Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
srec_info(1)		     General Commands Manual		    srec_info(1)

NAME
     srec_info - information about EPROM load files

SYNOPSIS
     srec_info [ option...  ] filename...
     srec_info -Help
     srec_info -VERSion

DESCRIPTION
     The  srec_info  program is used to obtain input about EPROM load files.  It
     reads the files specified, and then presents statistics about them.   These
     statistics  include: the file header if any, the execution start address if
     any, and the address ranges covered by the data if any.

     If there is binary data the header, it will be presented using the URL  en-
     coding  that  uses  % followed by two hexadeimal characters.  For example a
     backspace would be encoded as "%08".  (This is symmetric with the	srec_cat
     --header opion).

INPUT FILE SPECIFICATIONS
     Input  may  be qualified in two ways: you may specify a data file or a data
     generator.  format and you may specify filters to apply to them.  An  input
     file specification looks like this:
	    data-file [ filter ... ]
	    data-generator [ filter ... ]

   Data Files
     Input  from data files is specified by file name and format name.	An input
     file specification looks like this:
	    filename [ format ][ -ignore-checksums ]
     The default format is Motorola S-Record format, but many  others  are  also
     understood.

   Data Generators
     It is also possible to generate data, rather than read it from a file.  You
     may  use  a  generator  anywhere  you could use a file.  An input generator
     specification looks like this:
	    -GENerate address-range -data-source
     Generators include random data and various forms of constant data.

   Common Manual Page
     See srec_input(1) for complete details of input specifiers.  This	descrip-
     tion  is  in  a  separate manual page because it is common to more than one
     SRecord command.

OPTIONS
     The following options are understood:

     @filename
	     The named text file is read for additional command line  arguments.
	     Arguments	are separated by white space (space, tab, newline, etc).
	     There is no wildcard mechanism.  There  is  no  quoting  mechanism.
	     Comments,	which  start with '#' and extend to the end of the line,
	     are ignored.  Blank lines are ignored.

     -Help
	     Provide some help with using the srec_info program.

     -IGnore_Checksums
	     The -IGnore-Checksums option may be used to disable checksum  vali-
	     dation  of  input	files, for those formats which have checksums at
	     all.  Note that the checksum values are still read  in  and  parsed
	     (so  it is still an error if they are missing) but their values are
	     not checked.  Used after an input file  name,  the  option  affects
	     that file alone; used anywhere else on the command line, it applies
	     to all following files.

     -Enable_Sequence_Warnings
	     This  option may be used to enable warnings about input files where
	     the data records are not in strictly ascending address order.  Only
	     one warning is issued per input file.  This is the default.

	     Note: the output of srec_cat(1) is always in this order.

	     Note: This option must be used before the input file.  This is  be-
	     cause if there are several files on the command line, each may need
	     different	settings.   The  setting remains in force until the next
	     -Disable_Sequence_Warnings option.

     -Disable_Sequence_Warnings
	     This option may be used to disable warnings about input files where
	     the data records are not in strictly ascending address order.

	     Note: This option must be used before  the  offending  input  file.
	     This  is  because	if  there are several files on the command line,
	     each may need different settings.	The setting remains in force un-
	     til the next -Ensable_Sequence_Warnings option.

     -redundant-bytes=value
	     Use this option to permit a file to contain  redundant  values  for
	     some  memory  locations.  The default is for this condition to be a
	     warning.

	     ignore
		 No warning or error is issued whena redundant settings are  de-
		 tected.

	     warning
		 A warning is issued when a redundant settings are observed, the
		 warning includes the problematic address.

	     error
		 A fatal error is issued when a redundant settings are observed,
		 the  fatal  error  message includes the problematic address and
		 byte value.

     -contradictory-bytes=value
	     Use this option to permit a file to  contain  contradictory  values
	     for  some memory locations.  The last value in the input(s) will be
	     used.  The default is for this condition to be a fatal error.

	     ignore
		 No warning or error is issued when contradictory setting is de-
		 tected.

	     warning
		 A warning is issued when a vontradictory settings are observed,
		 the warning includes the problematic address, and values.

	     error
		 A fatal error is issued when  contradictory  settings	are  ob-
		 served,  the  fatal  error message includes the problematic ad-
		 dress and byte values.

     -VERSion
	     Print the version of the srec_info program being executed.

     All other options will produce a diagnostic error.

     All options may be abbreviated; the abbreviation is documented as the upper
     case letters, all lower case letters and underscores (_) are optional.  You
     must use consecutive sequences of optional letters.

     All options are case insensitive, you may type them in upper case or  lower
     case or a combination of both, case is not important.

     For  example: the arguments "-help", "-HEL" and "-h" are all interpreted to
     mean the -Help option.  The argument "-hlp" will not be understood, because
     consecutive optional characters were not supplied.

     Options and other command line arguments may be mixed  arbitrarily  on  the
     command line.

     The  GNU  long  option  names  are  understood.  Since all option names for
     srec_info are long, this means ignoring the extra leading "-".  The  "--op-
     tion=value" convention is also understood.

EXIT STATUS
     The  srec_info  command  will  exit  with	a status of 1 on any error.  The
     srec_info command will only exit with a status of 0 if there are no errors.

COPYRIGHT
     srec_info version 1.64
     Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,  2006,  2007,
     2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller

     The  srec_info  program  comes with ABSOLUTELY NO WARRANTY; for details use
     the 'srec_info -VERSion License' command.	This is free  software	and  you
     are  welcome  to  redistribute it under certain conditions; for details use
     the 'srec_info -VERSion License' command.

MAINTAINER
     Scott Finneran   E-Mail:	scottfinneran@yahoo.com.au
     Peter Miller     E-Mail:	pmiller@opensource.org.au

Reference Manual		     SRecord			    srec_info(1)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=srec_info&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>

home | help