FreeBSD Manual Pages
PARALLEL_DESIGN(7) parallel PARALLEL_DESIGN(7) Design of GNU Parallel This document describes design decisions made in the development of GNU parallel and the reasoning behind them. It will give an overview of why some of the code looks the way it does, and will help new maintainers un- derstand the code better. One file program GNU parallel is a Perl script in a single file. It is object oriented, but contrary to normal Perl scripts each class is not in its own file. This is due to user experience: The goal is that in a pinch the user will be able to get GNU parallel working simply by copying a single file: No need to mess around with environment variables like PERL5LIB. Choice of programming language GNU parallel is designed to be able to run on old systems. That means that it cannot depend on a compiler being installed - and especially not a com- piler for a language that is younger than 20 years old. The goal is that you can use GNU parallel on any system, even if you are not allowed to install additional software. Of all the systems I have experienced, I have yet to see a system that had GCC installed that did not have Perl. The same goes for Rust, Go, Haskell, and other younger languages. I have, however, seen systems with Perl with- out any of the mentioned compilers. Most modern systems also have either Python2 or Python3 installed, but you still cannot be certain which version, and since Python2 cannot run under Python3, Python is not an option. Perl has the added benefit that implementing the {= perlexpr =} replacement string was fairly easy. The primary drawback is that Perl is slow. So there is an overhead of 3-10 ms/job and 1 ms/MB output (and even more if you use --tag). Old Perl style GNU parallel uses some old, deprecated constructs. This is due to a goal of being able to run on old installations. Currently the target is CentOS 3.9 and Perl 5.8.0. Scalability up and down The smallest system GNU parallel is tested on is a 32 MB ASUS WL500gP. The largest is a 2 TB 128-core machine. It scales up to around 100 machines - depending on the duration of each job. Exponentially back off GNU parallel busy waits. This is because the reason why a job is not started may be due to load average (when using --load), and thus it will not make sense to just wait for a job to finish. Instead the load average must be rechecked regularly. Load average is not the only reason: --timeout has a similar problem. To not burn up too much CPU GNU parallel sleeps exponentially longer and longer if nothing happens, maxing out at 1 second. Shell compatibility It is a goal to have GNU parallel work equally well in any shell. However, in practice GNU parallel is being developed in bash and thus testing in other shells is limited to reported bugs. When an incompatibility is found there is often not an easy fix: Fixing the problem in csh often breaks it in bash. In these cases the fix is often to use a small Perl script and call that. env_parallel env_parallel is a dummy shell script that will run if env_parallel is not an alias or a function and tell the user how to activate the alias/function for the supported shells. The alias or function will copy the current environment and run the command with GNU parallel in the copy of the environment. The problem is that you cannot access all of the current environment inside Perl. E.g. aliases, functions and unexported shell variables. The idea is therefore to take the environment and put it in $PARALLEL_ENV which GNU parallel prepends to every command. The only way to have access to the environment is directly from the shell, so the program must be written in a shell script that will be sourced and there has to deal with the dialect of the relevant shell. env_parallel.* These are the files that implements the alias or function env_parallel for a given shell. It could be argued that these should be put in some obscure place under /usr/lib, but by putting them in your path it becomes trivial to find the path to them and source them: source `which env_parallel.foo` The beauty is that they can be put anywhere in the path without the user having to know the location. So if the user's path includes /afs/bin/i386_fc5 or /usr/pkg/parallel/bin or /usr/local/paral- lel/20161222/sunos5.6/bin the files can be put in the dir that makes most sense for the sysadmin. env_parallel.bash / env_parallel.sh / env_parallel.ash / env_parallel.dash / env_parallel.zsh / env_parallel.ksh / env_parallel.mksh env_parallel.(bash|sh|ash|dash|ksh|mksh|zsh) defines the function env_par- allel. It uses alias and typeset to dump the configuration (with a few ex- ceptions) into $PARALLEL_ENV before running GNU parallel. After GNU parallel is finished, $PARALLEL_ENV is deleted. env_parallel.csh env_parallel.csh has two purposes: If env_parallel is not an alias: make it into an alias that sets $PARALLEL with arguments and calls env_paral- lel.csh. If env_parallel is an alias, then env_parallel.csh uses $PARALLEL as the arguments for GNU parallel. It exports the environment by writing a variable definition to a file for each variable. The definitions of aliases are appended to this file. Fi- nally the file is put into $PARALLEL_ENV. GNU parallel is then run and $PARALLEL_ENV is deleted. env_parallel.fish First all functions definitions are generated using a loop and functions. Dumping the scalar variable definitions is harder. fish can represent non-printable characters in (at least) 2 ways. To avoid problems all scalars are converted to \XX quoting. Then commands to generate the definitions are made and separated by NUL. This is then piped into a Perl script that quotes all values. List elements will be appended using two spaces. Finally \n is converted into \1 because fish variables cannot contain \n. GNU parallel will later convert all \1 from $PARALLEL_ENV into \n. This is then all saved in $PARALLEL_ENV. GNU parallel is called, and $PARALLEL_ENV is deleted. parset (supported in sh, ash, dash, bash, zsh, ksh, mksh) parset is a shell function. This is the reason why parset can set vari- ables: It runs in the shell which is calling it. It is also the reason why parset does not work, when data is piped into it: ... | parset ... makes parset start in a subshell, and any changes in envi- ronment can therefore not make it back to the calling shell. Job slots The easiest way to explain what GNU parallel does is to assume that there are a number of job slots, and when a slot becomes available a job from the queue will be run in that slot. But originally GNU parallel did not model job slots in the code. Job slots have been added to make it possible to use {%} as a replacement string. While the job sequence number can be computed in advance, the job slot can only be computed the moment a slot becomes available. So it has been imple- mented as a stack with lazy evaluation: Draw one from an empty stack and the stack is extended by one. When a job is done, push the available job slot back on the stack. This implementation also means that if you re-run the same jobs, you cannot assume jobs will get the same slots. And if you use remote executions, you cannot assume that a given job slot will remain on the same remote server. This goes double since number of job slots can be adjusted on the fly (by giving --jobs a file name). Rsync protocol version rsync 3.1.x uses protocol 31 which is unsupported by version 2.5.7. That means that you cannot push a file to a remote system using rsync protocol 31, if the remote system uses 2.5.7. rsync does not automatically downgrade to protocol 30. GNU parallel does not require protocol 31, so if the rsync version is >= 3.1.0 then --protocol 30 is added to force newer rsyncs to talk to version 2.5.7. Compression GNU parallel buffers output in temporary files. --compress compresses the buffered data. This is a bit tricky because there should be no files to clean up if GNU parallel is killed by a power outage. GNU parallel first selects a compression program. If the user has not se- lected one, the first of these that is in $PATH is used: pzstd lbzip2 pbzip2 zstd pixz lz4 pigz lzop plzip lzip gzip lrz pxz bzip2 lzma xz clzip. They are sorted by speed on a 128 core machine. Schematically the setup is as follows: command started by parallel | compress > tmpfile cattail tmpfile | uncompress | parallel which reads the output The setup is duplicated for both standard output (stdout) and standard er- ror (stderr). GNU parallel pipes output from the command run into the compression program which saves to a tmpfile. GNU parallel records the pid of the compress pro- gram. At the same time a small Perl script (called cattail above) is started: It basically does cat followed by tail -f, but it also removes the tmpfile as soon as the first byte is read, and it continuously checks if the pid of the compression program is dead. If the compress program is dead, cattail reads the rest of tmpfile and exits. As most compression programs write out a header when they start, the tmp- file in practice is removed by cattail after around 40 ms. More detailed it works like this: bash ( command ) | sh ( emptywrapper ( bash ( compound compress ) ) >tmpfile ) cattail ( rm tmpfile; compound decompress ) < tmpfile This complex setup is to make sure compress program is only started if there is input. This means each job will cause 8 processes to run. If com- bined with --keep-order these processes will run until the job has been printed. Wrapping The command given by the user can be wrapped in multiple templates. Tem- plates can be wrapped in other templates. $COMMAND the command to run. $INPUT the input to run. $SHELL the shell that started GNU Parallel. $SSHLOGIN the sshlogin. $WORKDIR the working dir. $FILE the file to read parts from. $STARTPOS the first byte position to read from $FILE. $LENGTH the number of bytes to read from $FILE. --shellquote echo Double quoted $INPUT --nice pri Remote: See The remote system wrapper. Local: setpriority(0,0,$nice) --cat cat > {}; $COMMAND {}; perl -e '$bash = shift; $csh = shift; for(@ARGV) { unlink;rmdir; } if($bash =~ s/h//) { exit $bash; } exit $csh;' "$?h" "$status" {}; {} is set to $PARALLEL_TMP which is a tmpfile. The Perl script saves the exit value, unlinks the tmpfile, and re- turns the exit value - no matter if the shell is bash/ksh/zsh (using $?) or *csh/fish (using $status). --fifo perl -e '($s,$c,$f) = @ARGV; # mkfifo $PARALLEL_TMP system "mkfifo", $f; # spawn $shell -c $command & $pid = fork || exec $s, "-c", $c; open($o,">",$f) || die $!; # cat > $PARALLEL_TMP while(sysread(STDIN,$buf,131072)){ syswrite $o, $buf; } close $o; # waitpid to get the exit code from $command waitpid $pid,0; # Cleanup unlink $f; exit $?/256;' $SHELL -c $COMMAND $PARALLEL_TMP This is an elaborate way of: mkfifo {}; run $COMMAND in the background using $SHELL; copying STDIN to {}; waiting for background to complete; remove {} and exit with the exit code from $COMMAND. It is made this way to be compatible with *csh/fish. --pipepart < $FILE perl -e 'while(@ARGV) { sysseek(STDIN,shift,0) || die; $left = shift; while($read = sysread(STDIN,$buf, ($left > 131072 ? 131072 : $left))){ $left -= $read; syswrite(STDOUT,$buf); } }' $STARTPOS $LENGTH This will read $LENGTH bytes from $FILE starting at $START- POS and send it to STDOUT. --sshlogin $SSHLOGIN ssh $SSHLOGIN "$COMMAND" --transfer ssh $SSHLOGIN mkdir -p ./$WORKDIR; rsync --protocol 30 -rlDzR \ -essh ./{} $SSHLOGIN:./$WORKDIR; ssh $SSHLOGIN "$COMMAND" Read about --protocol 30 in the section Rsync protocol ver- sion. --transferfile file <<todo>> --basefile <<todo>> --return file $COMMAND; _EXIT_status=$?; mkdir -p $WORKDIR; rsync --protocol 30 \ --rsync-path=cd\ ./$WORKDIR\;\ rsync \ -rlDzR -essh $SSHLOGIN:./$FILE ./$WORKDIR; exit $_EXIT_status; The --rsync-path=cd ... is needed because old versions of rsync do not support --no-implied-dirs. The $_EXIT_status trick is to postpone the exit value. This makes it incompatible with *csh and should be fixed in the future. Maybe a wrapping 'sh -c' is enough? --cleanup $RETURN is the wrapper from --return $COMMAND; _EXIT_status=$?; $RETURN; ssh $SSHLOGIN \(rm\ -f\ ./$WORKDIR/{}\;\ rmdir\ ./$WORKDIR\ \>\&/dev/null\;\); exit $_EXIT_status; $_EXIT_status: see --return above. --pipe perl -e 'if(sysread(STDIN, $buf, 1)) { open($fh, "|-", "@ARGV") || die; syswrite($fh, $buf); # Align up to 128k block if($read = sysread(STDIN, $buf, 131071)) { syswrite($fh, $buf); } while($read = sysread(STDIN, $buf, 131072)) { syswrite($fh, $buf); } close $fh; exit ($?&127 ? 128+($?&127) : 1+$?>>8) }' $SHELL -c $COMMAND This small wrapper makes sure that $COMMAND will never be run if there is no data. --tmux <<TODO Fixup with '-quoting>> mkfifo /tmp/tmx3cMEV && sh -c 'tmux -S /tmp/tmsaKpv1 new-session -s p334310 -d "sleep .2" >/dev/null 2>&1'; tmux -S /tmp/tmsaKpv1 new-win- dow -t p334310 -n wc\ 10 \(wc\ 10\)\;\ perl\ -e\ \'while\(\$t++\<3\)\{\ print\ \$ARGV\[0\],\"\\n\"\ \}\'\ \$\?h/\$status\ \>\>\ /tmp/tmx3cMEV\&echo\ wc\\\ 10\;\ echo\ \Job\ finished\ at:\ \`date\`\;sleep\ 10; exec perl -e '$/="/";$_=<>;$c=<>;unlink $ARGV; /(\d+)h/ and exit($1);exit$c' /tmp/tmx3cMEV mkfifo tmpfile.tmx; tmux -S <tmpfile.tms> new-session -s pPID -d 'sleep .2' >&/dev/null; tmux -S <tmpfile.tms> new- window -t pPID -n <<shell quoted input>> \(<<shell quoted input>>\)\;\ perl\ -e\ \'while\(\$t++\<3\)\{\ print\ \$ARGV\[0\],\"\\n\"\ \}\'\ \$\?h/\$status\ \>\>\ tmp- file.tmx\&echo\ <<shell double quoted input>>\;echo\ \Job\ finished\ at:\ \`date\`\;sleep\ 10; exec perl -e '$/="/";$_=<>;$c=<>;unlink $ARGV; /(\d+)h/ and exit($1);exit$c' tmpfile.tmx First a FIFO is made (.tmx). It is used for communicating exit value. Next a new tmux session is made. This may fail if there is already a session, so the output is ignored. If all job slots finish at the same time, then tmux will close the session. A temporary socket is made (.tms) to avoid a race condition in tmux. It is cleaned up when GNU parallel finishes. The input is used as the name of the windows in tmux. When the job inside tmux finishes, the exit value is printed to the FIFO (.tmx). This FIFO is opened by perl outside tmux, and perl then removes the FIFO. Perl blocks until the first value is read from the FIFO, and this value is used as exit value. To make it compatible with csh and bash the exit value is printed as: $?h/$status and this is parsed by perl. There is a bug that makes it necessary to print the exit value 3 times. Another bug in tmux requires the length of the tmux title and command to not have certain limits. When inside these limits, 75 '\ ' are added to the title to force it to be outside the limits. You can map the bad limits using: perl -e 'sub r { int(rand(shift)).($_[0] && "\t".r(@_)) } print map { r(@ARGV)."\n" } 1..10000' 1600 1500 90 | perl -ane '$F[0]+$F[1]+$F[2] < 2037 and print ' | parallel --colsep '\t' --tagstring '{1}\t{2}\t{3}' tmux -S /tmp/p{%}-'{=3 $_="O"x$_ =}' \ new-session -d -n '{=1 $_="O"x$_ =}' true'\ {=2 $_="O"x$_ =};echo $?;rm -f /tmp/p{%}-O*' perl -e 'sub r { int(rand(shift)).($_[0] && "\t".r(@_)) } print map { r(@ARGV)."\n" } 1..10000' 17000 17000 90 | parallel --colsep '\t' --tagstring '{1}\t{2}\t{3}' \ tmux -S /tmp/p{%}-'{=3 $_="O"x$_ =}' new-session -d -n '{=1 $_="O"x$_ =}' true'\ {=2 $_="O"x$_ =};echo $?;rm /tmp/p{%}-O*' > value.csv 2>/dev/null R -e 'a<-read.table("value.csv");X11();plot(a[,1],a[,2],col=a[,4]+5,cex=0.1);Sys.sleep(1000)' For tmux 1.8 17000 can be lowered to 2100. The interesting areas are title 0..1000 with (title + whole command) in 996..1127 and 9331..9636. The ordering of the wrapping is important: * $PARALLEL_ENV which is set in env_parallel.* must be prepended to the command first, as the command may contain exported variables or func- tions. * --nice/--cat/--fifo should be done on the remote machine * --pipepart/--pipe should be done on the local machine inside --tmux Convenience options --nice --basefile --transfer --return --cleanup --tmux --group --compress --cat --fifo --workdir --tag --tagstring These are all convenience options that make it easier to do a task. But more importantly: They are tested to work on corner cases, too. Take --nice as an example: nice parallel command ... will work just fine. But when run remotely, you need to move the nice com- mand so it is being run on the server: parallel -S server nice command ... And this will again work just fine, as long as you are running a single command. When you are running a composed command you need nice to apply to the whole command, and it gets harder still: parallel -S server -q nice bash -c 'command1 ...; cmd2 | cmd3' It is not impossible, but by using --nice GNU parallel will do the right thing for you. Similarly when transferring files: It starts to get hard when the file names contain space, :, `, *, or other special characters. To run the commands in a tmux session you basically just need to quote the command. For simple commands that is easy, but when commands contain spe- cial characters, it gets much harder to get right. --compress not only compresses standard output (stdout) but also standard error (stderr); and it does so into files, that are open but deleted, so a crash will not leave these files around. --cat and --fifo are easy to do by hand, until you want to clean up the tmpfile and keep the exit code of the command. The real killer comes when you try to combine several of these: Doing that correctly for all corner cases is next to impossible to do by hand. --shard The simple way to implement sharding would be to: 1. start n jobs, 2. split each line into columns, 3. select the data from the relevant column 4. compute a hash value from the data 5. take the modulo n of the hash value 6. pass the full line to the jobslot that has the computed value Unfortunately Perl is rather slow at computing the hash value (and somewhat slow at splitting into columns). One solution is to use a compiled language for the splitting and hashing, but that would go against the design criteria of not depending on a com- piler. Luckily those tasks can be parallelized. So GNU parallel starts n sharders that do step 2-6, and passes blocks of 100k to each of those in a round robin manner. To make sure these sharders compute the hash the same way, $PERL_HASH_SEED is set to the same value for all sharders. Running n sharders poses a new problem: Instead of having n outputs (one for each computed value) you now have n outputs for each of the n values, so in total n*n outputs; and you need to merge these n*n outputs together into n outputs. This can be done by simply running 'parallel -j0 --lb cat ::: out- puts_for_one_value', but that is rather inefficient, as it spawns a process for each file. Instead the core code from 'parcat' is run, which is also a bit faster. All the sharders and parcats communicate through named pipes that are un- linked as soon as they are opened. Shell shock The shell shock bug in bash did not affect GNU parallel, but the solutions did. bash first introduced functions in variables named: BASH_FUNC_myfunc() and later changed that to BASH_FUNC_myfunc%%. When transferring functions GNU parallel reads off the function and changes that into a function defin- ition, which is copied to the remote system and executed before the actual command is executed. Therefore GNU parallel needs to know how to read the function. From version 20150122 GNU parallel tries both the ()-version and the %%-version, and the function definition works on both pre- and post-shell shock versions of bash. The remote system wrapper The remote system wrapper does some initialization before starting the com- mand on the remote system. Make quoting unnecessary by hex encoding everything When you run ssh server foo then foo has to be quoted once: ssh server "echo foo; echo bar" If you run ssh server1 ssh server2 foo then foo has to be quoted twice: ssh server1 ssh server2 \'"echo foo; echo bar"\' GNU parallel avoids this by packing everyting into hex values and running a command that does not need quoting: perl -X -e GNU_Parallel_worker,eval+pack+q/H10000000/,join+q//,@ARGV This command reads hex from the command line and converts that to bytes that are then eval'ed as a Perl expression. The string GNU_Parallel_worker is not needed. It is simply there to let the user know, that this process is GNU parallel working. Ctrl-C and standard error (stderr) If the user presses Ctrl-C the user expects jobs to stop. This works out of the box if the jobs are run locally. Unfortunately it is not so simple if the jobs are run remotely. If remote jobs are run in a tty using ssh -tt, then Ctrl-C works, but all output to standard error (stderr) is sent to standard output (stdout). This is not what the user expects. If remote jobs are run without a tty using ssh (without -tt), then output to standard error (stderr) is kept on stderr, but Ctrl-C does not kill re- mote jobs. This is not what the user expects. So what is needed is a way to have both. It seems the reason why Ctrl-C does not kill the remote jobs is because the shell does not propagate the hang-up signal from sshd. But when sshd dies, the parent of the login shell becomes init (process id 1). So by exec'ing a Perl wrapper to monitor the parent pid and kill the child if the parent pid becomes 1, then Ctrl-C works and stderr is kept on stderr. Ctrl-C does, however, kill the ssh connection, so any output from a remote dying process is lost. To be able to kill all (grand)*children a new process group is started. --nice niceing the remote process is done by setpriority(0,0,$nice). A few old systems do not implement this and --nice is unsupported on those. Setting $PARALLEL_TMP $PARALLEL_TMP is used by --fifo and --cat and must point to a non-exitent file in $TMPDIR. This file name is computed on the remote system. The wrapper The wrapper looks like this: $shell = $PARALLEL_SHELL || $SHELL; $tmpdir = $TMPDIR || $PARALLEL_REMOTE_TMPDIR; $nice = $opt::nice; $termseq = $opt::termseq; # Check that $tmpdir is writable -w $tmpdir || die("$tmpdir is not writable.". " Set PARALLEL_REMOTE_TMPDIR"); # Set $PARALLEL_TMP to a non-existent file name in $TMPDIR do { $ENV{PARALLEL_TMP} = $tmpdir."/par". join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5); } while(-e $ENV{PARALLEL_TMP}); # Set $script to a non-existent file name in $TMPDIR do { $script = $tmpdir."/par". join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5); } while(-e $script); # Create a script from the hex code # that removes itself and runs the commands open($fh,">",$script) || die; # ' needed due to rc-shell print($fh("rm \'$script\'\n",$bashfunc.$cmd)); close $fh; my $parent = getppid; my $done = 0; $SIG{CHLD} = sub { $done = 1; }; $pid = fork; unless($pid) { # Make own process group to be able to kill HUP it later eval { setpgrp }; # Set nice value eval { setpriority(0,0,$nice) }; # Run the script exec($shell,$script); die("exec failed: $!"); } while((not $done) and (getppid == $parent)) { # Parent pid is not changed, so sshd is alive # Exponential sleep up to 1 sec $s = $s < 1 ? 0.001 + $s * 1.03 : $s; select(undef, undef, undef, $s); } if(not $done) { # sshd is dead: User pressed Ctrl-C # Kill as per --termseq my @term_seq = split/,/,$termseq; if(not @term_seq) { @term_seq = ("TERM",200,"TERM",100,"TERM",50,"KILL",25); } while(@term_seq && kill(0,-$pid)) { kill(shift @term_seq, -$pid); select(undef, undef, undef, (shift @term_seq)/1000); } } wait; exit ($?&127 ? 128+($?&127) : 1+$?>>8) Transferring of variables and functions Transferring of variables and functions given by --env is done by running a Perl script remotely that calls the actual command. The Perl script sets $ENV{variable} to the correct value before exec'ing a shell that runs the function definition followed by the actual command. The function env_parallel copies the full current environment into the en- vironment variable PARALLEL_ENV. This variable is picked up by GNU parallel and used to create the Perl script mentioned above. Base64 encoded bzip2 csh limits words of commands to 1024 chars. This is often too little when GNU parallel encodes environment variables and wraps the command with dif- ferent templates. All of these are combined and quoted into one single word, which often is longer than 1024 chars. When the line to run is > 1000 chars, GNU parallel therefore encodes the line to run. The encoding bzip2s the line to run, converts this to base64, splits the base64 into 1000 char blocks (so csh does not fail), and prepends it with this Perl script that decodes, decompresses and evals the line. @GNU_Parallel=("use","IPC::Open3;","use","MIME::Base64"); eval "@GNU_Parallel"; $SIG{CHLD}="IGNORE"; # Search for bzip2. Not found => use default path my $zip = (grep { -x $_ } "/usr/local/bin/bzip2")[0] || "bzip2"; # $in = stdin on $zip, $out = stdout from $zip my($in, $out,$eval); open3($in,$out,">&STDERR",$zip,"-dc"); if(my $perlpid = fork) { close $in; $eval = join "", <$out>; close $out; } else { close $out; # Pipe decoded base64 into 'bzip2 -dc' print $in (decode_base64(join"",@ARGV)); close $in; exit; } wait; eval $eval; Perl and bzip2 must be installed on the remote system, but a small test showed that bzip2 is installed by default on all platforms that runs GNU parallel, so this is not a big problem. The added bonus of this is that much bigger environments can now be trans- ferred as they will be below bash's limit of 131072 chars. Which shell to use Different shells behave differently. A command that works in tcsh may not work in bash. It is therefore important that the correct shell is used when GNU parallel executes commands. GNU parallel tries hard to use the right shell. If GNU parallel is called from tcsh it will use tcsh. If it is called from bash it will use bash. It does this by looking at the (grand)*parent process: If the (grand)*parent process is a shell, use this shell; otherwise look at the parent of this (grand)*parent. If none of the (grand)*parents are shells, then $SHELL is used. This will do the right thing if called from: * an interactive shell * a shell script * a Perl script in `` or using system if called as a single string. While these cover most cases, there are situations where it will fail: * When run using exec. * When run as the last command using -c from another shell (because some shells use exec): zsh% bash -c "parallel 'echo {} is not run in bash; \ set | grep BASH_VERSION' ::: This" You can work around that by appending '&& true': zsh% bash -c "parallel 'echo {} is run in bash; \ set | grep BASH_VERSION' ::: This && true" * When run in a Perl script using system with parallel as the first string: #!/usr/bin/perl system("parallel",'setenv a {}; echo $a',":::",2); Here it depends on which shell is used to call the Perl script. If the Perl script is called from tcsh it will work just fine, but if it is called from bash it will fail, because the command setenv is not known to bash. If GNU parallel guesses wrong in these situation, set the shell using $PAR- ALLEL_SHELL. Always running commands in a shell If the command is a simple command with no redirection and setting of vari- ables, the command could be run without spawning a shell. E.g. this simple grep matching either 'ls ' or ' wc >> c': parallel "grep -E 'ls | wc >> c' {}" ::: foo could be run as: system("grep","-E","ls | wc >> c","foo"); However, as soon as the command is a bit more complex a shell must be spawned: parallel "grep -E 'ls | wc >> c' {} | wc >> c" ::: foo parallel "LANG=C grep -E 'ls | wc >> c' {}" ::: foo It is impossible to tell how | wc >> c should be interpreted without pars- ing the string (is the | a pipe in shell or an alternation in a grep reg- exp? Is LANG=C a command in csh or setting a variable in bash? Is >> redi- rection or part of a regexp?). On top of this, wrapper scripts will often require a shell to be spawned. The downside is that you need to quote special shell chars twice: parallel echo '*' ::: This will expand the asterisk parallel echo "'*'" ::: This will not parallel "echo '*'" ::: This will not parallel echo '\*' ::: This will not parallel echo \''*'\' ::: This will not parallel -q echo '*' ::: This will not -q will quote all special chars, thus redirection will not work: this prints '* > out.1' and does not save '*' into the file out.1: parallel -q echo "*" ">" out.{} ::: 1 GNU parallel tries to live up to Principle Of Least Astonishment (POLA), and the requirement of using -q is hard to understand, when you do not see the whole picture. Quoting Quoting depends on the shell. For most shells '-quoting is used for strings containing special characters. For tcsh/csh newline is quoted as \ followed by newline. Other special characters are also \-quoted. For rc everything is quoted using '. --pipepart vs. --pipe While --pipe and --pipepart look much the same to the user, they are imple- mented very differently. With --pipe GNU parallel reads the blocks from standard input (stdin), which is then given to the command on standard input (stdin); so every block is being processed by GNU parallel itself. This is the reason why --pipe maxes out at around 500 MB/sec. --pipepart, on the other hand, first identifies at which byte positions blocks start and how long they are. It does that by seeking into the file by the size of a block and then reading until it meets end of a block. The seeking explains why GNU parallel does not know the line number and why -L/-l and -N do not work. With a reasonable block and file size this seeking is more than 1000 time faster than reading the full file. The byte positions are then given to a small script that reads from position X to Y and sends output to standard output (stdout). This small script is prepended to the command and the full command is executed just as if GNU parallel had been in its normal mode. The script looks like this: < file perl -e 'while(@ARGV) { sysseek(STDIN,shift,0) || die; $left = shift; while($read = sysread(STDIN,$buf, ($left > 131072 ? 131072 : $left))){ $left -= $read; syswrite(STDOUT,$buf); } }' startbyte length_in_bytes It delivers 1 GB/s per core. Instead of the script dd was tried, but many versions of dd do not support reading from one byte to another and might cause partial data. See this for a surprising example: yes | dd bs=1024k count=10 | wc --block-size adjustment Every time GNU parallel detects a record bigger than --block-size it in- creases the block size by 30%. A small --block-size gives very poor perfor- mance; by exponentially increasing the block size performance will not suf- fer. GNU parallel will waste CPU power if --block-size does not contain a full record, because it tries to find a full record and will fail to do so. The recommendation is therefore to use a --block-size > 2 records, so you al- ways get at least one full record when you read one block. If you use -N then --block-size should be big enough to contain N+1 records. Automatic --block-size computation With --pipepart GNU parallel can compute the --block-size automatically. A --block-size of -1 will use a block size so that each jobslot will receive approximately 1 block. --block -2 will pass 2 blocks to each jobslot and -n will pass n blocks to each jobslot. This can be done because --pipepart reads from files, and we can compute the total size of the input. --jobs and --onall When running the same commands on many servers what should --jobs signify? Is it the number of servers to run on in parallel? Is it the number of jobs run in parallel on each server? GNU parallel lets --jobs represent the number of servers to run on in par- allel. This is to make it possible to run a sequence of commands (that can- not be parallelized) on each server, but run the same sequence on multiple servers. --shuf When using --shuf to shuffle the jobs, all jobs are read, then they are shuffled, and finally executed. When using SQL this makes the --sqlmaster be the part that shuffles the jobs. The --sqlworkers simply executes ac- cording to Seq number. --csv --pipepart is incompatible with --csv because you can have records like: a,b,c a," a,b,c a,b,c a,b,c ",c a,b,c Here the second record contains a multi-line field that looks like records. Since --pipepart does not read then whole file when searching for record endings, it may start reading in this multi-line field, which would be wrong. Buffering on disk GNU parallel buffers output, because if output is not buffered you have to be ridiculously careful on sizes to avoid mixing of outputs (see excellent example on https://catern.com/posts/pipes.html). GNU parallel buffers on disk in $TMPDIR using files, that are removed as soon as they are created, but which are kept open. So even if GNU parallel is killed by a power outage, there will be no files to clean up afterwards. Another advantage is that the file system is aware that these files will be lost in case of a crash, so it does not need to sync them to disk. It gives the odd situation that a disk can be fully used, but there are no visible files on it. Partly buffering in memory When using output formats SQL and CSV then GNU Parallel has to read the whole output into memory. When run normally it will only read the output from a single job. But when using --linebuffer every line printed will also be buffered in memory - for all jobs currently running. If memory is tight, then do not use the output format SQL/CSV with --lineb- uffer. Comparing to buffering in memory gargs is a parallelizing tool that buffers in memory. It is therefore a useful way of comparing the advantages and disadvantages of buffering in memory to buffering on disk. On an system with 6 GB RAM free and 6 GB free swap these were tested with different sizes: echo /dev/zero | gargs "head -c $size {}" >/dev/null echo /dev/zero | parallel "head -c $size {}" >/dev/null The results are here: JobRuntime Command 0.344 parallel_test 1M 0.362 parallel_test 10M 0.640 parallel_test 100M 9.818 parallel_test 1000M 23.888 parallel_test 2000M 30.217 parallel_test 2500M 30.963 parallel_test 2750M 34.648 parallel_test 3000M 43.302 parallel_test 4000M 55.167 parallel_test 5000M 67.493 parallel_test 6000M 178.654 parallel_test 7000M 204.138 parallel_test 8000M 230.052 parallel_test 9000M 255.639 parallel_test 10000M 757.981 parallel_test 30000M 0.537 gargs_test 1M 0.292 gargs_test 10M 0.398 gargs_test 100M 3.456 gargs_test 1000M 8.577 gargs_test 2000M 22.705 gargs_test 2500M 123.076 gargs_test 2750M 89.866 gargs_test 3000M 291.798 gargs_test 4000M GNU parallel is pretty much limited by the speed of the disk: Up to 6 GB data is written to disk but cached, so reading is fast. Above 6 GB data are both written and read from disk. When the 30000MB job is running, the disk system is slow, but usable: If you are not using the disk, you almost do not feel it. gargs has a speed advantage up until 2500M where it hits a wall. Then the system starts swapping like crazy and is completely unusable. At 5000M it goes out of memory. You can make GNU parallel behave similar to gargs if you point $TMPDIR to a tmpfs-filesystem: It will be faster for small outputs, but may kill your system for larger outputs and cause you to lose output. Disk full GNU parallel buffers on disk. If the disk is full, data may be lost. To check if the disk is full GNU parallel writes a 8193 byte file every sec- ond. If this file is written successfully, it is removed immediately. If it is not written successfully, the disk is full. The size 8193 was chosen be- cause 8192 gave wrong result on some file systems, whereas 8193 did the correct thing on all tested filesystems. Memory usage Normally GNU parallel will use around 17 MB RAM constantly - no matter how many jobs or how much output there is. There are a few things that cause the memory usage to rise: * Multiple input sources. GNU parallel reads an input source only once. This is by design, as an input source can be a stream (e.g. FIFO, pipe, standard input (stdin)) which cannot be rewound and read again. When reading a single input source, the memory is freed as soon as the job is done - thus keeping the memory usage constant. But when reading multiple input sources GNU parallel keeps the already read values for generating all combinations with other input sources. * Computing the number of jobs. --bar, --eta, and --halt xx% use to- tal_jobs() to compute the total number of jobs. It does this by generat- ing the data structures for all jobs. All these job data structures will be stored in memory and take up around 400 bytes/job. * Buffering a full line. --linebuffer will read a full line per running job. A very long output line (say 1 GB without \n) will increase RAM us- age temporarily: From when the beginning of the line is read till the line is printed. * Buffering the full output of a single job. This happens when using --re- sults *.csv/*.tsv or --sql*. Here GNU parallel will read the whole out- put of a single job and save it as csv/tsv or SQL. Argument separators ::: :::: :::+ ::::+ The argument separator ::: was chosen because I have never seen ::: used in any command. The natural choice -- would be a bad idea since it is not un- likely that the template command will contain --. I have seen :: used in programming languanges to separate classes, and I did not want the user to be confused that the separator had anything to do with classes. ::: also makes a visual separation, which is good if there are multiple :::. When ::: was chosen, :::: came as a fairly natural extension. Linking input sources meant having to decide for some way to indicate link- ing of ::: and ::::. :::+ and ::::+ were chosen, so that they were similar to ::: and ::::. In 2022 I realized that /// would have been an even better choice, because you cannot have an file named /// whereas you can have a file named :::. Perl replacement strings, {= =}, and --rpl The shorthands for replacement strings make a command look more cryptic. Different users will need different replacement strings. Instead of invent- ing more shorthands you get more flexible replacement strings if they can be programmed by the user. The language Perl was chosen because GNU parallel is written in Perl and it was easy and reasonably fast to run the code given by the user. If a user needs the same programmed replacement string again and again, the user may want to make his own shorthand for it. This is what --rpl is for. It works so well, that even GNU parallel's own shorthands are implemented using --rpl. In Perl code the bigrams {= and =} rarely exist. They look like a matching pair and can be entered on all keyboards. This made them good candidates for enclosing the Perl expression in the replacement strings. Another can- didate ,, and ,, was rejected because they do not look like a matching pair. --parens was made, so that the users can still use ,, and ,, if they like: --parens ,,,, Internally, however, the {= and =} are replaced by \257< and \257>. This is to make it simpler to make regular expressions. You only need to look one character ahead, and never have to look behind. Test suite GNU parallel uses its own testing framework. This is mostly due to histori- cal reasons. It deals reasonably well with tests that are dependent on how long a given test runs (e.g. more than 10 secs is a pass, but less is a fail). It parallelizes most tests, but it is easy to force a test to run as the single test (which may be important for timing issues). It deals rea- sonably well with tests that fail intermittently. It detects which tests failed and pushes these to the top, so when running the test suite again, the tests that failed most recently are run first. If GNU parallel should adopt a real testing framework then those elements would be important. Since many tests are dependent on which hardware it is running on, these tests break when run on a different hardware than what the test was written for. When most bugs are fixed a test is added, so this bug will not reappear. It is, however, sometimes hard to create the environment in which the bug shows up - especially if the bug only shows up sometimes. One of the harder problems was to make a machine start swapping without forcing it to its knees. Median run time Using a percentage for --timeout causes GNU parallel to compute the median run time of a job. The median is a better indicator of the expected run time than average, because there will often be outliers taking way longer than the normal run time. To avoid keeping all run times in memory, an implementation of remedian was made (Rousseeuw et al). Error messages and warnings Error messages like: ERROR, Not found, and 42 are not very helpful. GNU parallel strives to inform the user: * What went wrong? * Why did it go wrong? * What can be done about it? Unfortunately it is not always possible to predict the root cause of the error. Determine number of CPUs CPUs is an ambiguous term. It can mean the number of socket filled (i.e. the number of physical chips). It can mean the number of cores (i.e. the number of physical compute cores). It can mean the number of hyperthreaded cores (i.e. the number of virtual cores - with some of them possibly being hyperthreaded). On ark.intel.com Intel uses the terms cores and threads for number of phys- ical cores and the number of hyperthreaded cores respectively. GNU parallel uses uses CPUs as the number of compute units and the terms sockets, cores, and threads to specify how the number of compute units is calculated. Computation of load Contrary to the obvious --load does not use load average. This is due to load average rising too slowly. Instead it uses ps to list the number of threads in running or blocked state (state D, O or R). This gives an in- stant load. As remote calculation of load can be slow, a process is spawned to run ps and put the result in a file, which is then used next time. Killing jobs GNU parallel kills jobs. It can be due to --memfree, --halt, or when GNU parallel meets a condition from which it cannot recover. Every job is started as its own process group. This way any (grand)*children will get killed, too. The process group is killed with the specification mentioned in --termseq. SQL interface GNU parallel uses the DBURL from GNU sql to give database software, user- name, password, host, port, database, and table in a single string. The DBURL must point to a table name. The table will be dropped and cre- ated. The reason for not reusing an existing table is that the user may have added more input sources which would require more columns in the ta- ble. By prepending '+' to the DBURL the table will not be dropped. The table columns are similar to joblog with the addition of V1 .. Vn which are values from the input sources, and Stdout and Stderr which are the out- put from standard output and standard error, respectively. The Signal column has been renamed to _Signal due to Signal being a re- served word in MySQL. Logo The logo is inspired by the Cafe Wall illusion. The font is DejaVu Sans. Citation notice For details: See https://git.savannah.gnu.org/cgit/paral- lel.git/tree/doc/citation-notice-faq.txt Funding a free software project is hard. GNU parallel is no exception. On top of that it seems the less visible a project is, the harder it is to get funding. And the nature of GNU parallel is that it will never be seen by "the guy with the checkbook", but only by the people doing the actual work. This problem has been covered by others - though no solution has been found: https://www.slideshare.net/NadiaEghbal/consider-the-maintainer https://www.numfocus.org/blog/why-is-numpy-only-now-getting-funded/ Before implementing the citation notice it was discussed with the users: https://lists.gnu.org/archive/html/parallel/2013-11/msg00006.html Having to spend 10 seconds on running parallel --citation once is no doubt not an ideal solution, but no one has so far come up with an ideal solution - neither for funding GNU parallel nor other free software. If you believe you have the perfect solution, you should try it out, and if it works, you should post it on the email list. Ideas that will cost work and which have not been tested are, however, unlikely to be prioritized. Running parallel --citation one single time takes less than 10 seconds, and will silence the citation notice for future runs. This is comparable to graphical tools where you have to click a checkbox saying "Do not show this again". But if that is too much trouble for you, why not use one of the al- ternatives instead? See a list in: man parallel_alternatives. As the request for citation is not a legal requirement this is acceptable under GPLv3 and cleared with Richard M. Stallman himself. Thus it does not fall under this: https://www.gnu.org/licenses/gpl-faq.en.html#RequireCita- tion Ideas for new design Multiple processes working together Open3 is slow. Printing is slow. It would be good if they did not tie up resources, but were run in separate threads. --rrs on remote using a perl wrapper ... | perl -pe '$/=$recend$recstart;BEGIN{ if(substr($_) eq $recstart) sub- str($_)="" } eof and substr($_) eq $recend) substr($_)="" It ought to be possible to write a filter that removed rec sep on the fly instead of inside GNU parallel. This could then use more cpus. Will that require 2x record size memory? Will that require 2x block size memory? Historical decisions These decisions were relevant for earlier versions of GNU parallel, but not the current version. They are kept here as historical record. --tollef You can read about the history of GNU parallel on https://www.gnu.org/soft- ware/parallel/history.html --tollef was included to make GNU parallel switch compatible with the par- allel from moreutils (which is made by Tollef Fog Heen). This was done so that users of that parallel easily could port their use to GNU parallel: Simply set PARALLEL="--tollef" and that would be it. But several distributions chose to make --tollef global (by putting it into /etc/parallel/config) without making the users aware of this, and that caused much confusion when people tried out the examples from GNU paral- lel's man page and these did not work. The users became frustrated because the distribution did not make it clear to them that it has made --tollef global. So to lessen the frustration and the resulting support, --tollef was obso- leted 20130222 and removed one year later. 20260122 2026-01-31 PARALLEL_DESIGN(7)
Design of GNU Parallel | Ideas for new design | Historical decisions
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=parallel_design&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>