PCRE2BUILD(3) Library Functions Manual PCRE2BUILD(3) NAME PCRE2 - Perl-compatible regular expressions (revised API) BUILDING PCRE2 PCRE2 is distributed with a configure script that can be used to build the library in Unix-like environments using the Autotools applications. Also in the distribution are files to support building using CMake instead of con- figure. The text file README contains general information about building with Autotools (some of which is repeated below), and also has some com- ments about building on various operating systems. The files in the vms di- rectory support building under OpenVMS. There is a lot more information about building PCRE2 without using Autotools (including information about using CMake and building "by hand") in the text file called NON-AUTOTOOLS- BUILD. You should consult this file as well as the README file if you are building in a non-Unix-like environment. PCRE2 BUILD-TIME OPTIONS The rest of this document describes the optional features of PCRE2 that can be selected when the library is compiled. It assumes use of the configure script, where the optional features are selected or deselected by providing options to configure before running the make command. However, the same op- tions can be selected in both Unix-like and non-Unix-like environments if you are using CMake instead of configure to build PCRE2. If you are not using Autotools or CMake, option selection can be done by editing the config.h file, or by passing parameter settings to the com- piler, as described in NON-AUTOTOOLS-BUILD. The complete list of options for configure (which includes the standard ones such as the selection of the installation directory) can be obtained by running ./configure --help The following sections include descriptions of "on/off" options whose names begin with --enable or --disable. Because of the way that configure works, --enable and --disable always come in pairs, so the complementary option always exists as well, but as it specifies the default, it is not de- scribed. Options that specify values have names that start with --with. At the end of a configure run, a summary of the configuration is output. BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES By default, a library called libpcre2-8 is built, containing functions that take string arguments contained in arrays of bytes, interpreted either as single-byte characters, or UTF-8 strings. You can also build two other li- braries, called libpcre2-16 and libpcre2-32, which process strings that are contained in arrays of 16-bit and 32-bit code units, respectively. These can be interpreted either as single-unit characters or UTF-16/UTF-32 strings. To build these additional libraries, add one or both of the fol- lowing to the configure command: --enable-pcre2-16 --enable-pcre2-32 If you do not want the 8-bit library, add --disable-pcre2-8 as well. At least one of the three libraries must be built. Note that the POSIX wrapper is for the 8-bit library only, and that pcre2grep is an 8-bit program. Neither of these are built if you select only the 16-bit or 32-bit libraries. BUILDING SHARED AND STATIC LIBRARIES The Autotools PCRE2 building process uses libtool to build both shared and static libraries by default. You can suppress an unwanted library by adding one of --disable-shared --disable-static to the configure command. Setting --disable-shared ensures that PCRE2 li- braries are built as static libraries. The binaries that are then created as part of the build process (for example, pcre2test and pcre2grep) are linked statically with one or more PCRE2 libraries, but may also be dynami- cally linked with other libraries such as libc. If you want these binaries to be fully statically linked, you can set LDFLAGS like this: LDFLAGS=--static ./configure --disable-shared Note the two hyphens in --static. Of course, this works only if static ver- sions of all the relevant libraries are available for linking. UNICODE AND UTF SUPPORT By default, PCRE2 is built with support for Unicode and UTF character strings. To build it without Unicode support, add --disable-unicode to the configure command. This setting applies to all three libraries. It is not possible to build one library with Unicode support and another with- out in the same configuration. Of itself, Unicode support does not make PCRE2 treat strings as UTF-8, UTF-16 or UTF-32. To do that, applications that use the library can set the PCRE2_UTF option when they call pcre2_compile() to compile a pattern. Al- ternatively, patterns may be started with (*UTF) unless the application has locked this out by setting PCRE2_NEVER_UTF. UTF support allows the libraries to process character code points up to 0x10ffff in the strings that they handle. Unicode support also gives access to the Unicode properties of characters, using pattern escapes such as \P, \p, and \X. Only the general category properties such as Lu and Nd, script names, and some bi-directional and binary properties are supported. De- tails are given in the pcre2pattern documentation. Pattern escapes such as \d and \w do not by default make use of Unicode properties. The application can request that they do by setting the PCRE2_UCP option. Unless the application has set PCRE2_NEVER_UCP, a pattern may also request this by starting with (*UCP). DISABLING THE USE OF \C The \C escape sequence, which matches a single code unit, even in a UTF mode, can cause unpredictable behaviour because it may leave the current matching point in the middle of a multi-code-unit character. The applica- tion can lock it out by setting the PCRE2_NEVER_BACKSLASH_C option when calling pcre2_compile(). There is also a build-time option --enable-never-backslash-C (note the upper case C) which locks out the use of \C entirely. JUST-IN-TIME COMPILER SUPPORT Just-in-time (JIT) compiler support is included in the build by specifying --enable-jit This support is available only for certain hardware architectures. If this option is set for an unsupported architecture, a building error occurs. If in doubt, use --enable-jit=auto which enables JIT only if the current hardware is supported. You can check if JIT is enabled in the configuration summary that is output at the end of a configure run. If you are enabling JIT under SELinux you may also want to add --enable-jit-sealloc which enables the use of an execmem allocator in JIT that is compatible with SELinux. This has no effect if JIT is not enabled. See the pcre2jit documentation for a discussion of JIT usage. When JIT support is enabled, pcre2grep automatically makes use of it, unless you add --disable-pcre2grep-jit to the configure command. NEWLINE RECOGNITION By default, PCRE2 interprets the linefeed (LF) character as indicating the end of a line. This is the normal newline character on Unix-like systems. You can compile PCRE2 to use carriage return (CR) instead, by adding --enable-newline-is-cr to the configure command. There is also an --enable-newline-is-lf option, which explicitly specifies linefeed as the newline character. Alternatively, you can specify that line endings are to be indicated by the two-character sequence CRLF (CR immediately followed by LF). If you want this, add --enable-newline-is-crlf to the configure command. There is a fourth option, specified by --enable-newline-is-anycrlf which causes PCRE2 to recognize any of the three sequences CR, LF, or CRLF as indicating a line ending. A fifth option, specified by --enable-newline-is-any causes PCRE2 to recognize any Unicode newline sequence. The Unicode newline sequences are the three just mentioned, plus the single characters VT (ver- tical tab, U+000B), FF (form feed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS (paragraph separator, U+2029). The final option is --enable-newline-is-nul which causes NUL (binary zero) to be set as the default line-ending charac- ter. Whatever default line ending convention is selected when PCRE2 is built can be overridden by applications that use the library. At build time it is recommended to use the standard for your operating system. WHAT \R MATCHES By default, the sequence \R in a pattern matches any Unicode newline se- quence, independently of what has been selected as the line ending se- quence. If you specify --enable-bsr-anycrlf the default is changed so that \R matches only CR, LF, or CRLF. Whatever is selected when PCRE2 is built can be overridden by applications that use the library. HANDLING VERY LARGE PATTERNS Within a compiled pattern, offset values are used to point from one part to another (for example, from an opening parenthesis to an alternation metacharacter). By default, in the 8-bit and 16-bit libraries, two-byte values are used for these offsets, leading to a maximum size for a compiled pattern of around 64 thousand code units. This is sufficient to handle all but the most gigantic patterns. Nevertheless, some people do want to process truly enormous patterns, so it is possible to compile PCRE2 to use three-byte or four-byte offsets by adding a setting such as --with-link-size=3 to the configure command. The value given must be 2, 3, or 4. For the 16-bit library, a value of 3 is rounded up to 4. In these libraries, using longer offsets slows down the operation of PCRE2 because it has to load ad- ditional data when handling them. For the 32-bit library the value is al- ways 4 and cannot be overridden; the value of --with-link-size is ignored. LIMITING PCRE2 RESOURCE USAGE The pcre2_match() function increments a counter each time it goes round its main loop. Putting a limit on this counter controls the amount of computing resource used by a single call to pcre2_match(). The limit can be changed at run time, as described in the pcre2api documentation. The default is 10 million, but this can be changed by adding a setting such as --with-match-limit=500000 to the configure command. This setting also applies to the pcre2_dfa_match() matching function, and to JIT matching (though the count- ing is done differently). The pcre2_match() function uses heap memory to record backtracking points. The more nested backtracking points there are (that is, the deeper the search tree), the more memory is needed. There is an upper limit, specified in kibibytes (units of 1024 bytes). This limit can be changed at run time, as described in the pcre2api documentation. The default limit (in effect unlimited) is 20 million. You can change this by a setting such as --with-heap-limit=500 which limits the amount of heap to 500 KiB. This limit applies only to in- terpretive matching in pcre2_match() and pcre2_dfa_match(), which may also use the heap for internal workspace when processing complicated patterns. This limit does not apply when JIT (which has its own memory arrangements) is used. You can also explicitly limit the depth of nested backtracking in the pcre2_match() interpreter. This limit defaults to the value that is set for --with-match-limit. You can set a lower default limit by adding, for exam- ple, --with-match-limit-depth=10000 to the configure command. This value can be overridden at run time. This depth limit indirectly limits the amount of heap memory that is used, but because the size of each backtracking "frame" depends on the number of cap- turing parentheses in a pattern, the amount of heap that is used before the limit is reached varies from pattern to pattern. This limit was more useful in versions before 10.30, where function recursion was used for backtrack- ing. As well as applying to pcre2_match(), the depth limit also controls the depth of recursive function calls in pcre2_dfa_match(). These are used for lookaround assertions, atomic groups, and recursion within patterns. The limit does not apply to JIT matching. LIMITING VARIABLE-LENGTH LOOKBEHIND ASSERTIONS Lookbehind assertions in which one or more branches can match a variable number of characters are supported only if there is a maximum matching length for each top-level branch. There is a limit to this maximum that de- faults to 255 characters. You can alter this default by a setting such as --with-max-varlookbehind=100 The limit can be changed at runtime by calling pcre2_set_max_varlookbe- hind(). Lookbehind assertions in which every branch matches a fixed number of characters (not necessarily all the same) are not constrained by this limit. CREATING CHARACTER TABLES AT BUILD TIME PCRE2 uses fixed tables for processing characters whose code points are less than 256. By default, PCRE2 is built with a set of tables that are distributed in the file src/pcre2_chartables.c.dist. These tables are for ASCII codes only. If you add --enable-rebuild-chartables to the configure command, the distributed tables are no longer used. In- stead, a program called pcre2_dftables is compiled and run. This outputs the source for new set of tables, created in the default locale of your C run-time system. This method of replacing the tables does not work if you are cross compiling, because pcre2_dftables needs to be run on the local host and therefore not compiled with the cross compiler. If you need to create alternative tables when cross compiling, you will have to do so "by hand". There may also be other reasons for creating ta- bles manually. To cause pcre2_dftables to be built on the local host, run a normal compiling command, and then run the program with the output file as its argument, for example: cc src/pcre2_dftables.c -o pcre2_dftables ./pcre2_dftables src/pcre2_chartables.c This builds the tables in the default locale of the local host. If you want to specify a locale, you must use the -L option: LC_ALL=fr_FR ./pcre2_dftables -L src/pcre2_chartables.c You can also specify -b (with or without -L). This causes the tables to be written in binary instead of as source code. A set of binary tables can be loaded into memory by an application and passed to pcre2_compile() in the same way as tables created by calling pcre2_maketables(). The tables are just a string of bytes, independent of hardware characteristics such as en- dianness. This means they can be bundled with an application that runs in different environments, to ensure consistent behaviour. USING EBCDIC CODE PCRE2 assumes by default that it will run in an environment where the char- acter code is ASCII or Unicode, which is a superset of ASCII. This is the case for most computer operating systems. PCRE2 can, however, be compiled to run in an 8-bit EBCDIC environment by adding --enable-ebcdic --disable-unicode to the configure command. You should only use it if you know that you are in an EBCDIC environment (for example, an IBM mainframe operating system). This setting implies --enable-rebuild-chartables, in order to ensure that you have the correct default character tables for your system's codepage. There is an exception when you set --enable-ebcdic-ignoring-compiler (see below), which allows using a default set of EBCDIC 1047 character tables rather than forcing use of --enable-rebuild-chartables. It is not supported to enable both EBCDIC input and either ASCII or UTF-8/16/32 in the same build of the library. When PCRE2 is built with EBCDIC support, it always operates in EBCDIC, and consequently --enable- unicode and --enable-ebcdic are mutually exclusive. The EBCDIC character that corresponds to an ASCII LF is assumed to have the value 0x15 by default. However, in some EBCDIC environments, 0x25 is used. In such an environment you should use --enable-ebcdic-nl25 (which implies --enable-ebcdic). The EBCDIC character for CR has the same value as in ASCII, namely, 0x0d. Whichever of 0x15 and 0x25 is not chosen as LF is made to correspond to the Unicode NEL character (which, in Uni- code, is 0x85). The options that select newline behaviour, such as --enable-newline-is-cr, and equivalent run-time options, refer to these character values in an EBCDIC environment. On systems requiring an EBCDIC build of PCRE2, the compiler should be set to use the correct codepage, so that C character literals such as 'z' use the correct numeric value for whichever EBCDIC codpage is in use. (PCRE2 cannot support multiple EBCDIC codepages dynamically.) However, if this not possible, then you can use --enable-ebcdic-ignoring-compiler in order to disregard the compiler's codepage, and instead force PCRE2 to use numeric constants corresponding to the EBCDIC 1047 codepage instead. This can be used to build (or test) EBCDIC support on an ASCII/UTF-8 system such as Linux. PCRE2GREP SUPPORT FOR EXTERNAL SCRIPTS By default pcre2grep supports the use of callouts with string arguments within the patterns it is matching. There are two kinds: one that generates output using local code, and another that calls an external program or script. If --disable-pcre2grep-callout-fork is added to the configure com- mand, only the first kind of callout is supported; if --disable-pcre2grep- callout is used, all callouts are completely ignored. For more details of pcre2grep callouts, see the pcre2grep documentation. PCRE2GREP OPTIONS FOR COMPRESSED FILE SUPPORT By default, pcre2grep reads all files as plain text. You can build it so that it recognizes files whose names end in .gz or .bz2, and reads them with libz or libbz2, respectively, by adding one or both of --enable-pcre2grep-libz --enable-pcre2grep-libbz2 to the configure command. These options naturally require that the relevant libraries are installed on your system. Configuration will fail if they are not. PCRE2GREP BUFFER SIZE pcre2grep uses an internal buffer to hold a "window" on the file it is scanning, in order to be able to output "before" and "after" lines when it finds a match. The default starting size of the buffer is 20KiB. The buffer itself is three times this size, but because of the way it is used for holding "before" lines, the longest line that is guaranteed to be process- able is the notional buffer size. If a longer line is encountered, pcre2grep automatically expands the buffer, up to a specified maximum size, whose default is 1MiB or the starting size, whichever is the larger. You can change the default parameter values by adding, for example, --with-pcre2grep-bufsize=51200 --with-pcre2grep-max-bufsize=2097152 to the configure command. The caller of pcre2grep can override these values by using --buffer-size and --max-buffer-size on the command line. PCRE2TEST OPTION FOR LIBREADLINE SUPPORT If you add one of --enable-pcre2test-libreadline --enable-pcre2test-libedit to the configure command, pcre2test is linked with the libreadline or- libedit library, respectively, and when its input is from a terminal, it reads it using the readline() function. This provides line-editing and his- tory facilities. Note that libreadline is GPL-licensed, so if you distrib- ute a binary of pcre2test linked in this way, there may be licensing is- sues. These can be avoided by linking instead with libedit, which has a BSD licence. Setting --enable-pcre2test-libreadline causes the -lreadline option to be added to the pcre2test build. In many operating environments with a system- installed readline library this is sufficient. However, in some environ- ments (e.g. if an unmodified distribution version of readline is in use), some extra configuration may be necessary. The INSTALL file for libreadline says this: "Readline uses the termcap functions, but does not link with the termcap or curses library itself, allowing applications which link with readline the to choose an appropriate library." If your environment has not been set up so that an appropriate library is automatically included, you may need to add something like LIBS="-lncurses" immediately before the configure command. INCLUDING DEBUGGING CODE If you add --enable-debug to the configure command, additional debugging code is included in the build. This feature is intended for use by the PCRE2 maintainers. DEBUGGING WITH VALGRIND SUPPORT If you add --enable-valgrind to the configure command, PCRE2 will use valgrind annotations to mark cer- tain memory regions as unaddressable. This allows it to detect invalid mem- ory accesses, and is mostly useful for debugging PCRE2 itself. CODE COVERAGE REPORTING If your C compiler is gcc, you can build a version of PCRE2 that can gener- ate a code coverage report for its test suite. To enable this, you must in- stall lcov version 1.6 or above. Then specify --enable-coverage to the configure command and build PCRE2 in the usual way. Note that using ccache (a caching C compiler) is incompatible with code coverage reporting. If you have configured ccache to run automatically on your system, you must set the environment variable CCACHE_DISABLE=1 before running make to build PCRE2, so that ccache is not used. When --enable-coverage is used, the following addition targets are added to the Makefile: make coverage This creates a fresh coverage report for the PCRE2 test suite. It is equiv- alent to running "make coverage-reset", "make coverage-baseline", "make check", and then "make coverage-report". make coverage-reset This zeroes the coverage counters, but does nothing else. make coverage-baseline This captures baseline coverage information. make coverage-report This creates the coverage report. make coverage-clean-report This removes the generated coverage report without cleaning the coverage data itself. make coverage-clean-data This removes the captured coverage data without removing the coverage files created at compile time (*.gcno). make coverage-clean This cleans all coverage data including the generated coverage report. For more information about code coverage, see the gcov and lcov documentation. DISABLING THE Z AND T FORMATTING MODIFIERS The C99 standard defines formatting modifiers z and t for size_t and ptrdiff_t values, respectively. By default, PCRE2 uses these modifiers in environments other than old versions of Microsoft Visual Studio when __STDC_VERSION__ is defined and has a value greater than or equal to 199901L (indicating support for C99). However, there is at least one envi- ronment that claims to be C99 but does not support these modifiers. If --disable-percent-zt is specified, no use is made of the z or t modifiers. Instead of %td or %zu, a suitable format is used depending in the size of long for the plat- form. SUPPORT FOR FUZZERS There is a special option for use by people who want to run fuzzing tests on PCRE2: --enable-fuzz-support At present this applies only to the 8-bit library. If set, it causes an ex- tra library called libpcre2-fuzzsupport.a to be built, but not installed. This contains a single function called LLVMFuzzerTestOneInput() whose argu- ments are a pointer to a string and the length of the string. When called, this function tries to compile the string as a pattern, and if that suc- ceeds, to match it. This is done both with no options and with some random options bits that are generated from the string. Setting --enable-fuzz-support also causes a binary called pcre2fuzzcheck to be created. This is normally run under valgrind or used when PCRE2 is com- piled with address sanitizing enabled. It calls the fuzzing function and outputs information about what it is doing. The input strings are specified by arguments: if an argument starts with "=" the rest of it is a literal input string. Otherwise, it is assumed to be a file name, and the contents of the file are the test string. OBSOLETE OPTION In versions of PCRE2 prior to 10.30, there were two ways of handling back- tracking in the pcre2_match() function. The default was to use the system stack, but if --disable-stack-for-recursion was set, memory on the heap was used. From release 10.30 onwards this has changed (the stack is no longer used) and this option now does nothing ex- cept give a warning. SEE ALSO pcre2api(3), pcre2-config(3). AUTHOR Philip Hazel Retired from University Computing Service Cambridge, England. REVISION Last updated: 17 October 2025 Copyright (c) 1997-2024 University of Cambridge. PCRE2 10.47 17 October 2025 PCRE2BUILD(3)
NAME | BUILDING PCRE2 | PCRE2 BUILD-TIME OPTIONS | BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES | BUILDING SHARED AND STATIC LIBRARIES | UNICODE AND UTF SUPPORT | DISABLING THE USE OF \C | JUST-IN-TIME COMPILER SUPPORT | NEWLINE RECOGNITION | WHAT \R MATCHES | HANDLING VERY LARGE PATTERNS | LIMITING PCRE2 RESOURCE USAGE | LIMITING VARIABLE-LENGTH LOOKBEHIND ASSERTIONS | CREATING CHARACTER TABLES AT BUILD TIME | USING EBCDIC CODE | PCRE2GREP SUPPORT FOR EXTERNAL SCRIPTS | PCRE2GREP OPTIONS FOR COMPRESSED FILE SUPPORT | PCRE2GREP BUFFER SIZE | PCRE2TEST OPTION FOR LIBREADLINE SUPPORT | INCLUDING DEBUGGING CODE | DEBUGGING WITH VALGRIND SUPPORT | CODE COVERAGE REPORTING | DISABLING THE Z AND T FORMATTING MODIFIERS | SUPPORT FOR FUZZERS | OBSOLETE OPTION | SEE ALSO | AUTHOR | REVISION
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=pcre2build&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>