Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-sm3600(5)		  SANE Scanner Access Now Easy		  sane-sm3600(5)

NAME
     sane-sm3600 - SANE backend for Microtek scanners with M011 USB chip

DESCRIPTION
     The sane-sm3600 library implements a SANE (Scanner Access Now Easy) backend
     that provides access to some Microtek scanners with the Toshiba M011 custom
     USB chip.	This backend should be considered alpha.

     There are also backends for Microtek scanners with SCSI command set.  Refer
     to sane-microtek(5) and sane-microtek2(5) for details.

     At  present,  the following scanners are known positively to work with this
     backend:

	    Vendor     Product id:     Remark:
	    --------   --------------  -----------
	    Microtek   ScanMaker 3600  all modes ok
	    Microtek   ScanMaker 3700  reported to work
	    Microtek   ScanMaker 3750  reported to work

     If you own a Microtek scanner with the M011 chip other than the ones listed
     above, it may or may not work with SANE!

FRONTEND OPTIONS
     This backend dynamically enables the options for  the  frontend,  that  are
     supported	by the scanner dependent on the scanning-mode and other options.
     Unsupported options are disabled.

     The following options are supported  by  the  sane-sm3600	backend:  Color,
     grayscale,  halftone  and	lineart  scans.   Also contrast, brightness, and
     gamma correction.

DEVICE NAMES
     This backend does not support device names in a standardized form.

CONFIGURATION
     This backend does not support a configuration file right now.

FILES
     /usr/local/lib/sane/libsane-sm3600.a
	    The static library implementing this backend.

     /usr/local/lib/sane/libsane-sm3600.so
	    The shared library implementing this  backend  (present  on  systems
	    that support dynamic loading).

ENVIRONMENT
     SANE_DEBUG_SM3600
	    If	the  library was compiled with debug support enabled, this envi-
	    ronment variable controls the debug level for this backend.  E.g., a
	    value of 128 requests all debug output to be printed.  Smaller  lev-
	    els  reduce  verbosity. To see error messages on stderr set SANE_DE-
	    BUG_SM3600 to 1.

	    E.g. just say:
	    export SANE_DEBUG_SM3600=5

SEE ALSO
     sane(7), sane-microtek(5), sane-microtek2(5)
     http://sm3600.sourceforge.net

AUTHOR
     Marian Eichholz <eichholz@computer.org>
     Glenn Ramsey <glenn@componic.com>

				   14 Jul 2008			  sane-sm3600(5)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sane-sm3600&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>

home | help