SOCKETPIPE(1) General Commands Manual SOCKETPIPE(1) NAME socketpipe - zero overhead remote process plumbing SYNOPSIS socketpipe [-b] [-h host] [-t timeout] [-i { input generation command [args ... ] } ] -l { login command [args ... ] } -r { remote command [args ... ] } [-o { output processing command [args ... ] } ] DESCRIPTION Socketpipe connects over a TCP/IP socket the remote command specified to the local input generation command and/or the local output processing com- mand. At least one of the two local commands must be specified. The input and output of the remote command are appropriately redirected so that the remote command's input will come from the local input generation command and the remote command's output will be sent to the local output processing command. The remote command is executed on the machine accessed through the login command. The socketpipe executable should be available through the execution path in the remote machine. The braces used for delimiting the commands and their arguments should be space-separated and can be nested. This feature allows you to setup complex and efficient topologies of distributed communicating processes. Although the initial socketpipe communication setup is performed through client-server intermediaries such as ssh(1) or rsh(1), the communication channel that socketpipe establishes is a direct socket connection between the local and the remote commands. Without the use of socketpipe, when piping remote data through ssh(1) or rsh(1), each data block is read at the local end by the respective client, is sent to the remote daemon and writ- ten out again to the remote process. The use of socketpipe removes the in- efficiency of the multiple data copies and context switches and can in some cases provide dramatic throughput improvements. On the other hand, the confidentiality and integrity of the data passing through socketpipe's data channel is not protected; socketpipe should therefore be used only within a confined LAN environment. (The authentication process uses the protocol of the underlying login program and is no more or less vulnerable than using the program in isolation; ssh(1) remains secure, rsh(1) continues to be in- secure.) OPTIONS -l { login command [args ... ] } Specify the remote login command (see previous section). Use argu- ments to this command to specify the host and authentication options (e.g. username). The remote login command should accept as further arguments a command and its arguments and execute it on the remote host. The remote login command is used to execute a server instance of socketpipe on the remote host. Typical examples of remote login commands are ssh(1) and rsh(1). -r { remote command [args ... ] } Specify the remote processing command (see previous section). The remote processing command is executed on the remote machine with its input, output, or both redirected for processing to local commands. -i { input generation command [args ... ] } Specify the remote input generation command (see previous section). The output of the input generation command is redirected as input to the remote command. -o { output processing command [args ... ] } Specify the output processing command (see previous section). The output of the remote command is redirected as input to the output processing command. -b Execute the remote login command in batch mode. This option should be used when no interaction is needed for authentication purposes with the remote login command. This is for example the case when user authentication is performed by means of private keys (ssh(1)) or (horror) the .rhosts(5) file (rsh(1)). The option circumvents two problems in OpenSSH_3.5p1 (and possibly also other remote login commands): the setting of our (shared) output to non-blocking I/O and attempts to read from the standard input. The first problem may manifest itself through an error message of the output processing command such as "stdout: Resource temporarily unavailable". The second problem will not allow you to put socketpipe instances in the background, stopping them with a tty input signal (SIGTTIN). The -b option will close the remote login command's standard output and redirect its standard input from /dev/null solving those problems. On the other hand this flag will disable I/O to/from the remote lo- gin command and may therefore interfere with any interaction re- quired for the authentication process. -h hostSpecify the name or address of the local host. The specified string is used by the remote host to connect back to the originating local host. If this option is not set, the local host address with re- spect to the remote host is obtained automatically by opening a con- nection to the remote host and looking at the SSH_CLIENT environment variable. Setting this option may be required when the connection to the remote host is not done via ssh or if an alternative routing path is preferred. -t timeout Specify the time for which the server side will wait for the client to connect. By default this value is zero, which means that the server side will wait forever. Smaller values are useful for de- tecting a connection problem (e.g. due to incoming connection fire- wall rules) and exiting with an error. EXAMPLE socketpipe -b -i { tar cf - / } -l { ssh remotehost } -r { dd of=/dev/st0 bs=32k } Backup the local host on a tape drive located on remotehost. socketpipe -b -l { ssh remotehost } -r { dd if=/dev/st0 bs=32k } -o { tar xpf - /home/luser } Restore a directory using the tape drive on the remote host. socketpipe -b -i { tar cf - / } -l { ssh remotehost } -r { bzip2 -c } -o { dd of=/dev/st0 bs=32k } Backup the local disk on a local tape, compressing the data on the (presum- ably a lot more powerful) remotehost. SEE ALSO tcpcat(1), zsh(1) AUTHOR Diomidis Spinellis -- <http://www.spinellis.gr> BUGS The sockets used to connect the local and remote commands may read or write only parts of the data specified in a read(2) or write(2) operation. Al- though this is standard behavior, and is for example correctly handled by the stdio(3) library, some commands may not expect it and may exhibit strange bugs. Most examples in Stevens's "Advanced Programming in the UNIX Environment" (Addison-Wesley 1992) would fail reading from sockets; on the other hand Section 6.6 of Stevens's "UNIX Network Programming" (Prentice Hall 1990) provides code that deals with this problem. 5 July 2015 SOCKETPIPE(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLE | SEE ALSO | AUTHOR | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=socketpipe&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>