Local_Config(5) Open vSwitch Manual Local_Config(5) NAME Local_Config - Local_Config database schema This database is for local configuration of an ovsdb-server. The database is meant to be unique, even among multiple clustered db servers, so that configuration that is local to that server can be configured separately (e.g. Connection information). TABLE SUMMARY The following list summarizes the purpose of each of the tables in the Lo- cal_Config database. Each table is described in more detail on a later page. Table Purpose Config ovsdb-server configuration Connection OVSDB client connections. Config TABLE The root local configuration table for an ovsdb-server. This table must have exactly one row. Summary: Connection Options: connections set of Connections Details: Connection Options: connections: set of Connections Database clients to which the Open vSwitch database server should connect or on which it should listen, along with options for how these connections should be configured. See the Connection table for more information. Connection TABLE Configuration for a database connection to an Open vSwitch database (OVSDB) client. This table primarily configures the Open vSwitch database server (ovsdb-server). The Open vSwitch database server can initiate and maintain active connec- tions to remote clients. It can also listen for database connections. Summary: Core Features: target string (must be unique within table) read_only boolean role string Client Failure Detection and Handling: max_backoff optional integer, at least 1,000 inactivity_probe optional integer Status: is_connected boolean status : last_error optional string status : state optional string, one of ACTIVE, BACKOFF, CON- NECTING, IDLE, or VOID status : sec_since_connect optional string, containing an integer, at least 0 status : sec_since_disconnect optional string, containing an integer, at least 0 status : locks_held optional string status : locks_waiting optional string status : locks_lost optional string status : n_connections optional string, containing an integer, at least 2 status : bound_port optional string, containing an integer Connection Parameters: other_config : dscp optional string, containing an integer Configuration: external_ids map of string-string pairs Details: Core Features: target: string (must be unique within table) Connection methods for clients. The following connection methods are currently supported: ssl:host[:port] The specified SSL port on the host at the given host, which can either be a DNS name (if built with unbound library) or an IP address. A valid SSL configuration must be provided when this form is used, this configuration can be specified via command-line options or the SSL table. If port is not specified, it defaults to 6640. SSL support is an optional feature that is not always built as part of Open vSwitch. tcp:host[:port] The specified TCP port on the host at the given host, which can either be a DNS name (if built with unbound library) or an IP address. If host is an IPv6 address, wrap it in square brackets, e.g. tcp:[::1]:6640. If port is not specified, it defaults to 6640. pssl:[port][:host] Listens for SSL connections on the specified TCP port. Spec- ify 0 for port to have the kernel automatically choose an available port. If host, which can either be a DNS name (if built with unbound library) or an IP address, is specified, then connections are restricted to the resolved or specified local IPaddress (either IPv4 or IPv6 address). If host is an IPv6 address, wrap in square brackets, e.g. pssl:6640:[::1]. If host is not specified then it listens only on IPv4 (but not IPv6) addresses. A valid SSL configuration must be pro- vided when this form is used, this can be specified either via command-line options or the SSL table. If port is not specified, it defaults to 6640. SSL support is an optional feature that is not always built as part of Open vSwitch. ptcp:[port][:host] Listens for connections on the specified TCP port. Specify 0 for port to have the kernel automatically choose an available port. If host, which can either be a DNS name (if built with unbound library) or an IP address, is specified, then connec- tions are restricted to the resolved or specified local IP address (either IPv4 or IPv6 address). If host is an IPv6 ad- dress, wrap it in square brackets, e.g. ptcp:6640:[::1]. If host is not specified then it listens only on IPv4 addresses. If port is not specified, it defaults to 6640. When multiple clients are configured, the target values must be unique. Duplicate target values yield unspecified results. read_only: boolean true to restrict these connections to read-only transactions, false to allow them to modify the database. role: string String containing role name for this connection entry. Client Failure Detection and Handling: max_backoff: optional integer, at least 1,000 Maximum number of milliseconds to wait between connection attempts. Default is implementation-specific. inactivity_probe: optional integer Maximum number of milliseconds of idle time on connection to the client before sending an inactivity probe message. If Open vSwitch does not communicate with the client for the specified number of seconds, it will send a probe. If a response is not received for the same additional amount of time, Open vSwitch assumes the connection has been broken and attempts to reconnect. Default is implementa- tion-specific. A value of 0 disables inactivity probes. Status: Key-value pair of is_connected is always updated. Other key-value pairs in the status columns may be updated depends on the target type. When target specifies a connection method that listens for inbound connec- tions (e.g. ptcp: or punix:), both n_connections and is_connected may also be updated while the remaining key-value pairs are omitted. On the other hand, when target specifies an outbound connection, all key- value pairs may be updated, except the above-mentioned two key-value pairs associated with inbound connection targets. They are omitted. is_connected: boolean true if currently connected to this client, false otherwise. status : last_error: optional string A human-readable description of the last error on the connection to the manager; i.e. strerror(errno). This key will exist only if an error has occurred. status : state: optional string, one of ACTIVE, BACKOFF, CONNECTING, IDLE, or VOID The state of the connection to the manager: VOID Connection is disabled. BACKOFF Attempting to reconnect at an increasing period. CONNECTING Attempting to connect. ACTIVE Connected, remote host responsive. IDLE Connection is idle. Waiting for response to keep-alive. These values may change in the future. They are provided only for human consumption. status : sec_since_connect: optional string, containing an integer, at least 0 The amount of time since this client last successfully connected to the database (in seconds). Value is empty if client has never suc- cessfully been connected. status : sec_since_disconnect: optional string, containing an integer, at least 0 The amount of time since this client last disconnected from the database (in seconds). Value is empty if client has never discon- nected. status : locks_held: optional string Space-separated list of the names of OVSDB locks that the connection holds. Omitted if the connection does not hold any locks. status : locks_waiting: optional string Space-separated list of the names of OVSDB locks that the connection is currently waiting to acquire. Omitted if the connection is not waiting for any locks. status : locks_lost: optional string Space-separated list of the names of OVSDB locks that the connection has had stolen by another OVSDB client. Omitted if no locks have been stolen from this connection. status : n_connections: optional string, containing an integer, at least 2 When target specifies a connection method that listens for inbound connections (e.g. ptcp: or pssl:) and more than one connection is actually active, the value is the number of active connections. Oth- erwise, this key-value pair is omitted. status : bound_port: optional string, containing an integer When target is ptcp: or pssl:, this is the TCP port on which the OVSDB server is listening. (This is particularly useful when target specifies a port of 0, allowing the kernel to choose any available port.) Connection Parameters: other_config : dscp: optional string, containing an integer The Differentiated Service Code Point (DSCP) is specified using 6 bits in the Type of Service (TOS) field in the IP header. DSCP pro- vides a mechanism to classify the network traffic and provide Qual- ity of Service (QoS) on IP networks. The DSCP value specified here is used when establishing the connection between the manager and the Open vSwitch. If no value is specified, a default value of 48 is chosen. Valid DSCP values must be in the range 0 to 63. Configuration: External configuration options external_ids: map of string-string pairs External client-defined key-value pairs Open vSwitch 2.17.12 DB Schema 1.0.0 Local_Config(5)
NAME | TABLE SUMMARY | Config TABLE | Connection TABLE
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ovsdb.local-config&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>