Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
TWA(4)			     Kernel Interfaces Manual			  TWA(4)

NAME
     twa -- 3ware 9000/9500/9550/9650 series SATA RAID controllers driver

DEPRECATION NOTICE
     The twa driver is not present in FreeBSD 14.0.

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device twa

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   twa_load="YES"

DESCRIPTION
     The twa driver provides support for AMCC's 3ware 9000/9500/9550/9650 series
     SATA controllers.

     These  controllers are available in 4, 8, 12 or 16-port configurations, and
     support the following RAID levels: 0, 1, 10, 5, 50.  The device  nodes  for
     the  controllers  are of the form /dev/twaX, where X is the controller num-
     ber.  The driver is implemented as a SCSI SIM under CAM, and, as such,  the
     logical  units  that  it  controls  are  accessible  via  the device nodes,
     /dev/daY, where Y is the logical unit number.

HARDWARE
     The twa driver supports the following SATA RAID controllers:

     *	 AMCC's 3ware 9500S-4LP
     *	 AMCC's 3ware 9500S-8
     *	 AMCC's 3ware 9500S-8MI
     *	 AMCC's 3ware 9500S-12
     *	 AMCC's 3ware 9500S-12MI
     *	 AMCC's 3ware 9500SX-4LP
     *	 AMCC's 3ware 9500SX-8LP
     *	 AMCC's 3ware 9500SX-12
     *	 AMCC's 3ware 9500SX-12MI
     *	 AMCC's 3ware 9500SX-16ML
     *	 AMCC's 3ware 9550SX-4LP
     *	 AMCC's 3ware 9550SX-8LP
     *	 AMCC's 3ware 9550SX-12
     *	 AMCC's 3ware 9550SX-12MI
     *	 AMCC's 3ware 9550SX-16ML
     *	 AMCC's 3ware 9650SE-2LP
     *	 AMCC's 3ware 9650SE-4LPML
     *	 AMCC's 3ware 9650SE-8LPML
     *	 AMCC's 3ware 9650SE-12ML
     *	 AMCC's 3ware 9650SE-16ML
     *	 AMCC's 3ware 9650SE-24M8

DIAGNOSTICS
     Whenever the driver encounters a command failure, it prints  out  an  error
     code in the format: "ERROR: (<error source>: <error code>):", followed by a
     text description of the error.  There are other error messages and warnings
     that  the	driver	prints out, depending on the kinds of errors that it en-
     counters.	If the driver is compiled with TWA_DEBUG defined, it prints  out
     a	whole bunch of debug messages, the quantity of which varies depending on
     the value assigned to TWA_DEBUG (0 to 10).

AUTHORS
     The   twa	 driver   and	manpage   were	 written   by	Vinod	 Kashyap
     <vkashyap@FreeBSD.org>.

FreeBSD ports 15.quarterly	   May 9, 2007				  TWA(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=twa&sektion=4&manpath=FreeBSD+Ports+15.1.quarterly>

home | help