FreeBSD Manual Pages
VINYL-CLI(7) Miscellaneous Information Manual VINYL-CLI(7) NAME vinyl-cli - Vinyl Cache Command Line Interface DESCRIPTION Vinyl Cache has a command line interface (CLI) which can control and change most of the operational parameters and the configuration of Vinyl Cache, without interrupting the running service. The CLI can be used for the following tasks: configuration You can upload, change and delete VCL files from the CLI. parameters You can inspect and change the various parameters Vinyl Cache has available through the CLI. The individual parameters are documented in the vinyld(1) man page. bans Bans are filters that are applied to keep Vinyl Cache from serv- ing stale content. When you issue a ban Vinyl Cache will not serve any banned object from cache, but rather re-fetch it from its backend servers. process management You can stop and start the cache (child) process though the CLI. You can also retrieve the latest stack trace if the child process has crashed. If you invoke vinyld(1) with -T, -M or -d the CLI will be available. In debug mode (-d) the CLI will be in the foreground, with -T you can con- nect to it with vinyladm or telnet and with -M vinyld will connect back to a listening service pushing the CLI to that service. Please see vinyld(1) for details. Syntax The Vinyl Cache CLI is similar to another command line interface, the Bourne Shell. Commands are usually terminated with a newline, and they may take arguments. The command and its arguments are tokenized before parsing, and as such arguments containing spaces must be enclosed in double quotes. It means that command parsing of help banner is equivalent to "help" banner because the double quotes only indicate the boundaries of the help to- ken. Within double quotes you can escape characters with \ (backslash). The \n, \r, and \t get translated to newlines, carriage returns, an tabs. Double quotes and backslashes themselves can be escaped with \" and \\ respectively. To enter characters in octals use the \nnn syntax. Hexadecimals can be entered with the \xnn syntax. Commands may not end with a newline when a shell-style here document (here-document or heredoc) is used. The format of a here document is: << word here document word word can be any continuous string chosen to make sure it doesn't appear naturally in the following here document. Traditionally EOF or END is used. Quoting pitfalls Integrating with the Vinyl Cache CLI can be sometimes surprising when quoting is involved. For instance in Bourne Shell the delimiter used with here documents may or may not be separated by spaces from the << token: cat <<EOF hello world EOF hello world With the Vinyl Cache CLI, the << and EOF tokens must be separated by at least one blank: vcl.inline boot <<EOF 106 258 Message from VCC-compiler: VCL version declaration missing Update your VCL to Version 4 syntax, and add vcl 4.0; on the first line of the VCL files. ('<vcl.inline>' Line 1 Pos 1) <<EOF ##--- Running VCC-compiler failed, exited with 2 VCL compilation failed With the missing space, the here document can be added and the actual VCL can be loaded: vcl.inline test << EOF vcl 4.0; backend be { .host = "localhost"; } EOF 200 14 VCL compiled. A big difference with a shell here document is the handling of the << token. Just like command names can be quoted, the here document token keeps its meaning, even quoted: vcl.inline test "<<" EOF vcl 4.0; backend be { .host = "localhost"; } EOF 200 14 VCL compiled. When using a front-end to the Vinyl Cache CLI like vinyladm, one must take into account the double expansion happening. First in the shell launching the vinyladm command and then in the Vinyl Cache CLI itself. When a command's parameter require spaces, you need to ensure that the Vinyl Cache CLI will see the double quotes: vinyladm param.set cc_command '"my alternate cc command"' Change will take effect when VCL script is reloaded Otherwise if you don't quote the quotes, you may get a seemingly unre- lated error message: vinyladm param.set cc_command "my alternate cc command" Unknown request. Type 'help' for more info. Too many parameters Command failed with error code 105 If you are quoting with a here document, you must wrap it inside a shell multi-line argument: vinyladm vcl.inline test '<< EOF vcl 4.0; backend be { .host = "localhost"; } EOF' VCL compiled. Another difference with a shell here document is that only one here document can be used on a single command line. For example, it is pos- sible to do this in a shell script: #!/bin/sh cat << EOF1 ; cat << EOF2 hello EOF1 world EOF2 The expected output is: hello world With the Vinyl Cache CLI, only the last parameter may use the here doc- ument form, which greatly restricts the number of commands that can ef- fectively use them. Trying to use multiple here documents only takes the last one into account. For example: command argument << EOF1 << EOF2 heredoc1 EOF1 heredoc2 EOF2 This conceptually results in the following command line: • "command" • "argument" • "<<" • "EOF1" • "heredoc1\nEOF1\nheredoc2\n" Other pitfalls include variable expansion of the shell invoking viny- ladm but this is not directly related to the Vinyl Cache CLI. If you get the quoting right you should be fine even with complex commands. JSON A number of commands with informational responses support a -j parame- ter for JSON output, as specified below. The top-level structure of the JSON response is an array with these first three elements: • A version number for the JSON format (integer) • An array of strings that comprise the CLI command just received • The time at which the response was generated, as a Unix epoch time in seconds with millisecond precision (floating point) The remaining elements of the array form the data that are specific to the CLI command, and their structure and content depend on the command. For example, the response to status -j just contains a string in the top-level array indicating the state of the child process ("running", "stopped" and so forth): [ 2, ["status", "-j"], 1538031732.632, "running" ] The JSON responses to other commands may have longer lists of elements, which may have simple data types or form structured objects. JSON output is only returned if command execution was successful. The output for an error response is always the same as it would have been for the command without the -j parameter. Commands auth <response> Authenticate. backend.list [-j] [-p] [<backend_pattern>] List backends. -p also shows probe status. -j specifies JSON output. Unless -j is specified for JSON output, the output format is five columns of dynamic width, separated by white space with the fields: • Backend name • Admin: How health state is determined: • healthy: Set healthy through backend.set_health. • sick: Set sick through backend.set_health. • probe: Health state determined by a probe or some other dynamic mechanism. • deleted: Backend has been deleted, but not yet cleaned up. Admin has precedence over Health • Probe X/Y: X out of Y checks have succeeded X and Y are backend specific and may represent probe checks, other backends or any other metric. If there is no probe or the director does not provide details on probe check results, 0/0 is output. • Health: Probe health state • healthy • sick If there is no probe, healthy is output. • Last change: Timestamp when the health state last changed. The health state reported here is generic. A backend's health may also depend on the context it is being used in (e.g. the object's hash), so the actual health state as visible from VCL (e.g. using std.healthy()) may differ. For -j, the object members should be self explanatory, matching the fields described above. probe_message has the format [X, Y, "state"] as described above for Probe. JSON Probe details (-j -p arguments) are director specific. backend.set_health <backend_pattern> [auto|healthy|sick] Set health status of backend(s) matching <backend_pattern>. • With auto, the health status is determined by a probe or some other dynamic mechanism, if any • healthy sets the backend as usable • sick sets the backend as unusable ban <field> <operator> <arg> [&& <field> <oper> <arg> ...] Mark obsolete all objects where all the conditions match. See std.ban() for details ban.list [-j] List the active bans. Unless -j is specified for JSON output, the output format is: • Time the ban was issued. • Objects referencing this ban. • C if ban is completed = no further testing against it. • if lurker debugging is enabled: • R for req.* tests • O for obj.* tests • Pointer to ban object • Ban specification Durations of ban specifications get normalized, for example "7d" gets changed into "1w". banner Print welcome banner. help [-j|<command>] Show command/protocol help. -j specifies JSON output. panic.clear [-z] Clear the last panic, if any, -z will clear related vinylstat counter(s) panic.show [-j] Return the last panic, if any. -j specifies JSON output -- the panic message is returned as an un- structured JSON string. param.reset [-j] <param> Reset parameter to default value. The JSON output is the same as param.show -j <param> and contains the updated value as it would be represented by a subsequent execu- tion of param.show. param.set [-j] <param> <value> Set parameter value. The JSON output is the same as param.show -j <param> and contains the updated value as it would be represented by a subsequent execu- tion of param.show. This can be useful to later verify that a parameter value didn't change and to use the value from the JSON output to reset the para- meter to the desired value. param.show [-l|-j] [<param>|changed] Show parameters and their values. The long form with -l shows additional information, including docu- mentation and minimum, maximum and default values, if defined for the parameter. JSON output is specified with -j, in which the infor- mation for the long form is included; only one of -l or -j is per- mitted. If a parameter is specified with <param>, show only that pa- rameter. If changed is specified, show only those parameters whose values differ from their defaults. pid [-j] Show the pid of the master process, and the worker if it's running. -j specifies JSON output. ping [-j] [<timestamp>] Keep connection alive. The response is formatted as JSON if -j is specified. quit Close connection. start Start the Vinyl Cache process. status [-j] Check status of Vinyl Cache process. -j specifies JSON output. stop Stop the Vinyl Cache process. storage.list [-j] List storage devices. -j specifies JSON output. vcl.deps [-j] List all loaded configuration and their dependencies. Unless -j is specified for JSON output, the output format is up to two columns of dynamic width separated by white space with the fields: • VCL: a VCL program • Dependency: another VCL program it depends on Only direct dependencies are listed, and VCLs with multiple depen- dencies are listed multiple times. vcl.discard <name_pattern>... Unload the named configurations (when possible). Unload the named configurations and labels matching at least one name pattern. All matching configurations and labels are discarded in the correct order with respect to potential dependencies. If one configuration or label could not be discarded because one of its de- pendencies would remain, nothing is discarded. Each individual name pattern must match at least one named configuration or label. vcl.inline <configname> <quoted_VCLstring> [auto|cold|warm] Compile and load the VCL data under the name provided. Multi-line VCL can be input using the here document ref_syntax. vcl.label <label> <configname> Apply label to configuration. A VCL label is like a UNIX symbolic link, a name without substance, which points to another VCL. Labels are mandatory whenever one VCL references another. vcl.list [-j] List all loaded configuration. Unless -j is specified for JSON output, the output format is five or seven columns of dynamic width, separated by white space with the fields: • status: active, available or discarded • state: label, cold, warm, or auto • temperature: init, cold, warm, busy or cooling • busy: number of references to this vcl (integer) • name: the name given to this vcl or label • [ <- | -> ] and label info last two fields) • -> <vcl> : label "points to" the named <vcl> • <- (<n> label[s]): the vcl has <n> label(s) vcl.load <configname> <filename> [auto|cold|warm] Compile and load the VCL file under the name provided. vcl.show [-v] [<configname>] Display the source code for the specified configuration. vcl.state <configname> auto|cold|warm Force the state of the named configuration. vcl.symtab Dump the VCL symbol-tables. vcl.use <configname|label> Switch to the named configuration immediately. Backend Pattern A backend pattern can be a backend name or a combination of a VCL name and backend name in "VCL.backend" format. If the VCL name is omitted, the active VCL is assumed. Partial matching on the backend and VCL names is supported using shell-style wildcards, e.g. asterisk (*). Examples: backend.list def* backend.list b*.def* backend.set_health default sick backend.set_health def* healthy backend.set_health * auto Ban Expressions A ban expression consists of one or more conditions. A condition con- sists of a field, an operator, and an argument. Conditions can be ANDed together with "&&". A field can be any of the variables from VCL, for instance req.url, req.http.host or obj.http.set-cookie. Operators are "==" for direct comparison, "~" for a regular expression match, and ">" or "<" for size comparisons. Prepending an operator with "!" negates the expression. The argument could be a quoted string, a regexp, or an integer. Inte- gers can have "KB", "MB", "GB" or "TB" appended for size related fields. VCL Temperature A VCL program goes through several states related to the different com- mands: it can be loaded, used, and later discarded. You can load sev- eral VCL programs and switch at any time from one to another. There is only one active VCL, but the previous active VCL will be maintained ac- tive until all its transactions are over. Over time, if you often refresh your VCL and keep the previous versions around, resource consumption will increase, you can't escape that. How- ever, most of the time you want to pay the price only for the active VCL and keep older VCLs in case you'd need to rollback to a previous version. The VCL temperature allows you to minimize the footprint of inactive VCLs. Once a VCL becomes cold, Vinyl Cache will release all the re- sources that can be be later reacquired. You can manually set the tem- perature of a VCL or let Vinyl Cache automatically handle it. EXAMPLES Load a multi-line VCL using shell-style here document: vcl.inline example << EOF vcl 4.0; backend www { .host = "127.0.0.1"; .port = "8080"; } EOF Ban all requests where req.url exactly matches the string /news: ban req.url == "/news" Ban all documents where the serving host is "example.com" or "www.exam- ple.com", and where the Set-Cookie header received from the backend contains "USERID=1663": ban req.http.host ~ "^(?i)(www\\.)?example\\.com$" && obj.http.set-cookie ~ "USERID=1663" AUTHORS This manual page was originally written by Per Buer and later modified by Federico G. Schwindt, Dridi Boukelmoune, Lasse Karstensen and Poul-Henning Kamp. SEE ALSO • vinyladm(1) • vinyld(1) • vcl(7) • For API use of the CLI: The Reference Manual. VINYL-CLI(7)
NAME | DESCRIPTION | EXAMPLES | AUTHORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=vinyl-cli&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>