FreeBSD Manual Pages
U6RD(8) System Manager's Manual U6RD(8) NAME u6rd -- user-space 6rd (RFC 5569) implementation SYNOPSIS u6rd [-dFhV] [-r v4_common_len] [-u user] tunN prefix/prefixlen relay_v4_addr my_v4_addr DESCRIPTION The u6rd daemon is a userland implementation of 6rd (RFC 5569) for 6rd cus- tomer edge routers. It does not provide the functionality of 6rd relay routers. It runs in the user-space using the tun(4) interface and the raw socket in- terface. The following options are available: -d Output debug messages to stderr. This option is usually combined with -F, which prevents stderr from being redirected to /dev/null. -F Run in the foreground. The u6rd program does not detach itself from the terminal and does not become a daemon. Log messages are output to the stderr in addition to syslog. No PID file is cre- ated. -h Show simple help messages and exit. -r v4_common_len Specify the common prefix length of the IPv4 addresses in your 6rd addressing domain. This should not be confused with the length of the netmask. The default value is 0. -u user Run with the privilege of the specified user instead of root. -V Show the version and exit. The argument prefix/prefixlen specifies the 6rd prefix, which does not count the embedded IPv4 address part. relay_v4_addr is the IPv4 address of the 6rd relay router. my_v4_addr is your global IPv4 address. Currently, u6rd does only minimal preparation; * setting the MTU of the interface to 1280, and * setting UP and RUNNING flags on it. You need to create a tun interface, set parameters on it, and modify the routing table by yourself. See "EXAMPLES" section. The u6rd daemon exits on SIGTERM or SIGINT. Packet counts are logged to syslog (with LOG_INFO priority) on SIGINFO. FILES /var/run/u6rd.pid The PID file of the current instance of the daemon. EXAMPLES Example parameters in this section: The 6rd prefix from your ISP 2001:db8::/32 The 6rd relay router of your ISP 198.51.100.1 Your global IPv4 address 203.0.113.1 Your 6rd delegated prefix is calculated to be 2001:db8:cb00:7101::/64. Note that, converting from IPv4 decimal to IPv6 colon hexadecimal notation, 203.0.113.1 corresponds to cb00:7101. The IPv6 default route in the following examples (2001:db8::1) was chosen semi-arbitrary within the 6rd prefix but outside of delegated prefix, so that all IPv6 packets are routed into the tun0 interface. It could be specified explicitly by the "-ifp tun0" option. FreeBSD 9.0 # ifconfig tun0 create # ifconfig tun0 inet6 2001:db8:cb00:7101::1/32 # ifconfig tun0 inet6 -nud # route add -inet6 default 2001:db8::1 # u6rd -u nobody tun0 2001:db8::/32 198.51.100.1 203.0.113.1 FreeBSD's tun driver will reset its address after the owning process exits. When you restart u6rd, remember to reconfigure the address. FreeBSD 9.0 (configuring at start up) /etc/rc.conf cloned_interfaces="tun0" ifconfig_tun0_ipv6="inet6 2001:db8:cb00:7101::1/32 -nud" ipv6_defaultrouter="2001:db8::1" /etc/start_if.tun0 /usr/local/sbin/u6rd -u nobody tun0 2001:db8::/32 \ 198.51.100.1 203.0.113.1 NetBSD 5.1 # ifconfig tun0 create # ifconfig tun0 inet6 2001:db8:cb00:7101::1/32 # ndp -i tun0 -- -nud # sysctl -w net.inet6.tcp6.mss_ifmtu=1 # route add -inet6 default 2001:db8::1 # u6rd -u nobody tun0 2001:db8::/32 198.51.100.1 203.0.113.1 Setting net.inet6.tcp6.mss_ifmtu to 1 is recommended. Mac OS X 10.7 (Darwin 11.3.0) # u6rd -u nobody utun0 2001:db8::/32 198.51.100.1 203.0.113.1 # ifconfig utun0 inet6 2001:db8:cb00:7101::1/32 # ndp -i utun0 -- -nud # route add -inet6 default 2001:db8::1 The utun device, instead of tun, is used on Mac OS X. A utun interface is created by the daemon (cannot be created with ifconfig), so the interface address and the default route need to be configured after executing the daemon. More complex example on FreeBSD Parameters are same except that the common prefix length is 8 bits in your 6rd addressing domain. In this case, the delegated prefix is concatenation of the 6rd prefix (32 bits) and unique bits of your IPv4 address (32 - 8 = 24 bits), so its length is 56 bits. # ifconfig tun0 create # ifconfig tun0 inet6 2001:db8:71:100::1/32 # ifconfig tun0 inet6 -nud # ifconfig em0 inet6 2001:db8:71:101::1/64 # route add -inet6 default 2001:db8::1 # route add -inet6 2001:db8:71:100:: -prefixlen 56 ::1 -reject # u6rd -u nobody -r 8 tun0 2001:db8::/32 198.51.100.1 203.0.113.1 SEE ALSO tun(4), ifconfig(8), route(8), sysctl(8) B. Carpenter and K. Moore, Connection of IPv6 Domains via IPv4 Clouds, RFC 3056, February 2001. P. Savola and C. Patel, Security Considerations for 6to4, RFC 3964, Decem- ber 2004. R. Despres, IPv6 Rapid Deployment on IPv4 Infrastructures (6rd), RFC 5569, January 2010. W. Townsley and O. Troan, IPv6 Rapid Deployment on IPv4 Infrastructures (6rd) -- Protocol Specification, RFC 5969, August 2010. AUTHORS KAMADA Ken'ichi. BUGS * Relay router functionality is not (and will never be) implemented. * Some policies (e.g., rejecting private addresses) are hard-coded. You need to modify the source code to change those policies, when, for ex- ample, you want to use private addresses as described in Section 4 of RFC 5569. * Packets are discarded silently without returning ICMPv6 messages. FreeBSD ports 15.quarterly June 2, 2013 U6RD(8)
NAME | SYNOPSIS | DESCRIPTION | FILES | EXAMPLES | SEE ALSO | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=u6rd&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>