FreeBSD Manual Pages
XLI(1) General Commands Manual XLI(1) NAME xli, xsetbg, xview - load images into an X11 window or onto the root window SYNOPSIS xli [global_options] {[image_options] image ...} xli [global_options] [image_options] stdin < image DESCRIPTION xli displays images in an X11 window or loads them onto the root window. See the IMAGE TYPES section below for supported image types. If the filename stdin is given, xli will read the image from standard in- put. If the destination display cannot support the number of colors in the im- age, the image will be dithered (monochrome destination) or have its col- ormap reduced (color destination) as appropriate. This can also be done forcibly with the -halftone, -dither, and -colors options. A variety of image manipulations can be specified, including gamma correc- tion, brightening, clipping, dithering, depth-reduction, rotation, and zooming. Most of these manipulations have simple implementations; speed was opted for above accuracy. If you are viewing a large image in a window, the initial window will be at most 90% of the size of the display unless the window manager does not cor- rectly handle window size requests or if you've used the -fullscreen or -fillscreen options. You may move the image around in the window by drag- ging with the first mouse button. The cursor will indicate which direc- tions you may drag, if any. When the keyboard focus is in the window you can: Type 'q' or '^C' to exit xli. Type space, 'n' or 'f' to move to the next image in the list. Type 'b' or 'p' to move to the previous image in the list. Type . to reload the image. Type l to rotate the image anti-clockwise. Type r to rotate the image clockwise. Type 0 to set the images assumed gamma to your display gamma (usually darkens images) Type 1 to set the images assumed gamma to 1.0 (usually lightens images) Type 5-2 to lighten the image (5 in small steps, up to 2 in large steps) Type 6-9 to darken the image (6 in small steps, up to 9 in large steps) A wide variety of common image manipulations can be done by mixing and matching the available options. See the section entitled HINTS FOR GOOD IMAGE DISPLAYS for some ideas. Xsetbg is equivalent to xli -onroot -quiet and xview is equivalent to xli -view -verbose. RESOURCE CLASS xli uses the resource class name _XSETROOT_Id for window managers which need this resource set. GLOBAL OPTIONS The following options affect the global operation of xli. They may be specified anywhere on the command line. -default Set the root background to the default root weave. This is the same as xsetroot with no arguments. -debug Talk to the X server in synchronous mode. This is useful for debug- ging. If an X error is seen while in this mode, a core will be dumped. -dumpcore Signals will not be trapped, and instead a coredump will occur. -display display_name X11 display name to send the image(s) to. -dispgamma Display_gamma Specify the gamma correction value appropriate for the display de- vice. This overides the value read from the environment variable DISPLAY_GAMMA, or the default value of 2.2, which is approximately correct for many displays. A value of between 1.6 and 2.8 is reason- able. If individual images are too bright or dark, use the -gamma option. There is an image provided with xli called 'chkgamma.jpg' that lets you set the display gamma reasonably accurately. This file contains two grayscale ramps. The ramps are chosen to look linear to the human eye, one using con- tinuous tones, and the other using dithering. When the display gamma is correct, then the two ramps should look symmetrical, and the point at which they look equally bright should be almost exactly half way from the top to the bottom. (To find this point it helps if you move away a little from the screen, and de-focus your eyes a bit.) If the equal brightness point is above center increase the gamma, and de- crease it if it is below the center. The value will usually be around 2.2 Once you've got it right, you can set the DISPLAY_GAMMA environment vari- able in your .profile -fillscreen Use the whole screen for displaying an image. The image will be zoomed so that it just fits the size of the screen. If -onroot is also specified, it will be zoomed to completely fill the screen. -fit Force image to use the default visual and colormap. This is useful if you do not want technicolor effects when the colormap focus is inside the image window, but it may reduce the quality of the dis- played image. This is on by default if -onroot or -windowid is specified. -fork Fork xli. This causes xli to disassociate itself from the shell. This option automatically turns on -quiet. -fullscreen Use the whole screen for displaying an image. The image will be sur- rounded by a border if it is smaller than the screen. If -onroot is also specified, the image will be zoomed so that it just fits the size of the screen. -geometry WxH[{+-X}{+-}Y] This sets the size of the window onto which the images are loaded to a different value than the size of the image. When viewing an image in a window, this can be used to set the size and position of the viewing window. If the size is not specified in the geometry, (or is set to 0), then the size will be chosen to be small enough to able to fit the window in the screen (as usual). -goto image_name When the end of the list of images is reached, go to image im- age_name. This is useful for generating looped slideshows. If more than one image of the same name as the target exists on the argument list, the first in the argument list is used. -help [option ...] Give information on an option or list of options. If no option is given, a simple interactive help facility is invoked. -identify Identify the supplied images rather than display them. -install Forcibly install the images colormap when the window is focused. This violates ICCCM standards and only exists to allow operation with naive window managers. Use this option only if your window manager does not install colormaps properly. -list List the images which are along the image path. -onroot Load image(s) onto the root window instead of viewing in a window. This option automatically sets the -fit option. This is the oppo- site of -view. XSetbg has this option set by default. If used in conjunction with -fullscreen, the image will be zoomed to just fit. If used with -fillscreen, the image will be zoomed to completely fill the screen. -border, -at, and -center also affect the results. -path Displays the image path and image suffixes which will be used when looking for images. These are loaded from ~/.xlirc and optionally from a system wide file (normally /usr/lib/xlirc). -pixmap Force the use of a pixmap as backing-store. This is provided for servers where backing-store is broken (such as some versions of the AIXWindows server). It may improve scrolling performance on servers which provide backing-store. -private Force the use of a private colormap. Normally colors are allocated shared unless there are not enough colors available. -quiet Forces xli and xview to be quiet. This is the default for xsetbg, but the others like to whistle. -supported List the supported image types. -verbose Causes xli to be talkative, telling you what kind of image it's playing with and any special processing that it has to do. This is the default for xview and xli. -version Print the version number and patchlevel of this version of xli. -view View image(s) in a window. This is the opposite of -onroot and the default for xview and xli. -visual visual_name Force the use of a specific visual type to display an image. Nor- mally xli tries to pick the best available image for a particular image type. The available visual types are: DirectColor, True- Color, PseudoColor, StaticColor, GrayScale, and StaticGray. Noncon- flicting names may be abbreviated and case is ignored. -windowid hex_window_id Sets the background pixmap of a particular window ID. The argument must be in hexadecimal and must be preceded by "0x" (eg -windowid 0x40000b. This is intended for setting the background pixmap of some servers which use untagged virtual roots (eg HP-VUE), but can have other interesting applications. PERSISTENT IMAGE OPTIONS The following options may precede each image. They take effect from the next image, and continue until overridden or canceled with -newoptions. -border color This sets the background portion of the window or clipped image which is not covered by any images to be color. -brighten percentage Specify a percentage multiplier for a color images colormap. A value of more than 100 will brighten an image, one of less than 100 will darken it. -colors n Specify the maximum number of colors to use in the image. This is a way to forcibly reduce the depth of an image. -cdither -colordither Dither the image with a Floyd-Steinberg dither if the number of col- ors is reduced. This will be slow, but will give a better looking result with a restricted color set. -cdither and -colordither are equivalent. -delay secs Sets xli to automatically advance to the following image, secs sec- onds after the next image file is displayed. -dither Dither a color image to monochrome using a Floyd-Steinberg dithering algorithm. This happens by default when viewing color images on a monochrome display. This is slower than -halftone and affects the image accuracy but usually looks much better. -gamma Image_gamma Specify the gamma of the display the image was intended to be dis- played on. Images seem to come in two flavors: 1) linear color im- ages, produced by ray tracers, scanners etc. These sort of images generally look too dark when displayed directly to a CRT display. 2) Images that have been processed to look right on a typical CRT dis- play without any sort of processing. These images have been 'gamma corrected'. By default, xli assumes that 8 bit images have been gamma corrected and need no other processing. 24 bit images are as- sumed to be linear. If a linear image is displayed as if it is gamma corrected it will look too dark, and a gamma value of 1.0 should be specified, so that xli can correct the image for the CRT display device. If a gamma corrected image is displayed as if it were a linear image, then it will look too light, and a gamma value of (approximately) 2.2 should be specified for that image. Some formats (RLE) allow the image gamma to be embedded as a comment in the file itself, and the -gamma option allows overriding of the file comment. In general, values smaller than 2.2 will lighten the im- age, and values greater than 2.2 will darken the image. In general this will work better than the -brighten option. -gray Convert an image to grayscale. This is very useful when displaying colorful images on servers with limited color capability. The op- tional spelling -grey may also be used. -idelay secs Set the delay to be used for this image to secs seconds (see -de- lay). If -delay was specified, this overrides it. If it was not specified, this sets the automatic advance delay for this image while others will wait for the user to advance them. -smooth Smooth a color image. This reduces blockiness after zooming an im- age up. If used on a monochrome image, nothing happens. This op- tion can take awhile to perform, especially on large images. You may specify more than one -smooth option per image, causing multiple iterations of the smoothing algorithm. -title window_title Set the titlebar of the window used to display the image. This will overide any title that is read from the image file. The title will also be used for the icon name. -xpm color_context_key Select the prefered xpm colour map. XPM files may contain more than one color mapping, each mapping being appropriate for a particular visual. Normally xli will select an apropriate color mapping from that supported by the XPM file by checking on the default X visual class and depth. This option allows the user to overide this choice. Legal values of color_context_key are: m, g4, g and c. m = mono, g4 = 4 level gray, g = gray, c = color ). -xzoom percentage Zoom the X axis of an image by percentage. A number greater than 100 will expand the image, one smaller will compress it. A zero value will be ignored. This option, and the related -yzoom are use- ful for correcting the aspect ratio of images to be displayed. -yzoom percentage Zoom the Y axis of an image by percentage. See -xzoom for more in- formation. -zoom percentage Zoom both the X and Y axes by percentage. See -xzoom for more in- formation. Technically the percentage actually zoomed is the square of the number supplied since the zoom is to both axes, but I opted for consistency instead of accuracy. -newoptions Reset options that propagate. The -bright, -colors, -colordither, -delay, -dither, -gamma, -gray, -normalize, -smooth, -xzoom, -yzoom, and -zoom options normally propagate to all following images. LOCAL IMAGE OPTIONS The following options may precede each image. These options are local to the image they precede. -at X,Y Indicates coordinates to load the image at X,Y on the base image. If this is an option to the first image, and the -onroot option is specified, the image will be loaded at the given location on the display background. -background color Use color as the background color instead of the default (usually white but this depends on the image type) if you are transferring a monochrome image to a color display. -center Center the image on the base image loaded. If this is an option to the first image, and the -onroot option is specified, the image will be centered on the display background. -clip X,Y,W,H Clip the image before loading it. X and Y define the upper-left corner of the clip area, and W and H define the extents of the area. A zero value for W or H will be interpreted as the remainder of the image. Note that X and Y may be negative, and that W and H may be larger than the image. This causes a border to be placed around the image. The border color may be set with the -border option. -expand Forces the image (after all other optional processing) to be ex- panded into a True Color (24 bit) image. This is useful on systems which support 24 bit color, but where xli might choose to load a bitmap or 8 bit image into one of the other smaller depth visuals supported on your system. -foreground color Use color as the foreground color instead of black if you are trans- ferring a monochrome image to a color display. This can also be used to invert the foreground and background colors of a monochrome image. -halftone Force halftone dithering of a color image when displaying on a mono- chrome display. This option is ignored on monochrome images. This dithering algorithm blows an image up by sixteen times; if you don't like this, the -dither option will not blow the image up but will take longer to process and will be less accurate. -invert Inverts a monochrome image. This is shorthand for -foreground white -background black. -merge Merge this image onto the base image after local processing. The base image is considered to be the first image specified or the last image that was not preceded by -merge. If used in conjunction with -at and -clip, very complex images can be built up. Note that the final image will be the size of the first image, and that subsequent merged images overlay previous images. The final image size can be altered by using the -clip option on the base image to make it big- ger or smaller. This option is on by default for all images if the -onroot or -windowid options are specified. -name image_name Force the next argument to be treated as an image name. This is useful if the name of the image is -dither, for instance. -normalize Normalize a color image. -rotate degrees Rotate the image by degrees clockwise. The number must be a multi- ple of 90. EXAMPLES To load the rasterfile "my.image" onto the background and replicate it to fill the entire background: xli -onroot my.image To load a monochrome image "my.image" onto the background, using red as the foreground color, replicate the image, and overlay "another.image" onto it at coordinate (10,10): xli -foreground red my.image -at 10,10 another.image To center the rectangular region from 10 to 110 along the X axis and from 10 to the height of the image along the Y axis: xli -center -clip 10,10,100,0 my.image To double the size of an image: xli -zoom 200 my.image To halve the size of an image: xli -zoom 50 my.image To brighten a dark image: xli -brighten 150 my.image To darken a bright image: xli -brighten 50 my.image HINTS FOR GOOD IMAGE DISPLAYS Since images are likely to come from a variety of sources, they may be in a variety of aspect ratios which may not be supported by your display. The -xzoom and -yzoom options can be used to change the aspect ratio of an im- age before display. If you use these options, it is recommended that you increase the size of one of the dimensions instead of shrinking the other, since shrinking looses detail. For instance, many GIF and G3 FAX images have an X:Y ratio of about 2:1. You can correct this for viewing on a 1:1 display with either -xzoom 50 or -yzoom 200 (reduce X axis to 50% of its size and expand Y axis to 200% of its size, respectively) but the latter should be used so no detail is lost in the conversion. When zooming color images up you can reduce blockiness with -smooth. For zooms of 300% or more, I recommend two smoothing passes (although this can take awhile to do on slow machines). There will be a noticeable improve- ment in the image. You can perform image processing on a small portion of an image by loading the image more than once and using the -merge, -at and -clip options. Load the image, then merge it with a clipped, processed version of itself. To brighten a 100x100 rectangular portion of an image located at (50,50), for instance, you could type: xli my.image -merge -at 50,50 -clip 50,50,100,100 -brighten 150 my.im- age If you're using a display with a small colormap to display colorful images, try using the -gray option to convert to grayscale. XLITO xlito (XLoadImageTrailingOptions) is a separate utility that provides a file format independent way of marking image files with the appropriate op- tions to display correctly. It does this by appending to file a string specified by the user, marked with some magic numbers so that this string can be extracted by a program that knows where to look. Since almost all image files have some sort of image size specifier, the programs that load or manipulate these files do not look beyond the point at which they have read the image, so trailing information can safely be appended to the file. If appending this information causes trouble with other utilities, it can simply be deleted. xli will recognize these trailing options at the end of the image files, and will treat the embedded string as if it were a sequence of command line IMAGE OPTIONS. Any GLOBAL OPTIONS will be ignored, and the IMAGE OPTIONS are never propagated to other images. Trailing options can be examined with: xlito image_file ... Changed or added with: xlito -c "string of options" image_file And deleted with: xlito -d image_file ... For example, if you have a gif file fred.gif which is too dark and is the wrong aspect ratio, then it may need to be viewed with: xli -yzoom 130 -gamma 1.0 fred.gif to get it to look OK. These options can then be appended to the file by: xlito -c "-yzoom 130 -gamma 1.0" fred.gif and from then on xli will get the appropriate options from the image file itself. See the xlito manual entry for more details about this utility. PATHS AND EXTENSIONS The file ~/.xlirc (and optionally a system-wide file) defines the path and default extensions that xli will use when looking for images. This file can have two statements: "path=" and "extension=" (the equals signs must follow the word with no spaces between). Everything following the "path=" keyword will be prepended to the supplied image name if the supplied name does not specify an existing file. The paths will be searched in the order they are specified. Everything following the "extension=" keyword will be appended to the supplied image name if the supplied name does not specify an existing file. As with paths, these extensions will be searched in the order they are given. Comments are any portion of a line following a hash- mark (#). The following is a sample ~/.xlirc file: # paths to look for images in path= /usr/local/images /home/usr1/guest/madd/images /usr/include/X11/bitmaps # default extensions for images; .Z is automatic; scanned in order extension= .csun .msun .sun .face .xbm .bm Versions of xli prior to version 01, patchlevel 03 would load the system- wide file (if any), followed by the user's file. This behavior made it difficult for the user to configure her environment if she didn't want the default. Newer versions will ignore the system-wide file if a personal configuration file exists. IMAGE TYPES xli currently supports the following image types: CMU Window Manager raster files Faces Project images Fuzzy Bitmap (.fbm) images GEM bit images GIF images (Including GIF89a compatibility) G3 FAX images JFIF style jpeg images McIDAS areafiles MacPaint images Windows, OS/2 RLE Image Monochrome PC Paintbrush (.pcx) images Photograph on CD Image Portable Bitmap (.pbm, .pgm, .ppm) images Sun monochrome rasterfiles Sun color RGB rasterfiles Targa (.tga) files Utah Raster Toolkit (.rle) files X pixmap (.xpm) files (Version 1, 2C and 3) X10 bitmap files X11 bitmap files X Window Dump (except TrueColor and DirectColor) Normal, compact, and raw PBM images are supported. Both standard and run- length encoded Sun rasterfiles are supported. Any image whose name ends in .Z is assumed to be a compressed image and will be filtered through "uncom- press". If HAVE_GUNZIP is defined in the Makefile.std make file, then any image whose name ends in Any file that looks like a uuencoded file will be decoded automatically. AUTHORS The original Author is: Jim Frost Saber Software jimf@saber.com Version 1.16 of xli is derived from xloadimage 3.01 has been brought to you by: Graeme Gill graeme@labtam.oz.au Version 1.17 of xli is derived from xli 1.16 by smar@reptiles.org For a more-or-less complete list of other contributors (there are a lot of them), please see the README file enclosed with the distribution. FILES xli - the image loader and viewer xsetbg - pseudonym which quietly sets the background xview - pseudonym which views in a window xlito - the trailing options utility /usr/lib/X11/Xli - default system-wide configuration file ~/.xlirc - user's personal configuration file COPYRIGHT Copyright (c) 1989, 1990, 1991, 1992, 1993 Jim Frost, Graeme Gill and oth- ers. Xli is copywritten material with a very loose copyright allowing unlimited modification and distribution if the copyright notices are left intact. Various portions are copywritten by various people, but all use a modifica- tion of the MIT copyright notice. Please check the source for complete copyright information. The intent is to keep the source free, not to sti- fle its distribution, so please write to me if you have any questions. BUGS Zooming dithered images, especially downwards, is UGLY. Images can come in a variety of aspect ratios. Xli cannot detect what as- pect ratio the particular image being loaded has, nor the aspect ratio of the destination display, so images with differing aspect ratios from the destination display will appear distorted. The solution to this is to use xlito to append the appropriate options to the image file. See HINTS FOR GOOD IMAGE DISPLAYS and XLITO for more information. The GIF format allows more than one image to be stored in a single GIF file, but xli will only display the first. One of the pseudonyms for xli, xview, is the same name as Sun uses for their SunView-under-X package. This will be confusing if you're one of those poor souls who has to use Sun's XView. Some window managers do not correctly handle window size requests. In par- ticular, many versions of the twm window manager use the MaxSize hint in- stead of the PSize hint, causing images which are larger than the screen to display in a window larger than the screen, something which is normally avoided. Some versions of twm also ignore the MaxSize argument's real function, to limit the maximum size of the window, and allow the window to be resized larger than the image. If this happens, xli merely places the image in the upper-left corner of the window and uses the zero-value'ed pixel for any space which is not covered by the image. This behavior is less-than-graceful but so are window managers which are cruel enough to ig- nore such details. The order in which operations are performed on an image is independent of the order in which they were specified on the command line. Wherever pos- sible I tried to order operations in such a way as to look the best possi- ble (zooming before dithering, for instance) or to increase speed (zooming downward before compressing, for instance). Display Gamma should setable in the ~/.xlirc file. Embedded trailing options overide the command line Image Options. Command line options should really overide trailing options. 27 Jul 1994 XLI(1)
NAME | SYNOPSIS | DESCRIPTION | RESOURCE CLASS | GLOBAL OPTIONS | PERSISTENT IMAGE OPTIONS | LOCAL IMAGE OPTIONS | EXAMPLES | HINTS FOR GOOD IMAGE DISPLAYS | XLITO | PATHS AND EXTENSIONS | IMAGE TYPES | AUTHORS | FILES | COPYRIGHT | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=xli&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>