RGBLINK(5) File Formats Manual RGBLINK(5) NAME rgblink -- linker script file format DESCRIPTION The linker script is a file that allows specifying attributes for sections at link time, and in a centralized manner. There can only be one linker script per invocation of rgblink, but it can be split into several files (using the INCLUDE directive). Basic syntax The linker script syntax is line-based. Each line may have a directive or section name, a comment, both, or neither. Whitespace (space and tab char- acters) is used to separate syntax elements, but is otherwise ignored. Comments begin with a semicolon `;' character, until the end of the line. They are simply ignored. Keywords are composed of letters and digits (but they can't start with a digit); they are all case-insensitive. Numbers can be written in a number of formats. Format type Possible prefixes Accepted characters Decimal none 0123456789 Hexadecimal $, 0x, 0X 0123456789ABCDEF Octal &, 0o, 0O 01234567 Binary %, 0b, 0B 01 Underscores are also accepted in numbers, except at the beginning of one. This can be useful for grouping digits, like `1_234' or `$ff_80'. Strings begin with a double quote, and end at the next (non-escaped) double quote. Strings must not contain literal newline characters. Most of the same character escapes as rgbasm(5) are supported, specifically `\\', `\"', `\n', `\r', `\t', and `\0'. Other backslash escape sequences in rgbasm(5) are only relevant to assembly code and do not apply in linker scripts. Directives Including other files `INCLUDE path' acts as if the contents of the file at path were copy-pasted in place of the INCLUDE directive. path must be a string. Specifying the active bank The active bank can be set by specifying its type (memory region) and number. The possible types are: ROM0, ROMX, VRAM, SRAM, WRAM0, WRAMX, OAM, and HRAM. The bank number can be omitted from the types that only contain a single bank, which are: ROM0, ROMX if -t is passed to rgblink(1), VRAM if -d is passed to rgblink(1), WRAM0, WRAMX if -w is passed to rgblink(1), OAM, and HRAM. (SRAM is the only type that can never have its bank number omitted.) After a bank specification, the "current address" is set to the last value it had for that bank. If the bank has never been active thus far, the "current address" defaults to the beginning of the bank (e.g. $4000 for ROMX sections). Instead of giving a bank number, the keyword FLOATING can be used instead; this sets the type of the subsequent sections without binding them to a particular bank. (If the type only allows a sin- gle bank, e.g. ROM0, then FLOATING is valid but redundant and has no effect.) Since no particular section is active, the "current address" is made floating (as if by a `FLOATING' directive), and ORG is not allowed. Changing the current address A bank must be active for any of these directives to be used. `ORG addr' sets the "current address" to addr. This directive can- not be used to move the address backwards: addr must be greater than or equal to the "current address". `FLOATING' causes all sections between it and the next ORG or bank specification to be placed at addresses automatically determined by rgblink. (It is, however, compatible with ALIGN below.) `ALIGN addr, offset' increases the "current address" until it is aligned to the specified boundary (i.e. the align lowest bits of the address are equal to offset). If offset is omitted, it is im- plied to be 0. For example, if the "current address" is $0007, `ALIGN 8' would set it to $0100, and `ALIGN 8, 10' would set it to $000A. `DS size' increases the "current address" by size. The gap is not allocated, so smaller floating sections can later be placed there. Section placement A section can be placed simply by naming it (with a string). Its bank is set to the active bank, and its address to the "current address". Any con- straints the section already possesses (whether from earlier in the linker script, or from the object files being linked) must be consistent with what the linker script specifies: the section's type must match, the section's bank number (if set) must match the active bank, etc. In particular, if the section has an alignment constraint, the address at which it is placed by the linker script must obey that constraint; otherwise, an error will occur. After a section is placed, the "current address" is increased by the sec- tion's size. This must not increase it past the end of the active memory region. The section must have been defined in the object files being linked, unless the section name is followed by the keyword OPTIONAL. EXAMPLES ; This line contains only a comment ROMX $F ; start a bank "Some functions" ; a section name ALIGN 8 ; a directive "Some \"array\"" WRAMX 2 ; start another bank org $d123 ; another directive "Some variables" SEE ALSO rgbasm(1), rgbasm(5), rgblink(1), rgbfix(1), rgbgfx(1), gbz80(7), rgbds(5), rgbds(7) HISTORY rgblink(1) was originally written by Carsten Sorensen as part of the ASMo- tor package, and was later repackaged in RGBDS by Justin Lloyd. It is now maintained by a number of contributors at https://github.com/gbdev/rgbds. FreeBSD ports 15.quarterly July 20, 2026 RGBLINK(5)
NAME | DESCRIPTION | EXAMPLES | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=rgblink&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>