FreeBSD Manual Pages
samtools-checksum(1) Bioinformatics tools samtools-checksum(1) NAME samtools checksum - produces checksums of SAM / BAM / CRAM content SYNOPSIS samtools checksum [options] in.sam|in.bam|in.cram|in.fastq [ ... ] samtools checksum -m [options] in.checksum [ ... ] DESCRIPTION With no options, this produces an order agnostic checksum of sequence, quality, read-name and barcode related aux data in a SAM, BAM, CRAM or FASTQ file. The CRC32 checksum is used, combined together in a multiplica- tive prime field of size (2<<31)-1. The purpose of this mode is to validate that no data has been lost in data processing through the various steps of alignment, sorting and processing. Only primary alignments are recorded and the checksums computed are order agnostic so the same checksums are produced in name collated or position sorted output files. One set of checksums is produced per read-group as well as a combined file, plus a set for records that have no read-group assigned. This allows for validation of merging multiple runs and splitting pools by their read- group. The checksums are also reported for QC-pass only and QC-fail only (indicated by the QCFAIL BAM flag), so checksums of data identified and re- moved as contamination can also be tracked. All of the above are compatible with Biobambam2's bamseqchksum tool, which was the inspiration for this samtools command. The -B option further en- hances compatibility by using the same output format, although it limits the functionality to the order agnostic checksums and fewer types vali- dated. The -m or --merge option can be used to merge previously generated check- sums. The input filenames are checksum outputs from this tool (via shell redirection or the -o) option. The intended use of this is to validate no data is lost or corruption during file merging of read-group specific files, by algorithmically computing the expected checksum output. Additionally checksum can track other columns including BAM flags, mapping information (MAPQ and CIGAR), pair information (RNEXT, PNEXT and TLEN), as well as a wider list of tags. With the -O option the checksums become record order specific. Combined together with the -a option this can be used to validate SAM, BAM and CRAM format conversions. The CRCs per record are XORed with a record counter for the Nth record per read group. See the detailed description below for single -O vs double and the implications on reordering between read-groups. When performing such validation, it is also useful to enable data sanitisa- tion first, as CRAM can fix up certain types of inconsistencies including common issues such as MAPQ and CIGAR strings for unaligned data. OUTPUT The output format consists of a machine readable table of checksums and hu- man readable text starting with a "#" character. For compatibility with bamseqchksum the data is CRCed in specific orders before combining together to form a checksum column. The last column re- ported is then the combination of all checksums in that row, permitting easy comparison by looking at a single value. The columns reported are as follows. Group The read group name. There is always an "all" group which represents all records. This is followed by one checksum set per read-group found in the file. QC This is either "all" or "pass". "Pass" refers to records that do not have the QCFAIL BAM flag specified. flag+seq The checksum of SAM FLAG + SEQ fields +name The checksum of SAM QNAME + FLAG + SEQ fields +qual The checksum of SAM FLAG + SEQ + QUAL fields +aux The checksum of SAM FLAG + SEQ + selected auxiliary fields +chr/pos The checksum of SAM FLAG + SEQ + RNAME (chromosome) + POSi- tion fields +mate The checksum of SAM FLAG + SEQ + RNEXT + PNEXT + ISIZE fields. combined The combined checksum of all columns prior to this column. The first row will be for all alignments, so the combined checksum on the first row may be used as a whole file com- bined checksum. An example output can be seen below. # Checksum for file: NA12892.chrom20.ILLUMINA.bwa.CEU.high_coverage.bam # Aux tags: BC,FI,QT,RT,TC # BAM flags: PAIRED,READ1,READ2 # Group QC count flag+seq +name +qual +aux combined all all 42890086 71169bbb 633fd9f7 2a2e693f 71169bbb 09d03ed4 SRR010946 all 262249 2957df86 3b6dcbc9 66be71f7 2957df86 58e89c25 SRR002165 all 97846 47ff17e0 6ff8fc7b 58366bf5 47ff17e0 796eecb0 [...cut...] OPTIONS -@ COUNT Uses COUNT compute threads in decoding the file. Typically this does not gain much speed beyond 2 or 3. The default is to use a single thread. -B, --bamseqchksum Produces a report compatible with biobambam2's bamseqchksum de- fault output. Note this is only expected to work if no other for- mat options have been enabled. Specifically the header line is not updated to reflect additional columns if requested. Bamseqchksum has more output modes and many alternative check- sums. We only support the default CRC32 method. -F FLAG, --exclude-flags FLAG Specifies which alignment FLAGs to filter out. This defaults to secondary and supplementary alignments (0x900) as these can be duplicates of the primary alignment. This ensures the same num- ber of records are checksummed in unaligned and aligned files. -f FLAG, --require-flags FLAG A list of FLAGs that are required. Defaults to zero. An example use of this may be to checksum QCFAIL only. -b FLAG, --flag-mask FLAG The BAM FLAG is masked first before checksumming. The unaligned flags will contain data about the sequencing run - whether it is paired in sequencing and if so whether this is READ1 or READ2. These flags will not change post-alignment and so everything ex- cept these three are masked out. FLAG defaults to PAIRED,READ1,READ2 (0xc1). -c, --no-rev-comp By default the sequence and quality strings are reverse comple- mented before checksumming, so unaligned data does not affect the checksums. This option disables this and checksums as-is. -t STR, --tags STR Specifies a comma-separated list of aux tags to checksum. These are concatenated together in their canonical BAM encoding in the order listed in STR, prior to computing the checksums. If STR begins with "*" then all tags are used. This can then be followed by a comma separated list of tags to exclude. For exam- ple "*,MD,NM" is all tags except MD and NM. In this mode, the tags are combined in alphanumeric order. The default value is "BC,FI,QT,RT,TC". -O, --in-order By default the CRCs are combined in a multiplicative field that is order agnostic, as multiplication is an associative operation. This option XORs the CRC with the a number indicating the Nth record number for this grouping prior to the multiply step, mak- ing the final multiplicative checksum dependent on the order of the input data. For the "all" row the count is taken from the Nth record in the read-group associated with this record (or the "-" row for read- group-less data). This ensures that the checksums can be subse- quently merged together algorithmically using the -m option, but it does mean there is no validation of record swaps between read- groups. Note however due to the way ties are resolved, when run- ning samtools merge out.bam rg1.bam rg2.bam we may get different orderings if we merged the two files in the opposite order. This can happen when two read-groups have alignments at the same posi- tion with the same BAM flags. Hence if we wish to check a sam- tools split followed by samtools merge round trip works then this counter per readgroup is a benefit. However, if absolute ordering needs to be validated regardless of read-groups, specifying the -O option twice will compute the "all" row by combining the CRC with the Nth record in the file rather than the Nth record in its readgroup. This output can no longer can merged using checksum -m. -P, --check-pos Adds a column to the output with combined chromosome and position checksums. This also incorporates the flag/sequence CRC. -C, --check-cigar Adds a column to the output with combined mapping quality and CIGAR checksums. This also incorporates the flag/sequence CRC. -M, --check-mate Adds a column to the output with combined mate reference, mate position and template length checksums. This also incorporates the flag/sequence CRC. -b FLAGS, --sanitize FLAGS Perform data sanitization prior to checksumming. This is off by default. See samtools view for the FLAG terms accepted. -N COUNT, --count COUNT Limits the checksumming to the first COUNT records from the file. -a, --all Checksum all data. This is equivalent to -PCMOc -b 0xfff -f0 -F0 -z all,cigarx -t *,cF,MD,NM. It is useful for validating round- trips between file formats, such as BAM to CRAM. -T, --tabs Use tabs for separating columns instead of aligned spaces. -q, --show-qc Also show QC pass and fail rows per read-group. These are based on the QCFAIL BAM flag. -o FILE, --output FILE Output checksum report to FILE instead of stdout. -m FILE, --merge FILE... Merge checksum outputs produced by the -o option. This can be used to simulate or validate the effect of computing checksum on the output of a samtools merge command. The columns to report are read from the "# Group" line. The rows to report are still governed by the -q, -v and -T options so this can also be used for reformatting of a single file. Note the "all" row merging cannot be done when the two levels of order-specific checksums (-OO) has been used. -v, --verbose Increase verbosity. At level 1 or higher this also shows rows that have zero count values, which can aid machine parsing. EXAMPLES o To check that an aligned and position sorted file contains the same data as the pre-alignment FASTQ: samtools checksum -q pos-aln.bam samtools import -u -1 rg1.fastq.gz -2 rg2.fastq.gz | samtools checksum -q The output for this consists of some human readable comments starting with "#" and a series of checksum lines per read-group and QC status. # Checksum for file: SRR554369.P_aeruginosa.cram # Aux tags: BC,FI,QT,RT,TC # BAM flags: PAIRED,READ1,READ2 # Group QC count flag+seq +name +qual +aux combined all all 3315742 4a812bf2 22d15cfe 507f0f57 4a812bf2 035e2f5b all pass 3315742 4a812bf2 22d15cfe 507f0f57 4a812bf2 035e2f5b Note as no barcode tags exist, the "+aux" column is the same as the "flag+seq" column it is based upon. o To check round-tripping from BAM to CRAM and back again we can convert the BAM to CRAM and then run the checksum on the CRAM file. This does not need explicitly converting back to BAM as htslib will decode the CRAM and convert it back to the same in-memory representation that is utilised in BAM. samtools checksum -a 9827_2#49.1m.bam [...cut...] samtools view -@8 -C -T $HREF 9827_2#49.1m.bam | samtools checksum -a # Checksum for file: - # Aux tags: *,cF,MD,NM # BAM flags: PAIRED,PROPER_PAIR,UNMAP,MUNMAP,REVERSE,MREVERSE,READ1,READ2,SECONDARY,QCFAIL,DUP,SUPPLEMENTARY # Group QC count flag+seq +name +qual +aux +chr/pos +cigar +mate combined all all 99890 066a0706 0805371d 5506e19f 6b0eec58 60e2347c 09a2c3ba 347a3214 66c5e2de 1#49 all 99890 066a0706 0805371d 5506e19f 6b0eec58 60e2347c 09a2c3ba 347a3214 66c5e2de o To validate that splitting a file by regroup retains all the data, we can compute checksums on the split BAMs and merge the checksum reports to- gether to compare against the original unsplit file. (Note in the exam- ple below diff will report the filename changing, which is expected.) samtools split -u /tmp/split/noRG.bam -f '/tmp/split/%!.%.' in.cram samtools checksum -a in.cram -o in.chksum s=$(for i in /tmp/split/*.bam;do echo "<(samtools checksum -a $i)";done) eval samtools checksum -m $s -o split.chksum diff in.chksum split.chksum AUTHOR Written by James Bonfield from the Sanger Institute. Inspired by bamseqchksum, written by David Jackson of Sanger Institute and amended by German Tischler. SEE ALSO samtools(1), samtools-view(1), Samtools website: <http://www.htslib.org/> samtools-1.23.1 18 March 2026 samtools-checksum(1)
NAME | SYNOPSIS | DESCRIPTION | OUTPUT | OPTIONS | EXAMPLES | AUTHOR | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=samtools-checksum&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>