user_caps(5) File formats user_caps(5) NAME user_caps - user-defined terminfo capability format SYNOPSIS infocmp -x tic -x DESCRIPTION Background Prior to ncurses 5.0 (1999), terminfo databases used a fixed repertoire of terminal capabilities designed for the SVr2 terminal database in 1984, added to in stages through SVr4 (1989), and standardized in X/Open Curses starting in 1995. Most such additions to this fixed repertoire suppelmented the tables of Boolean, numeric, and string capabilities. Rather than changing the mean- ing of an existing capability, a new name was added. The terminfo database uses a binary format; binary compatibility was ensured by using a header that counted the number of items in the tables for each type of capability. Because each curses vendor extended the standard capability lists in dis- tinct ways, a library could be programmed to recognize only compiled term- info entries that it was prepared to interpret. Standardization was incom- plete. * X/Open Curses describes only the source format, not its binary repre- sentation on disk. Library developers rely upon SVr4 documentation and reverse engineering of compiled terminfo files to match the binary format. * Lacking a standard for the binary format, most implementations copy the SVr2 binary format, which uses 16-bit signed integers, and is limited to 4096-byte entries. The SVr2 format cannot represent very large numeric capability values, nor can it represent large numbers of key definitions, as are required to distinguish multiple modifier keys used in combination with a func- tion key. * The tables of capability names differ between implementations. Although they may provide all of the standard capability names, each arranges its table entries differently because some features were added as needed, while others were added -- out of order -- for X/Open Curses conformance. While ncurses's capability repertoire is closest to that of Solaris, the set of capabilities supported by each vendor's terminfo database differs from the list published by X/Open Curses. ncurses can be con- figured with tables that match the terminal databases for AIX, HP-UX, or OSF/1, rather than the default Solaris-like configuration. * In SVr4 curses and ncurses, the terminal database is defined at compile time by interpolating a text file that lists the different terminal ca- pabilities. In principle, the text file can be extended, but doing so requires re- compiling and reinstalling the library. The text file used by ncurses for terminal capabilities includes details of extensions to X/Open Curses made by various systems. For example, ncurses supports the fol- lowing nonstandard capabilities in each configuration. memory_lock (meml) lock memory above cursor memory_unlock (memu) unlock memory box_chars_1 (box1) box characters primary set The memory lock/unlock capabilities were included because they were used in the X11R6 terminal description for xterm(1). tic uses the box1 capability to cope with terminal descriptions written for AIX. During the 1990s, some application developers were reluctant to use term- info in spite of its performance (and other) advantages over termcap. * The fixed repertoire prevented users from adding support for terminal features unanticipated by X/Open Curses (or required them to reuse ex- isting capabilities as a workaround). * The limitation to 16-bit signed integers was also mentioned. Because termcap stores everything as a string, it could represent larger num- bers. Although termcap's extensibility was rarely used -- the claimant was never an implementor who had actually exercised it -- the criticism had a point. ncurses 5.0 provided a way to detect nonstandard capabilities, to determine their type, and to optionally store and retrieve them in a way that did not interfere with other applications. ncurses terms these user-defined capa- bilities because no modifications to the standard capability list are needed. The ncurses utilities tic and infocmp have a command-line option "-x" to control whether the nonstandard capabilities are stored or retrieved. ncurses provides use_extended_names(3X) to programs for the same purpose. When compiling a terminal database, if "-x" is used, tic stores a user-de- fined capability if the capability name is not standard. Because ncurses provides a termcap library interface, these user-defined capabilities may be visible to termcap applications. * The termcap interface (like all implementations of termcap) restricts capability names to two characters. When the capability is simple enough for use in a termcap application, it is provided as a two-character name. * Other user-defined capabilities employ features not usable in termcap, such as parameterized strings that use more than two parameters or re- quire more powerful expressions than termcap supports. Such capabili- ties should, in the terminfo database, have names at least three char- acters in length. * Some terminals can send distinct strings for special keys (cursor-, keypad- or function-keys) depending on modifier keys (shift, control, etc.). While terminfo and termcap define a set of sixty function key names, to which a series of keys can be assigned, that is insufficient for more than a dozen keys multiplied by more than a couple of modifier combinations. The ncurses database uses a convention based on xterm(1) to provide extended special-key names. Fitting that into termcap's limitation of 2-character names would be pointless. These extended keys are available only with terminfo. Recognized Capabilities The ncurses library employs user-definable capabilities. While the term- info database may have other extensions, ncurses makes explicit checks for the following. AX (Boolean) asserts that the terminal interprets SGR 39 and SGR 49 by resetting the foreground and background colors, respectively, to the default. screen(1) recognizes this capability as well. E3 (string) tells an application how to clear the terminal's scrollback buffer. When present, the clear(1) program sends this before clear- ing the terminal. The command "tput clear" does the same thing. NQ (Boolean) suppresses a consistency check in tic for the ncurses string capabilities user6 (u6) through user9 (u9), which tell an ap- plication how to query the terminal's cursor position and its device attributes. RGB (Boolean, numeric, or string) asserts that the set_a_foreground (setaf) and set_a_background (setab) capabilities employ direct col- ors, using an RGB (red/green/blue) convention. This capability al- lows color_content(3X) to return appropriate values without requiring the application to initialize colors using init_color(3X). The capability type determines the values ncurses sees. Boolean implies that the number of bits for red, green, and blue are the same. Starting with the value of the capability max_colors (colors; termcap: co), ncurses adds two, divides the sum by three, and assigns the result to red, green, and blue, in that order. If the number of bits needed for the number of colors is not a multiple of three, the blue (and green) color channels lose in comparison to red. numeric tells ncurses what result to add to red, green, and blue. If ncurses runs out of bits, blue (and green) lose just as in the Boolean case. string specify the quantity of bits used for red, green, and blue color channels as a slash-separated list of decimal integers. Because there are several RGB encodings in use, applications that make assumptions about the number of bits per color channel are un- likely to work reliably. As a trivial case, one could define RGB#1 to represent the standard eight ANSI X3.64/ECMA-48/ISO 6429 colors using one bit per color channel. U8 (numeric) asserts whether ncurses must use Unicode values for line- drawing characters, and that it should ignore the alternate character set (ACS) capabilities when the locale uses UTF-8 encoding. See the discussion of NCURSES_NO_UTF8_ACS in section "ENVIRONMENT" of ncurses(3X). Set this capability to a nonzero value to enable it. XM (string) override ncurses's built-in string that directs xterm(1) to enable or disable mouse mode. ncurses sends a character sequence to the terminal to initialize mouse mode, and when the user clicks the mouse buttons or (in certain modes) moves the mouse, handles the characters sent back by the ter- minal to tell the application what was done with the mouse. The mouse protocol is enabled when the mask argument to the mouse- mask(3X) function is nonzero. By default, ncurses handles the re- sponses for the X11 xterm mouse protocol. It also knows about the SGR 1006 xterm mouse protocol, but must to be told to look for it specifically. ncurses is not be able to guess which of the two modes is used, because the responses are enough alike that only confusion would result. The XM capability has a single numeric parameter. If nonzero, the mouse protocol should be enabled. If zero, the mouse protocol should be disabled. ncurses inspects this capability if it is present, to see whether the 1006 protocol is used. If so, it expects the re- sponses to use the SGR 1006 xterm mouse protocol. The xterm mouse protocol is used by other terminal emulators. The terminal database uses building blocks for the various xterm mouse protocols usable in customized terminal descriptions. The terminal database building blocks for this mouse feature also have an experimental capability, xm, that describes the mouse re- sponse. No known interpreter uses this information, which could make mouse support completely data-driven. xm shows the format of the mouse responses. In this experimental ca- pability, the parameters are as follows. p1 y-ordinate p2 x-ordinate p3 button p4 state, e.g., pressed or released p5 y-ordinate starting region p6 x-ordinate starting region p7 y-ordinate ending region p8 x-ordinate ending region Here are examples from the terminal database for the most commonly used xterm mouse protocols. xterm+x11mouse|X11 xterm mouse protocol, kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;, xm=\E[M %?%p4%t%p3%e%{3}%;%' '%+%c %p2%'!'%+%c %p1%'!'%+%c, xterm+sm+1006|xterm SGR-mouse, kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;, xm=\E[<%i%p3%d; %p1%d; %p2%d; %?%p4%tM%em%;, Extended Key Definitions Several terminals provide the ability to send distinct strings for combina- tions of modified special keys. There is no standard for what those keys can send. Since 1999, xterm(1) has supported shift, control, alt, and meta modifiers which produce distinct special-key strings. In a terminal description, ncurses has no special knowledge of the modifiers used. Applications can use the naming convention established for xterm to find these special keys in the terminal description. Starting with the curses convention that capability codes describing the input generated by a terminal's key caps begin with "k", and that shifted special keys use uppercase letters in their names, ncurses's terminal data- base defines the following names and codes to which a suffix is added. Code Description ---------------------------------------------------------------------- kDC shifted kdch1 (delete character) kDN shifted kcud1 (cursor down) kEND shifted kend (end) kHOM shifted khome (home) kLFT shifted kcub1 (cursor back) kNXT shifted knext (next) kPRV shifted kprev (previous) kRIT shifted kcuf1 (cursor forward) kUP shifted kcuu1 (cursor up) Keycap nomenclature on the Unix systems for which curses was developed dif- fers from today's ubiquitous descendants of the IBM PC/AT keyboard layout. In the foregoing, interpret "backward" as "left", "forward" as "right", "next" as "page down", and "prev(ious)" as "page up". These are the suffixes used to denote the modifiers: Value Description ---------------------------------- 2 Shift 3 Alt 4 Shift + Alt 5 Control 6 Shift + Control 7 Alt + Control 8 Shift + Alt + Control 9 Meta 10 Meta + Shift 11 Meta + Alt 12 Meta + Alt + Shift 13 Meta + Ctrl 14 Meta + Ctrl + Shift 15 Meta + Ctrl + Alt 16 Meta + Ctrl + Alt + Shift ncurses defines no capabilities for modified F-keys; terminal descriptions can refer to names that ncurses allocates at runtime to key codes. To use these keys in an ncurses program, an application could do this: * using a list of extended key names, ask tigetstr(3X) for their values, and * given the list of values, ask key_defined(3X) for the key-code which would be returned for those keys by wgetch(3X). PORTABILITY The "-x" extension feature of tic and infocmp has been adopted in NetBSD curses. That implementation stores user-defined capabilities, but makes no use of these capabilities itself. AUTHORS Thomas E. Dickey beginning with ncurses 5.0 (1999) SEE ALSO infocmp(1M), tic(1M) In the source form of the terminal database, terminfo.src, the section "NCURSES USER-DEFINABLE CAPABILITIES". summarizes commonly-used user-de- fined capabilities employed in the terminal descriptions. Some of those features are mentioned in screen(1) or tmux(1). XTerm Control Sequences provides further information on the xterm(1) fea- tures that are used in these extended capabilities. ncurses 6.6 2025-11-11 user_caps(5)
NAME | SYNOPSIS | DESCRIPTION | PORTABILITY | AUTHORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=user_caps&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>