STUBBY(1) General Commands Manual STUBBY(1) NAME stubby - a local DNS Privacy stub resolver SYNOPSIS stubby [-C file] [-ghilV] [-v loglevel] DESCRIPTION stubby acts as a local DNS Privacy stub resolver, using DNS-over-TLS. Stubby encrypts DNS queries sent from the local machine to a DNS Privacy resolver, increasing end user privacy. stubby is in the early stages of development but is suitable for techni- cal/advanced users. stubby provides DNS Privacy by running as a daemon that listens on the loopback address for DNS queries, and forwards those queries out over TLS. The default configuration provides Strict Privacy, and uses a subset of available DNS Privacy servers. See https://dnsprivacy.org/wiki/dis- play/DP/DNS+Privacy+Test+Servers OPTIONS -C file Read settings from the configuration file file. If this option is not given, stubby looks for a configuration file at ~/.stubby.yml. If this is not present, stubby falls back to the global configura- tion file /usr/local/etc/stubby/stubby.yml. -g Run stubby as a daemon. -h Print a usage message and exit. -i Read the configuration, validate the contents, pretty-print them to the standard output and exit. -l Enable all logging. Equivalent to -v 7. -v loglevel Enable logging. All logging messages at or below loglevel are printed to standard error: 0: EMERG The system is unusable 1: ALERT Action must be taken immediately 2: CRIT Critical conditions 3: ERROR Error conditions 4: WARN Warning conditions 5: NOTICE Normal, but significant, conditions 6: INFO Information messages 7: DEBUG Debug-level messages -V Print the stubby version and exit. CONFIGURATION The configuration file is in YAML. An example config is: resolution_type: GETDNS_RESOLUTION_STUB dns_transport_list: - GETDNS_TRANSPORT_TLS tls_authentication: GETDNS_AUTHENTICATION_REQUIRED tls_query_padding_blocksize: 256 edns_client_subnet_private : 1 idle_timeout: 10000 listen_addresses: - 127.0.0.1 - 0::1 round_robin_upstreams: 1 upstream_recursive_servers: - address_data: 145.100.185.15 tls_auth_name: "dnsovertls.sinodun.com" tls_pubkey_pinset: - digest: "sha256" value: 62lKu9HsDVbyiPenApnc4sfmSYTHOVfFgL3pyB+cBL4= - address_data: 145.100.185.16 tls_auth_name: "dnsovertls1.sinodun.com" tls_pubkey_pinset: - digest: "sha256" value: cE2ecALeE5B+urJhDrJlVFmf38cJLAvqekONvjvpqUA= - address_data: 185.49.141.37 tls_auth_name: "getdnsapi.net" tls_pubkey_pinset: - digest: "sha256" value: foxZRnIh9gZpWnl+zEiKa0EJ2rdCGroMWm02gaxSc9Q= - address_data: 2001:610:1:40ba:145:100:185:15 tls_auth_name: "dnsovertls.sinodun.com" tls_pubkey_pinset: - digest: "sha256" value: 62lKu9HsDVbyiPenApnc4sfmSYTHOVfFgL3pyB+cBL4= - address_data: 2001:610:1:40ba:145:100:185:16 tls_auth_name: "dnsovertls1.sinodun.com" tls_pubkey_pinset: - digest: "sha256" value: cE2ecALeE5B+urJhDrJlVFmf38cJLAvqekONvjvpqUA= - address_data: 2a04:b900:0:100::38 tls_auth_name: "getdnsapi.net" tls_pubkey_pinset: - digest: "sha256" value: foxZRnIh9gZpWnl+zEiKa0EJ2rdCGroMWm02gaxSc9Q= The configuration items are as follow. Some take constant values from the getdns library underlying stubby and further explanation of their values may be found in the getdns documentation or at http://www.getdnsapi.net resolution_type resolution. This must be set to GETDNS_RESOLUTION_STUB for historic reasons. stubby will exit with an error if any other setting is used. dns_transport_list list Set the list of transport types to be used. For DNS Privacy this must be set to GETDNS_TRANSPORT_TLS. Clear text transports are GETDNS_TRANSPORT_TCP and GETDNS_TRANSPORT_UDP tls_authentication type Set the type of authentication required. For Strict Privacy, this should be set to GETDNS_AUTHENTICATION_REQUIRED. For Opportunistic mode, remove this setting or set to GETDNS_AUTHENTICATION_NONE. In Opportunistic mode authentication of the nameserver is not required and fallback to clear text transports is permitted if they are in dns_transport_list tls_query_padding_blocksize blocksize Use the EDNS0 padding option to pad DNS queries to hide their size. edns_client_subnet_private 0 or 1 If 1, use EDNS0 Client Subnet privacy so the client s ubnet is not sent to authoritative servers. idle_timeout timeout Use an EDNS0 Keepalive idle timeout of timeout milliseconds unless overridden by the server. This keeps idle TLS connections open to avoid the overhead of opening a new connection for every query. round_robin_upstreams 0 or 1 If 1, round robin queries across all the configured upstream servers. Without this option stubby will use each upstream server sequentially until it becomes unavailable and then move on to use the next. upstream_recursive_servers server list Specify the upstream servers that stubby is to use. Each item in the list contains the following items: address_data address IPv4 or IPv6 address of the server. tls_auth_name name This is the authentication domain name that will be verified against the presented certificate. tls_pubkey_pinset pinset The sha256 SPKI pinset for the server. This is also verified against the presented certificate. This contains two items: digest type The type of the key digest. value keyval The key value. FILES ~/.stubby.yml /usr/local/etc/stubby/stubby.yml SEE ALSO https://getdnsapi.net/ https://dnsprivacy.org/wiki/display/DP/DNS+Privacy+Daemon+-+Stubby STUBBY(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION | FILES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=stubby&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>