FreeBSD Manual Pages
ref-cache(1) Bioinformatics tools ref-cache(1) NAME ref-cache - CRAM reference caching proxy SYNOPSIS ref-cache [-bLUv] [-l LOG_DIR] [-u URL] -d CACHE_DIR -p PORT DESCRIPTION ref-cache is a caching proxy for reference sequences, for use when encoding and decoding CRAM format sequence alignment files. CRAM can use reference based compression where individual bases in aligned records are compared against a known reference sequence, storing only the bases that differ. This gives better compression, but requires the refer- ence sequence to be supplied from an external source. One way to get these sequences is by querying a server implementing the GA4GH refget standard <https://ga4gh.github.io/refget/>, however this can lead to excessive net- work traffic and server load if, as is often the case, the same reference is needed more than once. ref-cache makes reference handling easier by keeping copies of downloaded files, allowing them to be reused when they are needed again. As it has been specifically designed to serve reference sequences for CRAM encoders and decoders, ref-cache behaves rather differently to general-pur- pose caching web proxies: * It only makes requests to a single upstream server. * Sequences are requested using MD5 checksum identifiers, as stored in the M5 tag in CRAM @SQ header lines. * The requested sequence is returned as a single string in uppercase ASCII text with no line terminators or other formatting characters. * Downloaded sequences are checked to ensure they have the correct MD5 checksum before being stored in the cache. * Cached sequences are never removed. * Cached sequences are stored in a way that allows them to be accessed di- rectly on the filesystem. This can allow the web server to be bypassed in some set-ups (for example where the cache is on a shared drive), al- lowing already-downloaded files to be accessed more efficiently. * When started, ref-cache will test to see if it's already running on the specified port, and exits silently if it finds that it is. This enables a simple way of ensuring the server is up, by trying to restart it every few minutes. QUICK-START GUIDE Create directories for the cache and (optionally) log files. Then start up the server in the background, listening on port 8080 and with the EBI's CRAM reference server as the upstream source. mkdir cached_refs mkdir logs ref-cache -b -d cached_refs -l logs -p 8080 -u https://www.ebi.ac.uk/ena/cram/md5/ To make SAMtools and HTSlib use the server, set its URL in the REF_PATH en- vironment variable (note that colons should be doubled up in the URL, and you should substitute the hostname of your actual server). REF_PATH='http:://myserver.example.com::8080/%s' export REF_PATH If the cache directory can be made visible to SAMtools/HTSlib processes, it can also be added directly to REF_PATH by putting it before the web server URL. It is necessary to use the full path to the directory, followed by "/%2s/%2s/%s" for the file location due to the way they are stored inside the cache. REF_PATH='/path/to/cache/%2s/%2s/%s:http:://myserver.example.com::8080/%s' export REF_PATH This is useful as accessing the files directly is more efficient than using http. Files are downloaded to a temporary name and then renamed after val- idation so processes directly using the cache will never try to use a partly downloaded file. By putting the URL at the end, the web server will pick up any requests for references not already in the cache, download them, provide them to the requester, and store them in the cache. OPTIONS -b Run in the background as a System V-style daemon. This option must not be used with -s. -d <dir> Directory where cached files will be stored -h Show help -l <dir> Directory for log files. If not set and running in the fore- ground, logs will be sent to stdout -L Don't log -m all|default|localhost|<network-list> Reply to connections from the listed network(s). This option can be given more than once, with the final allow list being the union of all listed networks along with localhost (which is al- ways enabled). See CLIENT ADDRESS CHECKING below. -n <1-4> Number of server processes to run -p <port> Port number to listen on -r <num> Number of request log files to keep -R <num> Maximum size of a request log file (MiB) -s Run as a systemd-style socket service. As the service manager handles socket allocation, the -p option is ignored when running in this mode. This option must not be used with -b. -u <url> URL of the upstream server. If not set or overridden using -U, the EBI's server (https://www.ebi.ac.uk/ena/cram/md5/) will be used. -U Do not attempt to get files from an upstream server. Only files already in the local cache will be served. -v Turn on debugging output CLIENT ADDRESS CHECKING ref-cache is designed to serve references to local networks. To ensure that it only responds to the desired clients, it has an allow list of ad- dress ranges that it will talk to. If a connection attempt comes from an IP address not in the allowed set, it will be closed immediately. (N.B.: Rejected clients will see a connection open and immediately close, as it's necessary for connections to be opened for the server to discover the peer address. If you want to drop or reject unwanted requests without opening them, you will need to use your operating system's firewall.) The address ranges can be set using the -m option, which may be used more than once. Networks can be specified either as a comma-separated list of CIDR-format blocks (e.g. 192.0.2.0/24, 2001:db8::/32) or using one of the following synonyms: all Any address (not recommended) default10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 (the private ranges listed in RFC 1918); fc00::/7 (the local IPv6 Unicast address range in RFC 4193); and fe80::/10 (IPv6 link-local addresses) localhost 127.0.0.0/8 and ::1/128 (loop-back addresses) If no -m option is given, the "default" list will be used, as most organi- sations will be using one or more of these internally. This will be over- ridden if any -m option appears, in which case -m default will need to be specified explicitly if you also want to reply to addresses in the IPv4 and IPv6 private ranges. For example: ref-cache -m 192.0.2.0/24 -m default ... ref-cache will always listen to the loop-back address, even if this was not specified. Using -m localhost will limit it to only respond to loop-back requests. AUTHOR Written by Rob Davies from the Wellcome Sanger Institute SEE ALSO samtools(1) Samtools website: <http://www.htslib.org/> CRAM specification: <https://samtools.github.io/hts-specs/CRAMv3.pdf> Refget website: <https://ga4gh.github.io/refget/> htslib-1.23.1 18 March 2026 ref-cache(1)
NAME | SYNOPSIS | DESCRIPTION | QUICK-START GUIDE | OPTIONS | CLIENT ADDRESS CHECKING | AUTHOR | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ref-cache&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>