONMENT OMAKEFLAGS If defined, OMAKEFLAGS should contain a set of options exactly as they are specified on the command line. OMAKELIB If defined, OMAKELIB refers to the installed location of the OMake standard library. This is the directory that contains Pervasives.om etc. On a Unix system, this is often /usr/lib/omake or /usr/lo- cal/lib/omake, and on Win32 systems it is often c:\Pro- gram Files\OMake\lib. If not defined, OMake uses the default configured location, which can be inquired with option --version. Normally, this variable should not be set. FILES OMakeroot This file is required; it serves to identify the project root, and it contains code that sets up the project. OMakefile Any project-specific configuration lives in the OMakefiles. .om Conventional filename extension for OMake "library" files. .omc For performance OMake compiles all OMake-source files on the fly. Compiled OMake files receive extension .omc. EXAMPLES OMake * This is an almost minimal OMakeroot file. ## Setup for building a C- or C++-project. open build/C ## Define according our configuration. DefineCommandVars() ## Include the OMakefile in this directory. .SUBDIRS: . * Small OMakefile file to build the famous "Hello, world!" example. ## Define target-source relationship of a C-program. CProgram(hello, hello) # we can be extension agnostic ## Define the default (and only) target. .DEFAULT: hello$(EXE) Osh * Call date(1) with some options via OMake. $ omake --shell -c 'date --universal --iso-8601=seconds' 2021-11-20T14:52:10+00:00 * Call update(1) via Osh. $ osh -c uptime 15:54:03 up 6:41, 1 user, load average: 0.02, 0.04, 0.11 * Interactive use. $ osh % uname --kernel-release --kernel-version 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) % ^D $ SEE ALSO make(1), sh(1). 2021-11-17 OMAKE(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | ENVIRONMENT | FILES | EXAMPLES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=osh&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>