FreeBSD Manual Pages
SSSD-IPA(5) File Formats and Conventions SSSD-IPA(5) NAME sssd-ipa - SSSD IPA provider DESCRIPTION This manual page describes the configuration of the IPA provider for sssd(8). For a detailed syntax reference, refer to the "FILE FORMAT" sec- tion of the sssd.conf(5) manual page. The IPA provider is a back end used to connect to an IPA server. (Refer to the freeipa.org web site for information about IPA servers.) This provider requires that the machine be joined to the IPA domain; configuration is al- most entirely self-discovered and obtained directly from the server. The IPA provider enables SSSD to use the sssd-ldap(5) identity provider and the sssd-krb5(5) authentication provider with optimizations for IPA envi- ronments. The IPA provider accepts the same options used by the sssd-ldap and sssd-krb5 providers with some exceptions. However, it is neither neces- sary nor recommended to set these options. The IPA provider primarily copies the traditional ldap and krb5 provider default options with some exceptions, the differences are listed in the "MODIFIED DEFAULT OPTIONS" section. As an access provider, the IPA provider has a minimal configuration (see "ipa_access_order") as it mainly uses HBAC (host-based access control) rules. Please refer to freeipa.org for more information about HBAC. If "auth_provider=ipa" or "access_provider=ipa" is configured in sssd.conf then the id_provider must also be set to "ipa". The IPA provider will use the PAC responder if the Kerberos tickets of users from trusted realms contain a PAC. To make configuration easier the PAC responder is started automatically if the IPA ID provider is config- ured. CONFIGURATION OPTIONS Refer to the section "DOMAIN SECTIONS" of the sssd.conf(5) manual page for details on the configuration of an SSSD domain. ipa_domain (string) Specifies the name of the IPA domain. This is optional. If not pro- vided, the configuration domain name is used. ipa_server, ipa_backup_server (string) The comma-separated list of IP addresses or hostnames of the IPA servers to which SSSD should connect in the order of preference. For more information on failover and server redundancy, see the "FAILOVER" section. This is optional if autodiscovery is enabled. For more infor- mation on service discovery, refer to the "SERVICE DISCOVERY" section. ipa_hostname (string) Optional. May be set on machines where the hostname(5) does not reflect the fully qualified name used in the IPA domain to identify this host. The hostname must be fully qualified. dyndns_update (boolean) Optional. This option tells SSSD to automatically update the DNS server built into FreeIPA with the IP address of this client. The update is secured using GSS-TSIG. The IP address of the IPA LDAP connection is used for the updates, if it is not otherwise specified by using the "dyndns_iface" option. NOTE: On older systems (such as RHEL 5), for this behavior to work re- liably, the default Kerberos realm must be set properly in /etc/krb5.conf Default: false dyndns_ttl (integer) The TTL to apply to the client DNS record when updating it. If dyn- dns_update is false this has no effect. This will override the TTL serverside if set by an administrator. Default: 1200 (seconds) dyndns_iface (string) Optional. Applicable only when dyndns_update is true. Choose the inter- face or a list of interfaces whose IP addresses should be used for dy- namic DNS updates. The name of interface can be a wildcard pattern pre- fixed with ! for interface excluding. First match stops the evalua- tion. For example list !eth1, * instruct SSSD to use all interfaces ex- cept eth1. See man 7 glob for details about patterns. Default: Use the IP addresses of the interface which is used for IPA LDAP connection Example: dyndns_iface = em[12], !vnet1, vnet* dyndns_address (string) Optional. Applicable only when dyndns_update is true. A list of IP ad- dresses or IP networks to be used for dynamic DNS updates. Network ad- dresses must be in CIDR format. An entry can be prefixed with ! to in- dicate exclusion. The best match is used to determine whether an ad- dress is included or excluded (i.e., a longer prefix takes precedence). Default: No filtering of IP addresses. Example: dyndns_address = 10.0.0.0/16, !10.0.1.0/24 dyndns_auth (string) Whether the nsupdate utility should use GSS-TSIG authentication for se- cure updates with the DNS server, insecure updates can be sent by set- ting this option to 'none'. Default: GSS-TSIG dyndns_auth_ptr (string) Whether the nsupdate utility should use GSS-TSIG authentication for se- cure PTR updates with the DNS server, insecure updates can be sent by setting this option to 'none'. Default: Same as dyndns_auth dyndns_refresh_interval (integer) How often should the back end perform periodic DNS update in addition to the automatic update performed when the back end goes online. This option is optional and applicable only when dyndns_update is true. Default: 0 (disabled) dyndns_update_ptr (bool) Whether the PTR record should also be explicitly updated when updating the client's DNS records. Applicable only when dyndns_update is true. This option should be False in most IPA deployments as the IPA server generates the PTR records automatically when forward records are changed. Note that dyndns_update_per_family parameter does not apply for PTR record updates. Those updates are always sent separately. Default: False (disabled) dyndns_force_tcp (bool) Whether the nsupdate utility should default to using TCP for communi- cating with the DNS server. Default: False (let nsupdate choose the protocol) dyndns_server (string) The DNS server to use when performing a DNS update. In most setups, it's recommended to leave this option unset. Setting this option makes sense for environments where the DNS server is different from the identity server or when we use encrypted DNS. The parameter can be a simple string containing DNS name or IP address. It can also be an URI. The URI can look like dns://servername/ or dns+tls://1.2.3.4:853#servername/. The second example enables DNS-over-TLS protocol for DNS updates. The nsupdate utility must support DoT - check the man nsupdate before en- abling it in SSSD. Please note that this option will be only used in fallback attempt when previous attempt using autodetected settings failed or when DNS-over-TLS is enabled. Default: None (let nsupdate choose the server) dyndns_update_per_family (boolean) DNS update is by default performed in two steps - IPv4 update and then IPv6 update. In some cases it might be desirable to perform IPv4 and IPv6 update in single step. Default: true dyndns_dot_cacert (string) This option specifies the file of the certificate authorities certifi- cates (in PEM format) in order to verify the remote server TLS certifi- cate when using DoT. Default: None (use global certificate store) dyndns_dot_cert (string) This option sets the certificate(s) file for authentication for the DoT transport to the remote server. The certificate chain file is expected to be in PEM format. The dyndns_dot_cert and dyndns_dot_key options must be both set to achieve mutual TLS authentication. Default: None (Do not use TLS authentication) dyndns_dot_key (string) This option sets the key file for authenticated encryption for the DoT transport to the remote server. The private key file is expected to be in PEM format. Default: None (Do not use TLS authentication) ipa_access_order (string) Comma separated list of access control options. Allowed values are: expire: use IPA's account expiration policy. pwd_expire_policy_reject, pwd_expire_policy_warn, pwd_expire_policy_re- new: These options are useful if users are interested in being warned that password is about to expire and authentication is based on using a different method than passwords - for example SSH keys. The difference between these options is the action taken if user pass- word is expired: * pwd_expire_policy_reject - user is denied to log in, * pwd_expire_policy_warn - user is still able to log in, * pwd_expire_policy_renew - user is prompted to change their password immediately. Please note that 'access_provider = ipa' must be set for this feature to work. ipa_deskprofile_search_base (string) Optional. Use the given string as search base for Desktop Profile re- lated objects. Default: Use base DN ipa_hbac_search_base (string) Optional. Use the given string as search base for HBAC related objects. Default: Use base DN ipa_host_search_base (string) Deprecated. Use ldap_host_search_base instead. ipa_selinux_search_base (string) Optional. Use the given string as search base for SELinux user maps. See "ldap_search_base" for information about configuring multiple search bases. Default: the value of ldap_search_base ipa_subdomains_search_base (string) Optional. Use the given string as search base for trusted domains. See "ldap_search_base" for information about configuring multiple search bases. Default: the value of cn=trusts,%basedn ipa_master_domain_search_base (string) Optional. Use the given string as search base for master domain object. See "ldap_search_base" for information about configuring multiple search bases. Default: the value of cn=ad,cn=etc,%basedn ipa_views_search_base (string) Optional. Use the given string as search base for views containers. See "ldap_search_base" for information about configuring multiple search bases. Default: the value of cn=views,cn=accounts,%basedn krb5_realm (string) The name of the Kerberos realm. This is optional and defaults to the value of "ipa_domain". The name of the Kerberos realm has a special meaning in IPA - it is converted into the base DN to use for performing LDAP operations. krb5_confd_path (string) Absolute path of a directory where SSSD should place Kerberos configu- ration snippets. To disable the creation of the configuration snippets set the parameter to 'none'. Default: not set (krb5.include.d subdirectory of SSSD's pubconf direc- tory) ipa_deskprofile_refresh (integer) The amount of time between lookups of the Desktop Profile rules against the IPA server. This will reduce the latency and load on the IPA server if there are many desktop profiles requests made in a short period. Default: 5 (seconds) ipa_deskprofile_request_interval (integer) The amount of time between lookups of the Desktop Profile rules against the IPA server in case the last request did not return any rule. Default: 60 (minutes) ipa_hbac_refresh (integer) The amount of time between lookups of the HBAC rules against the IPA server. This will reduce the latency and load on the IPA server if there are many access-control requests made in a short period. Default: 5 (seconds) ipa_hbac_selinux (integer) The amount of time between lookups of the SELinux maps against the IPA server. This will reduce the latency and load on the IPA server if there are many user login requests made in a short period. Default: 5 (seconds) ipa_server_mode (boolean) This option will be set by the IPA installer (ipa-server-install) auto- matically and denotes if SSSD is running on an IPA server or not. On an IPA server SSSD will lookup users and groups from trusted domains directly while on a client it will ask an IPA server. NOTE: There are currently some assumptions that must be met when SSSD is running on an IPA server. * The "ipa_server" option must be configured to point to the IPA server itself. This is already the default set by the IPA in- staller, so no manual change is required. * The "full_name_format" option must not be tweaked to only print short names for users from trusted domains. Default: false VIEWS AND OVERRIDES SSSD can handle views and overrides which are offered by FreeIPA 4.1 and later version. Since all paths and objectclasses are fixed on the server side there is basically no need to configure anything. For completeness the related options are listed here with their default values. ipa_view_class (string) Objectclass of the view container. Default: nsContainer ipa_view_name (string) Name of the attribute holding the name of the view. Default: cn ipa_override_object_class (string) Objectclass of the override objects. Default: ipaOverrideAnchor ipa_anchor_uuid (string) Name of the attribute containing the reference to the original object in a remote domain. Default: ipaAnchorUUID ipa_user_override_object_class (string) Name of the objectclass for user overrides. It is used to determine if the found override object is related to a user or a group. User overrides can contain attributes given by * ldap_user_name * ldap_user_uid_number * ldap_user_gid_number * ldap_user_gecos * ldap_user_home_directory * ldap_user_shell * ldap_user_ssh_public_key Default: ipaUserOverride ipa_group_override_object_class (string) Name of the objectclass for group overrides. It is used to determine if the found override object is related to a user or a group. Group overrides can contain attributes given by * ldap_group_name * ldap_group_gid_number Default: ipaGroupOverride MODIFIED DEFAULT OPTIONS Certain option defaults do not match their respective backend provider de- faults, these option names and IPA provider-specific defaults are listed below: KRB5 Provider * krb5_validate = true * krb5_use_fast = try * krb5_canonicalize = true LDAP Provider - General * ldap_schema = ipa_v1 * ldap_force_upper_case_realm = true * ldap_sasl_mech = GSSAPI * ldap_sasl_minssf = 56 * ldap_account_expire_policy = ipa * ldap_use_tokengroups = true LDAP Provider - User options * ldap_user_member_of = memberOf * ldap_user_uuid = ipaUniqueID * ldap_user_ssh_public_key = ipaSshPubKey * ldap_user_auth_type = ipaUserAuthType LDAP Provider - Group options * ldap_group_object_class = ipaUserGroup * ldap_group_object_class_alt = posixGroup * ldap_group_member = member * ldap_group_uuid = ipaUniqueID * ldap_group_objectsid = ipaNTSecurityIdentifier * ldap_group_external_member = ipaExternalMember SUBDOMAINS PROVIDER The IPA subdomains provider behaves slightly differently if it is config- ured explicitly or implicitly. If the option 'subdomains_provider = ipa' is found in the domain section of sssd.conf, the IPA subdomains provider is configured explicitly, and all subdomain requests are sent to the IPA server if necessary. If the option 'subdomains_provider' is not set in the domain section of sssd.conf but there is the option 'id_provider = ipa', the IPA subdomains provider is configured implicitly. In this case, if a subdomain request fails and indicates that the server does not support subdomains, i.e. is not configured for trusts, the IPA subdomains provider is disabled. After an hour or after the IPA provider goes online, the subdomains provider is enabled again. TRUSTED DOMAINS CONFIGURATION Some configuration options can also be set for a trusted domain. A trusted domain configuration can be set using the trusted domain subsection as shown in the example below. Alternatively, the "subdomain_inherit" option can be used in the parent domain. [domain/ipa.domain.com/ad.domain.com] ad_server = dc.ad.domain.com For more details, see the sssd.conf(5) manual page. Different configuration options are tunable for a trusted domain depending on whether you are configuring SSSD on an IPA server or an IPA client. OPTIONS TUNABLE ON IPA MASTERS The following options can be set in a subdomain section on an IPA master: * ad_server * ad_backup_server * ad_site * ipa_server * ipa_backup_server * ldap_search_base * ldap_user_search_base * ldap_group_search_base * use_fully_qualified_names Options prefixed with 'ad_' or 'ipa_' only apply to their respective subdo- main type. OPTIONS TUNABLE ON IPA CLIENTS The following options can be set in an AD subdomain section on an IPA client: * ad_server * ad_site Note that if both options are set, only "ad_server" is evaluated. Since any request for a user or a group identity from a trusted domain triggered from an IPA client is resolved by the IPA server, the "ad_server" and "ad_site" options only affect which AD DC will the authentication be performed against. In particular, the addresses resolved from these lists will be written to "kdcinfo" files read by the Kerberos locator plugin. Please refer to the sssd_krb5_locator_plugin(8) manual page for more de- tails on the Kerberos locator plugin. FAILOVER The failover feature allows back ends to automatically switch to a differ- ent server if the current server fails. Failover Syntax The list of servers is given as a comma-separated list; any number of spaces is allowed around the comma. The servers are listed in order of preference. The list can contain any number of servers. For each failover-enabled config option, two variants exist: primary and backup. The idea is that servers in the primary list are preferred and backup servers are only searched if no primary servers can be reached. If a backup server is selected, a timeout of 31 seconds is set. After this time- out SSSD will periodically try to reconnect to one of the primary servers. If it succeeds, it will replace the current active (backup) server. The Failover Mechanism The failover mechanism distinguishes between a machine and a service. The back end first tries to resolve the hostname of a given machine; if this resolution attempt fails, the machine is considered offline. No further at- tempts are made to connect to this machine for any other service. If the resolution attempt succeeds, the back end tries to connect to a service on this machine. If the service connection attempt fails, then only this par- ticular service is considered offline and the back end automatically switches over to the next service. The machine is still considered online and might still be tried for another service. Further connection attempts are made to machines or services marked as of- fline after a specified period of time; this is currently hard coded to 30 seconds. If there are no more machines to try, the back end as a whole switches to offline mode, and then attempts to reconnect every 30 seconds. Failover time outs and tuning Resolving a server to connect to can be as simple as running a single DNS query or can involve several steps, such as finding the correct site or trying out multiple host names in case some of the configured servers are not reachable. The more complex scenarios can take some time and SSSD needs to balance between providing enough time to finish the resolution process but on the other hand, not trying for too long before falling back to of- fline mode. If the SSSD debug logs show that the server resolution is tim- ing out before a live server is contacted, you can consider changing the time outs. This section lists the available tunables. Please refer to their descrip- tion in the sssd.conf(5), manual page. dns_resolver_server_timeout Time in milliseconds that sets how long would SSSD talk to a single DNS server before trying next one. Default: 1000 dns_resolver_op_timeout Time in seconds to tell how long would SSSD try to resolve single DNS query (e.g. resolution of a hostname or an SRV record) before trying the next hostname or discovery domain. Default: 3 dns_resolver_timeout How long would SSSD try to resolve a failover service. This service resolution internally might include several steps, such as resolving DNS SRV queries or locating the site. Default: 6 For LDAP-based providers, the resolve operation is performed as part of an LDAP connection operation. Therefore, also the "ldap_opt_timeout" timeout should be set to a larger value than "dns_resolver_timeout" which in turn should be set to a larger value than "dns_resolver_op_timeout" which should be larger than "dns_resolver_server_timeout". SERVICE DISCOVERY The service discovery feature allows back ends to automatically find the appropriate servers to connect to using a special DNS query. This feature is not supported for backup servers. Configuration If no servers are specified, the back end automatically uses service dis- covery to try to find a server. Optionally, the user may choose to use both fixed server addresses and service discovery by inserting a special key- word, "_srv_", in the list of servers. The order of preference is main- tained. This feature is useful if, for example, the user prefers to use service discovery whenever possible, and fall back to a specific server when no servers can be discovered using DNS. The domain name Please refer to the "dns_discovery_domain" parameter in the sssd.conf(5) manual page for more details. The protocol The queries usually specify _tcp as the protocol. Exceptions are documented in respective option description. See Also For more information on the service discovery mechanism, refer to RFC 2782. EXAMPLE The following example assumes that SSSD is correctly configured and exam- ple.com is one of the domains in the [sssd] section. This examples shows only the ipa provider-specific options. [domain/example.com] id_provider = ipa ipa_server = ipaserver.example.com ipa_hostname = myhost.example.com SEE ALSO sssd(8), sssd.conf(5), sssd-ldap(5), sssd-ldap-attributes(5), sssd-krb5(5), sssd-simple(5), sssd-ipa(5), sssd-ad(5), sssd-idp(5), sssd-sudo(5), sssd- session-recording(5), sss_cache(8), sss_debuglevel(8), sss_obfuscate(8), sss_seed(8), sssd_krb5_locator_plugin(8), sss_ssh_authorizedkeys(1), sss_ssh_knownhosts(1), sssd-ifp(5), pam_sss(8). sss_rpcidmapd(5) AUTHORS The SSSD upstream - https://github.com/SSSD/sssd/ SSSD 06/11/2026 SSSD-IPA(5)
NAME | DESCRIPTION | CONFIGURATION OPTIONS | MODIFIED DEFAULT OPTIONS | SUBDOMAINS PROVIDER | TRUSTED DOMAINS CONFIGURATION | FAILOVER | SERVICE DISCOVERY | EXAMPLE | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sssd-ipa&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>