FreeBSD Manual Pages
zelta-options(7) System Manager's Manual zelta-options(7) NAME zelta-options - environment and policy options for Zelta behavior SYNOPSIS Environment variables and policy configuration options. DESCRIPTION Zelta's behavior can be modified through environment variables, com- mand-line arguments, and policy configuration files. This manual documents all available options and their effects. Options are set differently based on context: * Shell environment: Environment variables must be prefixed with ZELTA_ (e.g., ZELTA_DEPTH=2) * Environment file: In zelta.env, use KEY=value pairs (e.g., DEPTH=2) * Policy file: zelta policy additionally uses the YAML-like zelta.conf for granular settings per backup job with KEY: value pairs (e.g., DEPTH: 1) * Command-line arguments: Options map to double-dash arguments (e.g., --depth) For on/off variable assignments, use "1" for true and "0" for false. Option Hierarchy Options follow an override hierarchy to provide flexibility in all con- texts. 1. Defaults - Built-in defaults in the zelta controller script 2. zelta.env - System-wide environment file (default: /usr/lo- cal/etc/zelta/zelta.env) 3. zelta.conf - Policy configuration file (zelta policy only, default: /usr/local/etc/zelta/zelta.conf) 4. Environment variables - User environment (must prefix names with ZELTA_) 5. Command-line arguments - Highest priority, overrides all other sources For example, running zelta policy --no-snapshot will ensure the all config- ured backups will run without taking snapshots regardless of snapshot con- figuration in other contexts. SETUP AND ENVIRONMENT-ONLY OPTIONS The following options should be modified in the environment to ensure proper installation and startup of the zelta script. Typically, these should be defined in the user's shell rc script. In particular, ZELTA_AWK and ZELTA_ENV will be used prior to loading zelta.env so they must be ex- ported beforehand. ZELTA_AWK The awk executable. The default is the awk in the path. Example: ZELTA_AWK='mawk -Wi'. ZELTA_SHARE The location of Zelta assets including the AWK scripts and data files. The default is /usr/local/share/zelta. ZELTA_ETC The location of zelta.env and zelta.conf. The default is /usr/lo- cal/etc/zelta. ZELTA_ENV The exact path of zelta.env. ZELTA_DOC The location of Zelta's manpages. Default is unset, using the sys- tem-wide manual. LOGGING OPTIONS LOG_FILE Divert all output into the indicated file. LOG_LEVEL Specify a log level value 0-4: errors (0), warnings (1), notices (2, default), info (3, verbose), and debug (4). LOG_MODE Enable the specified log modes. Currently supported: `text' (de- fault) and `json' (zelta backup related verbs only). SSH OPTIONS REMOTE_COMMAND The remote shell command. Defaults to ssh. REMOTE_DEFAULT The default remote shell command used for misc operations which should prevent reading from stdin. Defaults to REMOTE_COMMAND -n (ssh -n). REMOTE_SEND The remote shell command used for zfs send. Defaults to REMOTE_COM- MAND (ssh). REMOTE_RECV The remote shell command used for zfs recv. Defaults to REMOTE_DE- FAULT (ssh -n). GENERAL OPTIONS DEPTH Limit the recursion depth of operations to the number of levels in- dicated. For example, a depth of 1 will only include the indicated source dataset. Has no effect with REPLICATE enabled. EXCLUDE Exclude datasets or source snapshots matching the specified exclu- sion pattern. See EXCLUSION PATTERNS below. ZELTA MATCH OPTIONS SCRIPTING_MODE Suppress column headers and separate columns with a single tab. Useful for parsing output in scripts. PARSABLE Output sizes in exact numbers instead of human-readable values like 1M. PROPLIST Specify a list of zelta match columns. See zelta-match(8) for more detail. LIST_WRITTEN Calculate data sizes for datasets and snapshots in the summary. En- abled by default. CHECK_TIME Calculate the time of each zfs list operation. ZFS SEND/RECEIVE OPTIONS SEND_OVERRIDE Override all zfs send options with those indicated. For precise and flexible configuration for different circumstances, use the SEND_* variables below instead. SEND_DEFAULT Options used for unencrypted filesystems and volumes. Defaults to -Lce. SEND_RAW Options used for encrypted datasets. Defaults to -Lw. SEND_NEW Additional option used for new datasets. Defaults to -p. SEND_INTR Toggle option to transmit intermediate snapshots (1, the default) or incremental (0). SEND_REPLICATE Options to use in zelta backup -R mode. Defaults to zfs send -LsRw. SEND_CHECK Attempt to drop unsupported zfs send options using a no-op test prior to replication. This feature is not fully implemented. RECV_OVERRIDE Override all zfs receive options with those indicated. For precise and flexible configuration, use the RECV_* variables instead. RECV_DEFAULT Default zfs recv options. Defaults to none. RECV_TOP Additional options for the top dataset during new (full) backup. Defaults to -o readonly=on. RECV_FS Additional options for filesystems during a new (full) backup. De- faults to -u -x mountpoint -o canmount=noauto. RECV_VOL Additional options for volumes new (full). Defaults to none. RECV_PROPS_ADD Add the list of `zfs recv -o' properties in the form property=value. See `zfs-receive(8)'. RECV_PROPS_DEL Add the list of `zfs recv -x' excluded properties. See `zfs-re- ceive(8)'. RECV_PARTIAL Additional options if RESUME is enabled. Defaults to -s. RECV_PREFIX Pipe output through the indicated command, such as dd sta- tus=progress. RESUME Enable (1, the default) or disable automatic resume of interrupted syncs. REPLICATION OPTIONS SNAP_NAME Specify a snapshot name. Use the form $(my_snapshot_program) to use a dynamically generated snapshot. The default is $(date -u +zelta_%Y-%m-%d_%H.%M.%S). SNAP_MODE Specify when to snapshot during a zelta backup operation. Options: 0 (never), IF_NEEDED (default, only if source has new data), or AL- WAYS. SYNC_DIRECTION If both endpoints are remote, use PULL (the default) or PUSH sync. If set to 0, traffic will stream through the local host. Note that this feature PUSH and PULL features require appropriate ssh configu- rations with keys properly installed and/or ssh agent forwarding en- abled. CLONE OPTIONS CLONE_DEFAULT Options for recursive cloning. Defaults to -po readonly=off. POLICY OPTIONS The following options only effect zelta policy operations. RETRY Retry failed syncs the indicated number of times. JOBS Run the indicated number of policy jobs concurrently, one for each Site in the configuration. BACKUP_ROOT The relative target path for backup jobs. For example, bkhost:tank/Backups would place backups below that dataset (if not overridden by policy). ARCHIVE_ROOT NOT YET IMPLEMENTED. The relative target path used for rotated clones. ADD_HOST_PREFIX Include the source hostname as a parent of the synced target. * Example: Source web1:sink/dataset with BACKUP_ROOT: tank/backups becomes tank/backups/web1/dataset. ADD_DATASET_PREFIX Similar to zfs recv -d, include the indicated number of parent dataset labels for the BACKUP_ROOT's (or specified target's) name. If set to -1 all labels up to the pool name will be attached to the target name. * Example: Source web1:sink/source/dataset with BACKUP_ROOT: tank/backups: * 0: tank/backups/dataset * 1: tank/backups/source/dataset * -1: tank/backups/sink/source/dataset * ADD_HOST_PREFIX stacks with ADD_DATASET_PREFIX. With both enabled, the hostname is prepended first: tank/backups/web1/source/dataset. EXCLUSION PATTERNS The EXCLUDE option, or the arguments --exclude or -X, contain a comma sepa- rated list of patterns to exclude datasets or source snapshots from opera- tions. Excluding a dataset will also exclude its children. Pattern Types Absolute Dataset Path Similar to zfs send --exclude, exclude the named source dataset from operations. Example: tank/vm/swap excludes that specific dataset. Relative Dataset Path Prefix with / to exclude the dataset suffix relative to the given dataset name. Example: Given the dataset sink/swap and the pattern /swap: sink/swap will be excluded, but sink/vm/swap will not be excluded. Relative Dataset Pattern Use glob-like matching of * (zero or more characters) or ? (single character). The pattern must start with `/' or '*' and must contain a `/'. Examples, given the given source of sink/data: * */swap would exclude sink/data/one/swap, sink/data/two/swap, and sink/data/swap * /*/swap would exclude sink/data/one/swap and sink/data/two/swap but not sink/data/swap * /vm-* would exclude sink/data/vm-one and its descendants, but not sink/data/vm/one * /test? would exclude sink/data/test1 but not sink/data/test15 Snapshot Name Match snapshots by name. Prefix with @ to indicate a snapshot. Example: @manual-backup excludes any snapshot named manual-backup. Snapshot Pattern Use glob-like matching of * (zero or more characters) or ? (single character). Snapshot names must begin with @. Examples: * @*_hourly excludes snapshots ending in _hourly * @snap-2024* excludes snapshots beginning with snap-2024 * @auto-*00?? excludes snapshots beginning with auto- and ending with 00 and two of any character Exclusions Quick Reference Pattern Type Example Matches ------------------------------------------------------------- Absolute dataset tank/vm/swap Exact dataset Relative dataset /tmp Top dataset ending in /tmp Relative dataset */swap Any dataset ending wildcard in /swap Snapshot name @manual-backup Exact snapshot name Snapshot wildcard @*_hourly Snapshots matching pattern Behavior Notes Datasets Excluding a dataset will also exclude its descendants. Snapshots For incremental replication, at least one common snapshot must remain be- tween source and target. Therefore, snapshot exclusion logic is only mean- ingful when applied to incremental source snapshots in incremental mode (SEND_INTR=0 or -i). For example, snapshot exclusion is useful for skip- ping hourly snapshots and but updating dailies. * Excluding a target's most recent snapshot will cause an incremental to fail * In intermediate mode (the default), intermediate snapshots will still be included * Bookmark exclusions are not supported as they serve only as replication sources EXAMPLES Set options via environment for a one-off run: export ZELTA_LOG_LEVEL=4 export ZELTA_REMOTE_COMMAND="ssh -p 2202" zelta backup pool/dataset remote:pool/backup Configure zelta.conf: # In zelta.conf, variables act as policy scopes but # use the same option names. LOG_MODE: json JOBS: 2 NYC1: BACKUP_ROOT: backuphost:tank/Backups RETRY: 3 SEE ALSO zelta(8), zelta-backup(8), zelta-clone(8), zelta-match(8), zelta-policy(8), zelta-rotate(8), zelta-sync(8), cron(8), ssh(1), zfs(8) AUTHORS Daniel J. Bell <bellhyve@zelta.space> WWW https://zelta.space zelta-options(7)
NAME | SYNOPSIS | DESCRIPTION | SETUP AND ENVIRONMENT-ONLY OPTIONS | LOGGING OPTIONS | SSH OPTIONS | GENERAL OPTIONS | ZELTA MATCH OPTIONS | ZFS SEND/RECEIVE OPTIONS | REPLICATION OPTIONS | CLONE OPTIONS | POLICY OPTIONS | EXCLUSION PATTERNS | EXAMPLES | SEE ALSO | AUTHORS | WWW
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=zelta-options&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>