FreeBSD Manual Pages
POUNCE(1) General Commands Manual POUNCE(1) NAME pounce -- IRC bouncer SYNOPSIS pounce [-LNTev] [-A local-ca] [-C local-cert] [-H local-host] [-K local-priv] [-P local-port] [-Q queue-interval] [-R blind-req] [-S bind] [-U local-path] [-W local-pass] [-a sasl-plain] [-c client-cert] [-f save] [-h host] [-j join] [-k client-priv] [-m mode] [-n nick] [-p port] [-q quit] [-r real] [-t trust] [-s size] [-u user] [-w pass] [-y away] [config ...] pounce -o [-S bind] [-h host] [-p port] [config ...] pounce [-A ca] -g cert pounce -x DESCRIPTION The pounce program is a multi-client, TLS-only IRC bouncer. It maintains a persistent connection to an IRC server while allowing clients to connect and disconnect, receiving messages that were missed upon reconnection. Clients must uniquely identify themselves to pounce by their IRC username (not nickname). The IRCv3 server-time extension is used to indicate when messages were originally received. See "Client Configuration" for details. The local server portion of pounce requires a TLS certificate, which can be obtained for example by an ACME client such as acme-client(8). The private key must be made readable by the user running pounce. One instance of pounce must be configured for each IRC network. Instances of pounce must either use different local ports with local-port or differ- ent local host names with local-host and local-path to be dispatched from the same port by calico(1). Client connections are not accepted until successful login to the server. If the server connection is lost, the pounce process exits. Options can be loaded from files listed on the command line. Files are searched for in $XDG_CONFIG_DIRS/pounce (usually ~/.config/pounce) unless the path starts with `/', `./' or `../'. Certificate and private key paths are searched for in the same manner. Files and flags listed later on the command line take precedence over those listed earlier. Each option is placed on a line, and lines beginning with `#' are ignored. The options are listed below following their corresponding flags. Local Server Options -A path | local-ca = path Require clients to authenticate using a TLS client certificate ei- ther contained in or signed by a certificate in the file loaded from path. The file is reloaded when the SIGUSR1 signal is re- ceived. See "Generating Client Certificates". If local-pass is also set, clients may instead authenticate with a server password. -C path | local-cert = path Load TLS certificate from path. The file is reloaded when the SIGUSR1 signal is received. The default path is host.pem, where host is set by local-host. -H host | local-host = host Bind to host. The default host is localhost. -K path | local-priv = path Load TLS private key from path. The file is reloaded when the SIGUSR1 signal is received. The default path is host.key, where host is set by local-host. -L | palaver Advertise the palaverapp.com IRCv3 vendor-specific capability to clients. This option only enables the capability; push notifica- tions must be provided by the pounce-palaver(1) special-purpose client. -P port | local-port = port Bind to port. The default port is 6697. -T | no-sts Do not advertise a strict transport security (STS) policy to clients. -U path | local-path = path Bind to a UNIX-domain socket at path. Clients are only accepted as dispatched by calico(1). If path is a directory, the host set by local-host is appended to it. This option takes precedence over local-host and local-port. -W pass | local-pass = pass Require the server password pass for clients to connect. The pass string must be hashed using -x. If local-ca is also set, clients may instead authenticate using a TLS client certificate. -f path | save = path Save and load the contents of the buffer from path in $XDG_DATA_DIRS/pounce, usually ~/.local/share/pounce, or an ab- solute or relative path if path starts with `/', `./' or `../'. The file is truncated after loading. -s size | size = size Set the number of messages contained in the buffer to size. This sets the maximum number of recent messages which can be relayed to a reconnecting client. The size must be a power of two. The de- fault size is 4096. Remote Server Options -N | no-names Do not request `NAMES' for each channel when a client connects. This avoids already connected clients receiving unsolicited re- sponses but prevents new clients from populating user lists. -Q ms | queue-interval = ms Set the server send queue interval in milliseconds. The queue is used to send automated messages from pounce to the server. Mes- sages from clients are sent to the server directly. The default interval is 200 milliseconds. -R caps | blind-req = caps Blindly request the IRCv3 capabilities caps, which must be sup- ported by pounce. This can be used to enable hidden capabilities, such as userhost-in-names on some networks. -S host | bind = host Bind to source address host when connecting to the server. To con- nect from any address over IPv4 only, use 0.0.0.0. To connect from any address over IPv6 only, use ::. -a user:pass | sasl-plain = user:pass Authenticate as user with pass using SASL PLAIN. Since this method requires the account password in plaintext, it is recommended to use CertFP instead with sasl-external. -c path | client-cert = path Load the TLS client certificate from path. If the private key is in a separate file, it is loaded with client-priv. With sasl-external, authenticate using SASL EXTERNAL. Certificates can be generated with -g. -e | sasl-external Authenticate using SASL EXTERNAL, also known as CertFP. The TLS client certificate is loaded with client-cert. See "Configuring CertFP". -h host | host = host Connect to host. -j channels [keys] | join = channels [keys] Join the comma-separated list of channels with the optional comma- separated list of channel keys. -k path | client-priv = path Load the TLS client private key from path. -m mode | mode = mode Set the user mode. -n nick | nick = nick Set nickname to nick. The default nickname is the user's name. -p port | port = port Connect to port. The default port is 6697. -q mesg | quit = mesg Quit with message mesg when shutting down. -r real | real = real Set realname to real. The default realname is the same as the nickname. -t path | trust = path Trust the certificate loaded from path. Server name verification is disabled. See "Connecting to Servers with Self-signed Certificates". -u user | user = user Set username to user. The default username is the same as the nickname. -w pass | pass = pass Log in with the server password pass. -y mesg | away = mesg Set away status to mesg when no clients are connected and no other away status has been set. Other Options -g path Generate a TLS client certificate using openssl(1) and write it to path. The certificate is signed by the certificate authority if -A is set, otherwise it is self-signed. -o Print the server certificate chain to standard output in PEM format and exit. -v | verbose Log IRC messages to standard output: << from pounce to the server >> from the server to pounce -> from clients to pounce <- from pounce to clients -x Prompt for a password and output a hash for use with local-pass. Client Configuration Clients should be configured to connect to the host and port set by local-host and local-port, with TLS or SSL enabled. If local-pass is used, clients must send a server password. If local-ca is used, clients must connect with a client certificate and may request SASL EXTERNAL. If both are used, clients may authenticate with either method. Clients must register with unique usernames (not nicknames), for example the name of the client software or location from which it is connecting. New clients with the same username are assumed to be reconnections and will cause previous connections to stop receiving messages. The nickname and real name sent by clients are ignored. Normally a client sending QUIT will simply be disconnected from pounce. If, however, the quit message starts with the keyword $pounce, pounce it- self will quit. The remainder of the message following the keyword will be used as pounce's quit message, or the default set by quit if there isn't any. Clients which request the causal.agency/passive capability or with user- names beginning with hyphen `-' are considered passive and do not affect automatic away status. Pass-through of the following IRCv3 capabilities is supported: account-notify, account-tag, away-notify, batch, cap-notify, chghost, echo-message, extended-join, invite-notify, labeled-response, message-tags, multi-prefix, server-time, setname, userhost-in-names. Private messages and notices sent to the user's own nickname are relayed only to other clients, not to the server. Generating Client Certificates 1. Generate self-signed client certificates and private keys: $ pounce -g client1.pem $ pounce -g client2.pem 2. Concatenate the certificate public keys into a CA file: $ openssl x509 -subject -in client1.pem \ >> ~/.config/pounce/auth.pem $ openssl x509 -subject -in client2.pem \ >> ~/.config/pounce/auth.pem 3. Configure pounce to verify client certificates against the CA file: local-ca = auth.pem # or: $ pounce -A auth.pem Alternatively, client certificates can be signed by a generated certificate authority: 1. Generate a self-signed certificate authority: $ pounce -g auth.pem 2. Generate and sign client certificates using the CA: $ pounce -A auth.pem -g client1.pem $ pounce -A auth.pem -g client2.pem 3. Since only the public key is needed for certificate verification, ex- tract it from the CA: $ openssl x509 -in auth.pem -out ~/.config/pounce/auth.crt 4. Configure pounce to verify client certificates against the CA: local-ca = auth.crt # or: $ pounce -A auth.crt Configuring CertFP 1. Generate a new TLS client certificate: $ pounce -g ~/.config/pounce/example.pem 2. Connect to the server using the certificate: client-cert = example.pem # or: $ pounce -c example.pem 3. Identify with services or use sasl-plain, then add the certificate fingerprint to your account: /msg NickServ CERT ADD 4. Enable SASL EXTERNAL to require successful authentication when con- necting: client-cert = example.pem sasl-external # or: $ pounce -e -c example.pem Connecting to Servers with Self-signed Certificates 1. Connect to the server and write its certificate to a file: $ pounce -o -h irc.example.org > ~/.config/pounce/example.pem 2. Configure pounce to trust the certificate: trust = example.pem # or: $ pounce -t example.pem ENVIRONMENT USER The default nickname. FILES $XDG_CONFIG_DIRS/pounce Configuration files, certificates and private keys are searched for first in $XDG_CONFIG_HOME, usually ~/.config, followed by the colon-separated list of paths $XDG_CONFIG_DIRS, usually /etc/xdg. ~/.config/pounce The most likely location of configuration files. $XDG_DATA_DIRS/pounce Save files are searched for first in $XDG_DATA_HOME, usually ~/.local/share, followed by the colon-separated list of paths $XDG_DATA_DIRS, usually /usr/local/share:/usr/share. New save files are created in $XDG_DATA_HOME. ~/.local/share/pounce The most likely location of save files. EXAMPLES Start pounce: $ pounce -H irc.example.org -h irc.tilde.chat -j '#ascii.town' Write an equivalent configuration file to ~/.config/pounce/tilde.conf: local-host = irc.example.org host = irc.tilde.chat join = #ascii.town Load the configuration file: $ pounce tilde.conf Add a certificate to acme-client.conf(5): domain irc.example.org { domain key "/home/user/.config/pounce/irc.example.org.key" domain full chain certificate \ "/home/user/.config/pounce/irc.example.org.pem" sign with letsencrypt } Obtain the certificate and make the private key readable by pounce: # acme-client irc.example.org # chown user /home/user/.config/pounce/irc.example.org.key Renew and reload the certificate with a cron(8) job: ~ * * * * acme-client irc.example.org && pkill -USR1 pounce DIAGNOSTICS Upon receiving the SIGINFO signal, pounce prints the current producer posi- tion and the positions of each consumer identified by username. Following each consumer position is the number by which it trails the producer. On systems lacking SIGINFO, SIGUSR2 is used. If a client reconnects after having missed more messages than the size of the buffer, pounce will print a warning: consumer name dropped n messages The size of the buffer can be adjusted with -s. SEE ALSO calico(1) STANDARDS Waldo Bastian, Ryan Lortie, and Lennart Poettering, XDG Base Directory Specification, https://specifications.freedesktop.org/basedir-spec/basedir- spec-latest.html, November 24, 2010. Kyle Fuller, Stephan Kochen, Alexey Sokolov, and James Wheare, server-time Extension, IRCv3 Working Group, https://ircv3.net/specs/extensions/server- time. Lee Hardy, Perry Lorier, Kevin L. Mitchell, Attila Molnar, Daniel Oakley, William Pitcock, and James Wheare, IRCv3 Client Capability Negotiation, IRCv3 Working Group, https://ircv3.net/specs/core/capability-negotiation. S. Josefsson, The Base16, Base32, and Base64 Data Encodings, IETF, RFC 4648, https://tools.ietf.org/html/rfc4648, October 2006. C. Kalt, Internet Relay Chat: Client Protocol, IETF, RFC 2812, https://tools.ietf.org/html/rfc2812, April 2000. Attila Molnar and James Wheare, IRCv3 Strict Transport Security, IRCv3 Working Group, https://ircv3.net/specs/extensions/sts. Attila Molnar and William Pitcock, IRCv3.2 SASL Authentication, IRCv3 Work- ing Group, https://ircv3.net/specs/extensions/sasl-3.2. K. Zeilenga, Ed., The PLAIN Simple Authentication and Security Layer (SASL) Mechanism, IETF, RFC 4616, https://tools.ietf.org/html/rfc4616, August 2006. Extensions The causal.agency/consumer vendor-specific IRCv3 capability enables the causal.agency/pos message tag. The value of this tag is a 64-bit unsigned integer indicating the consumer position of the client after receiving each message, e.g. `@causal.agency/pos=42069'. This capability may be requested with the value of the last causal.agency/pos tag received by the client, e.g. `CAP REQ causal.agency/consumer=42069', setting its consumer position. By persisting this value across connections, a client can ensure no mes- sages are missed, even in case of network issues or application crashes. IRCv3 Client Capability Negotiation specifies that capabilities MAY have values in `CAP LS' or `CAP NEW' responses. It does not, however, indicate if `CAP REQ' capabilities MUST NOT have values. The pounce implementation parses `CAP REQ' values in the same way as `CAP LS' values. The causal.agency/passive vendor-specific IRCv3 capability indicates that a client should not affect the automatic away status. AUTHORS June McEnroe <june@causal.agency> BUGS Send mail to <list+pounce@causal.agency> or join #ascii.town on irc.tilde.chat. A client will sometimes receive its own message, causing it to be displayed twice. This happens when a message is sent while responses are not yet consumed. FreeBSD ports 15.quarterly October 30, 2022 POUNCE(1)
NAME | SYNOPSIS | DESCRIPTION | ENVIRONMENT | FILES | EXAMPLES | DIAGNOSTICS | SEE ALSO | STANDARDS | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=pounce&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>