FreeBSD Manual Pages
saned(8) SANE Scanner Access Now Easy saned(8) NAME saned - SANE network daemon SYNOPSIS saned [ -a [ username ] ] [ -u username ] [ -b address ] [ -p port ] [ -l ] [ -D ] [ -o ] [ -d n ] [ -e ] [ -h ] [ -B buffer-size ] DESCRIPTION saned is the SANE (Scanner Access Now Easy) daemon that allows remote clients to access image acquisition devices available on the local host. OPTIONS saned recognises the following options: -a [username], --alone[=username] is equivalent to the combination of -l -D -u username options. How- ever, username is optional and running user will only be set when specified. -u username, --user=username requests that saned drop root privileges and run as the user (and group) associated with username after binding. -b address, --bind=address tells saned to bind to the address given. -p port, --port=port tells saned to listen on the port given. A value of 0 tells saned to pick an unused port. The default is the sane-port (6566). -l, --listen requests that saned run in standalone daemon mode. In this mode, saned will listen for incoming client connections; inetd(8) is not required for saned operations in this mode. -D, --daemonize will request saned to detach from the console and run in the back- ground. -n, --allow-network allows saned to use network scanners. By default this is forbidden to prevent saned from contacting itself. When enabled, the configu- ration of the sane-net(5) backend should not mention the address on which saned is listening. -o, --once requests that saned exits after the first client disconnects. This is useful for debugging. -d n, --debug=n sets the level of saned debug output to n. When compiled with de- bugging enabled, this flag may be followed by a number to request more or less debug info. The larger the number, the more verbose the debug output. E.g., -d128 will request output of all debug info. A level of 0 produces no output at all. The default value is 2. -e, --stderr will divert saned debug output to stderr instead of the syslog de- fault. -B, --buffer-size=buffer-size specifies the size of the read buffer used for communication with the backend in KB. Default value is 1MB. -h, --help displays a short help message. CONFIGURATION The saned.conf configuration file contains both options for the daemon and the access list. data_portrange = min_port - max_port Specify the port range to use for the data connection. Pick a port range between 1024 and 65535; don't pick a too large port range, as it may have performance issues. Use this option if your saned server is sitting behind a firewall. If that firewall is a Linux machine, we strongly recommend using the Netfilter nf_conntrack_sane module instead. data_connect_timeout = timeout Specify the time in milliseconds that saned will wait for a data connection. Without this option, if the data connection is not done before the scanner reaches the end of scan, the scanner will con- tinue to scan past the end and may damage it depending on the back- end. Specify zero to have the old behavior. The default is 4000ms. The access list is a list of host names, IP addresses or IP subnets (CIDR notation) that are permitted to use local SANE devices. IPv6 addresses must be enclosed in brackets, and should always be specified in their compressed form. Connections from localhost are always permitted. Empty lines and lines starting with a hash mark (#) are ignored. A line containing the sin- gle character ``+'' is interpreted to match any hostname. This allows any remote machine to use your scanner and may present a security risk, so this shouldn't be used unless you know what you're doing. A sample configuration file is shown below: # Daemon options data_portrange = 10000 - 10100 # Access list scan-client.somedomain.firm # this is a comment 192.168.0.1 192.168.2.12/29 [::1] [2001:db8:185e::42:12]/64 The case of the host names does not matter, so AHost.COM is considered identical to ahost.com. FILES /etc/hosts.equiv The hosts listed in this file are permitted to access all local SANE devices. Caveat: this file imposes serious security risks and its use is not recommended. /usr/local/etc/sane.d/saned.conf Contains a list of hosts permitted to access local SANE devices (see also description of SANE_CONFIG_DIR below). /usr/local/etc/sane.d/saned.users If this file contains lines of the form user:password:backend access to the listed backends is restricted. A backend may be listed multiple times for different user/password combinations. The server uses MD5 hashing if supported by the client. ENVIRONMENT SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. On *NIX systems, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (".") and then in /usr/local/etc/sane.d. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the ex- plicitly specified directories. For example, setting SANE_CON- FIG_DIR to "/tmp/config:" would result in directories tmp/config, ., and /usr/local/etc/sane.d being searched (in this order). NOTES saned does not provide confidentiality when communicating with clients. If saned is exposed directly on the network, other users may be able to inter- cept scanned images, or learn passwords for connecting to saned, with lit- tle effort. Client systems should connect to saned through a secure tunnel to the server instead. saned is not a trusted program and should not run with root privileges. Refer to /usr/local/share/doc/sane-backends/saned/saned.install.md for de- tails on configuring saned as a service. SEE ALSO sane(7), scanimage(1), xscanimage(1), xcam(1), sane-dll(5), sane-net(5), sane-"backendname"(5), inetd(8), xinetd(8), systemd(1) http://www.penguin-breeder.org/?page=sane-net AUTHOR David Mosberger 29 Sep 2017 saned(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION | FILES | ENVIRONMENT | NOTES | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=saned&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>