home | help
sysdata(1)		     General Commands Manual		      sysdata(1)

NAME
     sysdata - find basic hardware system data

SYNOPSIS
     sysdata

DESCRIPTION
     After  the  atlc  package is built, a small benchmark is run as part of the
     testing procedure. This benchmark tries to get some information  about  the
     hardware.	The  program sysdata displays the same hardware information that
     the benchmark will display, but runs in a fraction of a second, whereas the
     benchmark can take from 19 s (quad 1.4 GHz Itainium 2 machine) to 14,906  s
     (for  a  very old 33.3 MHz Cray Y-MP). There are no options or arguments to
     sysdata

     The information gathered on hardware and software	both  developed  by  the
     same  company  (i.e.  Solaris on Suns, AIX on IBM RS/6000, IRIX on SGI, ...
     etc etc) is generally  more  informative  than  the  free	systems  (Linux,
     NetBSD,  OpenBSD, FreeBSD) where it is usually impossible to get much hard-
     ware information.

EXAMPLES
     Here are some examples of the use of sysdata on a number  of  systems.  The
     large  number  of	examples is for my own use as much as anything, so I can
     keep track of the development of sysdata and see easily where it needs  ex-
     tending. Examples are presented for:

     1) Sun Ultra 80 running Solaris 9
     2) HP C3000 running HP-UX 11
     3) SGI Octane running IRIX 6.5.16
     4) IBM RS/6000 running AIX 5.2
     5) Dec Alpha 600a Personal Workstation running Tru64 5.1B
     6) Cray Y-MP running UNICOS 9
     7) Sun SPARCstation 20 running NetBSD 1.6
     8) Sun SPARCstation 20 running OpenBSD 3.2
     9) Sun SPARCstation 20 running Debian Linux
     10) Sun SPARCstation 20 running Solaris 2.5
     11) Generic PC with 350 MHz Pentium II running Redhat Linux 7.2

     Here's the output from sysdata on these 11 systems.

     e.g. 1 (Sun Ultra 80 running Solaris 9)
     Hardware provider:    Sun_Microsystems
     Hardware platform:    SUNW,Ultra-80
     Machine:		   sun4u
     Sysname:		   SunOS
     Release:		   5.9
     Version:		   Generic_112233-06
     Nodename:		   sparrow
     #CPUs supported:	   4
     #CPUs online:	   4
     CPU type:		   sparcv9
     FPU type:		   sparcv9
     Speed:		   450 MHz
     RAM:		   4096 Mb
     L1 data cache	   unknown kB
     L1 instruction cache: unknown kB
     L2 cache:		   unknown kB

     Here's  an  example on a HP 9000 series Visualize C3000 workstation, fitted
     with one 400 MHz PA-RISC 8500 CPU and 1.5 Gb of RAM

     e.g. 2 (HP 9000 series Visualize C3000)
     Hardware provider:    HP
     Hardware platform:    unknown
     Machine:		   9000/785
     Sysname:		   HP-UX
     Release:		   B.11.00
     Version:		   A
     Nodename:		   robin
     #CPUs supported:	   1
     #CPUs online:	   1
     CPU type:		   532
     FPU type:		   1048577
     Speed:		   400.0 MHz
     RAM:		   1536 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

     Here's another example this time on an SGI Octane R10000 with 2 x	195  MHz
     processors.  Note	the  CPU  and  FPU  types reported at not the R10000 and
     R10010 that are reported by SGI's hinv. sysdata is  not  meant  to  replace
     other more sophisticated ways of obtaining system information (such as hinv
     on IRIX), but its data is useful to record for benchmarking purposes.

     e.g. 3 (SGI Octane R1000)
     Hardware provider:    SGI
     Hardware platform:    unknown
     Machine:		   IP30
     Sysname:		   IRIX64
     Release:		   6.5
     Version:		   04101931
     Nodename:		   owl
     #CPUs supported:	   unknown
     #CPUs online:	   2
     CPU type:		   2343
     FPU type:		   2304
     Speed:		   195 MHz
     RAM:		   1024 Mb
     L1 data cache	   32 kB
     L1 instruction cache: 32 kB
     L2 cache:		   1024 kB

     Here's  an  example using an IBM RS/6000 F50 with 4 x 332 MHz CPUs and 1 GB
     of RAM.

     e.g. 4 (IBM RS/6000 F50)
     Hardware provider:    IBM
     Hardware platform:    unknown
     Machine:		   000245984C00
     Sysname:		   AIX
     Release:		   2
     Version:		   5
     Nodename:		   starling
     #CPUs supported:	   unknown
     #CPUs online:	   4
     CPU type:		   unknown
     FPU type:		   unknown
     Speed:		   unknown MHz
     RAM:		   1024 Mb
     L1 data cache	   unknown kB
     L1 instruction cache: unknown kB
     L2 cache:		   unknown kB

     And here's an example from a single 599 MHz processor Dec Alpha  600a  Per-
     sonal Workstation running Tru64 5.1B

     e.g. 5 (Dec Alpha 600a Personal Workstation)
     Hardware provider:    unknown
     Hardware platform:    Digital_Personal_WorkStation_600au
     Machine:		   alpha
     Sysname:		   OSF1
     Release:		   V5.1
     Version:		   2650
     Nodename:		   dobermann.localhost.ntlworld.co
     #CPUs supported:	   1
     #CPUs online:	   1
     CPU type:		   EV5.6_(21164A)
     FPU type:		   unknown
     Speed:		   599 MHz
     RAM:		   1024 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

     Here's some data collected on a very old Cray Y-MP, which was introduced in
     1991.

     e.g 6 (Cray Y-MP running UNICOS)

     Hardware provider:    Cray
     Hardware platform:    Y-MP
     Machine:		   CRAY_Y-MP
     Sysname:		   sn5176
     Release:		   9.0.2.2
     Version:		   sin.0
     Nodename:		   sn5176
     #CPUs supported:	   unknown
     #CPUs online:	   4
     CPU type:		   unknown
     FPU type:		   unknown
     Speed:		   33.3 MHz
     RAM:		   unknown Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

     That  is all the examples of commercial hardware running the operating sys-
     tems made by the manufacturers of the hardware. The following are free UNIX
     versions. In these cases the data gathered is never as complete. In partic-
     ular the amoumt of memory reported if often less than the real  amount  due
     to memory taken by the operating system (kernel etc). The number of proces-
     sors the system can support is never available.

     Here's  the  first  such  non-commercial  UNIX  from a single processor Sun
     SPARCstation 20 running NetBSD 1.6.

     e.g. 7 (Sun SPARCstation 20 running NetBSD 1.6)
     Hardware provider:    unknown
     Hardware platform:    unknown
     Machine:		   sparc
     Sysname:		   NetBSD
     Release:		   1.6
     Version:		   NetBSD_1.6_(GENERIC)_#0:_Mon_Sep__9_08:2sparc
     Nodename:		   blackbird
     #CPUs supported:	   unknown
     #CPUs online:	   1
     CPU	     type:			   rg:/autobuild/sparc/OBJ/auto-
     build/src/sys/arch/sparc/compile/GENERIC
     FPU type:		   unknown
     Speed:		   unknown MHz
     RAM:		   255 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

     Here's data from a Sun SPARCstation 20 running OpenBSD 3.2. The machine has
     320 Mb of RAM, not 318 Mb as indicated. The number of processors the system
     supports  is  reported  as unknown, but should the system have been running
     Solaris 9, as in the example 1 (sparrow), then this information would  have
     been determined, but it is not available under OpenBSD - or Solaris 2.5 for
     that matter.

     e.g. 8 (Sun SPARCstation 20 running OpenBSD 3.2)
     Hardware provider:    unknown
     Hardware platform:    unknown
     Machine:		   sparc
     Sysname:		   OpenBSD
     Release:		   3.2
     Version:		   GENERIC#36
     Nodename:		   crow.crow.localdomain
     #CPUs supported:	   unknown
     #CPUs online:	   1
     CPU type:		   unknown
     FPU type:		   unknown
     Speed:		   unknown MHz
     RAM:		   319 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb
     The next machine is a Sun SPARCstation 20 running Debian Linux. The version
     of Debian is unknown, but clearly sysdata is unable to determine this.

     e.g. 9 (Sun SPARCstation 20 running Debian Linux)

     Hardware provider:    unknown
     Hardware platform:    unknown
     Machine:		   sparc
     Sysname:		   Linux
     Release:		   2.2.20
     Version:		   #1_Fri_Nov_16_15:48:02_EST_2001
     Nodename:		   dove
     #CPUs supported:	   unknown
     #CPUs online:	   1
     CPU type:		   unknown
     FPU type:		   unknown
     Speed:		   unknown MHz
     RAM:		   281 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

     Here's data from a Sun SPARCstation 20 running Solaris 2.5 (SunOS 5.5). The
     machine probably does have 352 Mb of RAM as reported. The number of proces-
     sors the system supports is reported as unknown, but should the system have
     been  running  Solaris 9, as in the example 1 (sparrow), then this informa-
     tion would have been determined, but it is not available under Solaris 2.5.

     e.g. 10 (Sun SPARCstation 20 Solaris 2.5)
     Hardware provider:    Sun_Microsystems
     Hardware platform:    SUNW,SPARCstation-20
     Machine:		   sun4m
     Sysname:		   SunOS
     Release:		   5.5
     Version:		   Generic
     Nodename:		   bluetit
     #CPUs supported:	   unknown
     #CPUs online:	   2
     CPU type:		   sparc
     FPU type:		   sparc
     Speed:		   125 MHz
     RAM:		   352 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

     Here's a standard PC, fitted with one processor

     e.g. 11 (350 MHz Pentium II PC running Redhat Linux)
     Hardware provider:    unknown
     Hardware platform:    unknown
     Machine:		   i686
     Sysname:		   Linux
     Release:		   2.4.18-5
     Version:		   #1_Mon_Jun_10_15:31:48_EDT_2002
     Nodename:		   tiger
     #CPUs supported:	   unknown
     #CPUs online:	   1
     CPU type:		   unknown
     FPU type:		   unknown
     Speed:		   unknown MHz
     RAM:		   123 Mb
     L1 data cache	   unknown kb
     L1 instruction cache: unknown kb
     L2 cache:		   unknown kb

FILES
     sysdata does not read/write any files.

SEE ALSO
     atlc(1)
     create_bmp_for_circ_in_circ(1)
     create_bmp_for_circ_in_rect(1)
     create_bmp_for_microstrip_coupler(1)
     create_bmp_for_rect_cen_in_rect(1)
     create_bmp_for_rect_cen_in_rect_coupler(1)
     create_bmp_for_rect_in_circ(1)
     create_bmp_for_rect_in_rect(1)
     create_bmp_for_stripline_coupler(1)
     create_bmp_for_symmetrical_stripline(1)
     design_coupler(1)
     find_optimal_dimensions_for_microstrip_coupler(1)
     hinv - SGI's IRIX only.
     readbin(1)

     http://atlc.sourceforge.net		- Home page
     http://sourceforge.net/projects/atlc	- Download area
     atlc-X.Y.Z/docs/html-docs/index.html	- HTML docs
     atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
     atlc-X.Y.Z/examples			- examples

Dr. David Kirkby	    atlc-4.5.0 28th Sep 2003		      sysdata(1)

home | help