FreeBSD Manual Pages
RCS(1) General Commands Manual RCS(1) NAME rcs - change RCS file attributes SYNOPSIS rcs options file ... DESCRIPTION rcs creates new RCS files or changes attributes of existing ones. An RCS file contains multiple revisions of text, an access list, a change log, de- scriptive text, and some control attributes. For rcs to work, the caller's login name must be on the access list, except if the access list is empty, the caller is the owner of the file or the superuser, or the -i option is present. Pathnames matching an RCS suffix denote RCS files; all others denote work- ing files. Names are paired as explained in ci(1). Revision numbers use the syntax described in ci(1). OPTIONS -i Create and initialize a new RCS file, but do not deposit any revi- sion. If the RCS file has no path prefix, try to place it first into the subdirectory ./RCS, and then into the current directory. If the RCS file already exists, print an error message. -alogins Append the login names appearing in the comma-separated list logins to the access list of the RCS file. -Aoldfile Append the access list of oldfile to the access list of the RCS file. -e[logins] Erase the login names appearing in the comma-separated list logins from the access list of the RCS file. If logins is omitted, erase the entire access list. -b[rev] Set the default branch to rev. If rev is omitted, the default branch is reset to the (dynamically) highest branch on the trunk. -cstring Set the comment leader to string. An initial ci, or an rcs -i with- out -c, guesses the comment leader from the suffix of the working filename. This option is obsolescent, since RCS normally uses the preceding $Log$ line's prefix when inserting log lines during checkout (see co(1)). However, older versions of RCS use the comment leader in- stead of the $Log$ line's prefix, so if you plan to access a file with both old and new versions of RCS, make sure its comment leader matches its $Log$ line prefix. -ksubst Set the default keyword substitution to subst. The effect of key- word substitution is described in co(1). Giving an explicit -k op- tion to co, rcsdiff, and rcsmerge overrides this default. Beware rcs -kv, because -kv is incompatible with co -l. Use rcs -kkv to restore the normal default keyword substitution. -l[rev] Lock the revision with number rev. If a branch is given, lock the latest revision on that branch. If rev is omitted, lock the latest revision on the default branch. Locking prevents overlapping changes. If someone else already holds the lock, the lock is broken as with rcs -u (see below). -u[rev] Unlock the revision with number rev. If a branch is given, unlock the latest revision on that branch. If rev is omitted, remove the latest lock held by the caller. Normally, only the locker of a re- vision can unlock it. Somebody else unlocking a revision breaks the lock. This causes a mail message to be sent to the original locker. The message contains a commentary solicited from the breaker. The commentary is terminated by end-of-file or by a line containing . by itself. -L Set locking to strict. Strict locking means that the owner of an RCS file is not exempt from locking for checkin. This option should be used for files that are shared. -U Set locking to non-strict. Non-strict locking means that the owner of a file need not lock a revision for checkin. This option should not be used for files that are shared. Whether default locking is strict is determined by your system administrator, but it is nor- mally strict. -mrev:msg Replace revision rev's log message with msg. -M Do not send mail when breaking somebody else's lock. This option is not meant for casual use; it is meant for programs that warn users by other means, and invoke rcs -u only as a low-level lock-breaking operation. -nname[:[rev]] Associate the symbolic name name with the branch or revision rev. Delete the symbolic name if both : and rev are omitted; otherwise, print an error message if name is already associated with another number. If rev is symbolic, it is expanded before association. A rev consisting of a branch number followed by a . stands for the current latest revision in the branch. A : with an empty rev stands for the current latest revision on the default branch, normally the trunk. For example, rcs -nname: RCS/* associates name with the cur- rent latest revision of all the named RCS files; this contrasts with rcs -nname:$ RCS/* which associates name with the revision numbers extracted from keyword strings in the corresponding working files. -Nname[:[rev]] Act like -n, except override any previous assignment of name. -orange deletes ("outdates") the revisions given by range. A range consist- ing of a single revision number means that revision. A range con- sisting of a branch number means the latest revision on that branch. A range of the form rev1:rev2 means revisions rev1 to rev2 on the same branch, :rev means from the beginning of the branch containing rev up to and including rev, and rev: means from revision rev to the end of the branch containing rev. None of the outdated revisions can have branches or locks. -q Run quietly; do not print diagnostics. -I Run interactively, even if the standard input is not a terminal. -sstate[:rev] Set the state attribute of the revision rev to state. If rev is a branch number, assume the latest revision on that branch. If rev is omitted, assume the latest revision on the default branch. Any identifier is acceptable for state. A useful set of states is Exp (for experimental), Stab (for stable), and Rel (for released). By default, ci(1) sets the state of a revision to Exp. -t[file] Write descriptive text from the contents of the named file into the RCS file, deleting the existing text. The file pathname cannot be- gin with -. If file is omitted, obtain the text from standard in- put, terminated by end-of-file or by a line containing . by itself. Prompt for the text if interaction is possible; see -I. With -i, descriptive text is obtained even if -t is not given. -t-string Write descriptive text from the string into the RCS file, deleting the existing text. -T Preserve the modification time on the RCS file unless a revision is removed. This option can suppress extensive recompilation caused by a make(1) dependency of some copy of the working file on the RCS file. Use this option with care; it can suppress recompilation even when it is needed, i.e. when a change to the RCS file would mean a change to keyword strings in the working file. -V Print RCS's version number. -Vn Emulate RCS version n. See co(1) for details. -xsuffixes Use suffixes to characterize RCS files. See ci(1) for details. -zzone Use zone as the default time zone. This option has no effect; it is present for compatibility with other RCS commands. At least one explicit option must be given, to ensure compatibility with future planned extensions to the rcs command. COMPATIBILITY The -brev option generates an RCS file that cannot be parsed by RCS version 3 or earlier. The -ksubst options (except -kkv) generate an RCS file that cannot be parsed by RCS version 4 or earlier. Use rcs -Vn to make an RCS file acceptable to RCS version n by discarding information that would confuse version n. RCS version 5.5 and earlier does not support the -x option, and requires a ,v suffix on an RCS pathname. FILES rcs accesses files much as ci(1) does, except that it uses the effective user for all accesses, it does not write the working file or its directory, and it does not even read the working file unless a revision number of $ is specified. ENVIRONMENT RCSINIT options prepended to the argument list, separated by spaces. See ci(1) for details. DIAGNOSTICS The RCS pathname and the revisions outdated are written to the diagnostic output. The exit status is zero if and only if all operations were suc- cessful. IDENTIFICATION Author: Walter F. Tichy. Manual Page Revision: 5.13; Release Date: 1995/06/05. Copyright (C) 1982, 1988, 1989 Walter F. Tichy. Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995 Paul Eggert. SEE ALSO rcsintro(1), co(1), ci(1), ident(1), rcsclean(1), rcsdiff(1), rcsmerge(1), rlog(1), rcsfile(5) Walter F. Tichy, RCS--A System for Version Control, Software--Practice & Experience 15, 7 (July 1985), 637-654. BUGS A catastrophe (e.g. a system crash) can cause RCS to leave behind a sema- phore file that causes later invocations of RCS to claim that the RCS file is in use. To fix this, remove the semaphore file. A semaphore file's name typically begins with , or ends with _. The separator for revision ranges in the -o option used to be - instead of :, but this leads to confusion when symbolic names contain -. For back- wards compatibility rcs -o still supports the old - separator, but it warns about this obsolete use. Symbolic names need not refer to existing revisions or branches. For exam- ple, the -o option does not remove symbolic names for the outdated revi- sions; you must use -n to remove the names. GNU 1995/06/05 RCS(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMPATIBILITY | FILES | ENVIRONMENT | DIAGNOSTICS | IDENTIFICATION | SEE ALSO | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rcs&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>