SSH_CONFIG(5) File Formats Manual SSH_CONFIG(5) NAME ssh_config -- OpenSSH client configuration file DESCRIPTION ssh(1) obtains configuration data from the following sources in the follow- ing order: 1. command-line options 2. user's configuration file (~/.ssh/config) 3. system-wide configuration file (/etc/ssh/ssh_config) Unless noted otherwise, for each configuration directive, the first speci- fied value will be used. The configuration files may contain sections separated by conditional Host or Match directives. Configuration in these sections is only applied if the conditional directive that started the section matches. Since the first obtained value for each directive is used, more host-spe- cific declarations should be given near the beginning of the file, and gen- eral defaults at the end. The file contains directive/values pairs, one per line. Lines starting with `#' and empty lines are interpreted as comments. `#' outside of a quoted string may be used to add a comment to the end of a line. White- space at the beginning or end of lines is ignored. Values may optionally be enclosed in double quotes (") in order to represent arguments containing spaces. Configuration directives are separated from their values by whitespace or exactly one `=' character (which may be surrounded by whitespace); the lat- ter format is useful to avoid the need to quote whitespace when specifying configuration options using the ssh, scp, and sftp -o option. The possible keywords and their meanings are as follows (note that keywords are case-insensitive and arguments are case-sensitive): Host Restricts the following declarations (up to the next Host or Match keyword) to be only for those hosts that match one of the patterns given after the keyword. If more than one pattern is provided, they should be separated by whitespace. A single `*' as a pattern can be used to provide global defaults for all hosts. The host is usually the hostname argument given on the command line (see the CanonicalizeHostname keyword for exceptions). A pattern entry may be negated by prefixing it with an exclamation mark (`!'). If a negated entry is matched, then the Host entry is ignored, regardless of whether any other patterns on the line match. Negated matches are therefore useful to provide exceptions for wildcard matches. See "PATTERNS" for more information on patterns. Match Restricts the following declarations (up to the next Host or Match keyword) to be used only when the conditions following the Match keyword are satisfied. Match conditions are specified using one or more criteria or the single token all which always matches. The available criteria keywords are: canonical, final, exec, localnetwork, host, originalhost, tagged, command, user, localuser, and version. The all criteria must appear alone or immediately af- ter canonical or final. Other criteria may be combined arbitrar- ily. All criteria but all, canonical, and final require an argu- ment. Criteria may be negated by prepending an exclamation mark (`!'). The canonical keyword matches only when the configuration file is being re-parsed after hostname canonicalization (see the CanonicalizeHostname option). This may be useful to specify condi- tions that work with canonical host names only. The final keyword requests that the configuration be re-parsed (re- gardless of whether CanonicalizeHostname is enabled), and matches only during this final pass. If CanonicalizeHostname is enabled, then canonical and final match during the same pass. The exec keyword executes the specified command under the user's shell. If the command returns a zero exit status then the condi- tion is considered true. Commands containing whitespace characters must be quoted. Arguments to exec accept the tokens described in the "TOKENS" section. The localnetwork keyword matches the addresses of active local net- work interfaces against the supplied list of networks in CIDR for- mat. This may be convenient for varying the effective configura- tion on devices that roam between networks. Note that network ad- dress is not a trustworthy criteria in many situations (e.g. when the network is automatically configured using DHCP) and so caution should be applied if using it to control security-sensitive config- uration. The other keywords' criteria must be single entries or comma-sepa- rated lists and may use the wildcard and negation operators de- scribed in the "PATTERNS" section. The criteria for the host keyword are matched against the target hostname, after any substitution by the Hostname or CanonicalizeHostname options. The originalhost keyword matches against the hostname as it was specified on the command-line. The tagged keyword matches a tag name specified by a prior Tag di- rective or on the ssh(1) command-line using the -P flag. The command keyword matches the remote command that has been requested, or the subsystem name that is being invoked (e.g. "sftp" for an SFTP session). The empty string will match the case where a com- mand or tag has not been specified, i.e. `Match tag ""'. The version keyword matches against the version string of ssh(1), for example "OpenSSH_10.0". The user keyword matches against the target username on the remote host. The localuser keyword matches against the name of the local user running ssh(1) (this keyword may be useful in system-wide ssh_config files). Finally, the sessiontype keyword matches the requested session type, which may be one of shell for interactive sessions, exec for command execution sessions, subsystem for subsystem invocations such as sftp(1), or none for transport-only sessions, such as when ssh(1) is started with the -N flag. Include Include the specified configuration file(s). Multiple pathnames may be specified and each pathname may contain glob(7) wildcards, tokens as described in the "TOKENS" section, environment variables as described in the "ENVIRONMENT VARIABLES" section and, for user configurations, shell-like `~' references to user home directories. Wildcards will be expanded and processed in lexical order. Files without absolute paths are assumed to be in ~/.ssh if included in a user configuration file or /etc/ssh if included from the system configuration file. Include directive may appear inside a Match or Host block to perform conditional inclusion. AddKeysToAgent Specifies whether keys should be automatically added to a running ssh-agent(1). If this option is set to yes and a key is loaded from a file, the key and its passphrase are added to the agent with the default lifetime, as if by ssh-add(1). If this option is set to ask, ssh(1) will require confirmation using the SSH_ASKPASS pro- gram before adding a key (see ssh-add(1) for details). If this op- tion is set to confirm, each use of the key must be confirmed, as if the -c option was specified to ssh-add(1). If this option is set to no, no keys are added to the agent. Alternately, this op- tion may be specified as a time interval using the format described in the "TIME FORMATS" section of sshd_config(5) to specify the key's lifetime in ssh-agent(1), after which it will automatically be removed. The argument must be no (the default), yes, confirm (optionally followed by a time interval), ask or a time interval. AddressFamily Specifies which address family to use when connecting. Valid argu- ments are any (the default), inet (use IPv4 only), or inet6 (use IPv6 only). BatchMode If set to yes, user interaction such as password prompts and host key confirmation requests will be disabled. This option is useful in scripts and other batch jobs where no user is present to inter- act with ssh(1). The argument must be yes or no (the default). BindAddress Use the specified address on the local machine as the source ad- dress of the connection. Only useful on systems with more than one address. BindInterface Use the address of the specified interface on the local machine as the source address of the connection. CanonicalDomains When CanonicalizeHostname is enabled, this option specifies the list of domain suffixes in which to search for the specified desti- nation host. CanonicalizeFallbackLocal Specifies whether to fail with an error when hostname canonicaliza- tion fails. The default, yes, will attempt to look up the unquali- fied hostname using the system resolver's search rules. A value of no will cause ssh(1) to fail instantly if CanonicalizeHostname is enabled and the target hostname cannot be found in any of the do- mains specified by CanonicalDomains. CanonicalizeHostname Controls whether explicit hostname canonicalization is performed. The default, no, is not to perform any name rewriting and let the system resolver handle all hostname lookups. If set to yes then, for connections that do not use a ProxyCommand or ProxyJump, ssh(1) will attempt to canonicalize the hostname specified on the command line using the CanonicalDomains suffixes and CanonicalizePermittedCNAMEs rules. If CanonicalizeHostname is set to always, then canonicalization is applied to proxied connections too. If this option is enabled, then the configuration files are processed again using the new target name to pick up any new con- figuration in matching Host and Match stanzas. A value of none disables the use of a ProxyJump host. CanonicalizeMaxDots Specifies the maximum number of dot characters in a hostname before canonicalization is disabled. The default, 1, allows a single dot (i.e. hostname.subdomain). CanonicalizePermittedCNAMEs Specifies rules to determine whether CNAMEs should be followed when canonicalizing hostnames. The rules consist of one or more argu- ments of source_domain_list:target_domain_list, where source_domain_list is a pattern-list of domains that may follow CNAMEs in canonicalization, and target_domain_list is a pattern- list of domains that they may resolve to. For example, "*.a.example.com:*.b.example.com,*.c.example.com" will allow hostnames matching "*.a.example.com" to be canonicalized to names in the "*.b.example.com" or "*.c.example.com" domains. A single argument of "none" causes no CNAMEs to be considered for canonicalization. This is the default behaviour. CASignatureAlgorithms Specifies which algorithms are allowed for signing of certificates by certificate authorities (CAs). The default is: ssh-ed25519,ecdsa-sha2-nistp256, ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519@openssh.com, sk-ecdsa-sha2-nistp256@openssh.com, rsa-sha2-512,rsa-sha2-256, ssh-mldsa44-ed25519 If the specified list begins with a `+' character, then the speci- fied algorithms will be appended to the default set instead of re- placing them. If the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing them. ssh(1) will not accept host certificates signed using algorithms other than those specified. CertificateFile Specifies a file from which the user's certificate is read. A cor- responding private key must be provided separately in order to use this certificate either from an IdentityFile directive or -i flag to ssh(1), via ssh-agent(1), or via a PKCS11Provider or SecurityKeyProvider. Arguments to CertificateFile may use the tilde syntax to refer to a user's home directory, the tokens described in the "TOKENS" section and environment variables as described in the "ENVIRONMENT VARIABLES" section. It is possible to have multiple certificate files specified in con- figuration files; these certificates will be tried in sequence. Multiple CertificateFile directives will add to the list of cer- tificates used for authentication. ChannelTimeout Specifies whether and how quickly ssh(1) should close inactive channels. Timeouts are specified as one or more "type=interval" pairs separated by whitespace, where the "type" must be the special keyword "global" or a channel type name from the list below, op- tionally containing wildcard characters. The timeout value "interval" is specified in seconds or may use any of the units documented in the "TIME FORMATS" section. For exam- ple, "session=5m" would cause interactive sessions to terminate af- ter five minutes of inactivity. Specifying a zero value disables the inactivity timeout. The special timeout "global" applies to all active channels, taken together. Traffic on any active channel will reset the timeout, but when the timeout expires then all open channels will be closed. Note that this global timeout is not matched by wildcards and must be specified explicitly. The available channel type names include: agent-connection Open connections to ssh-agent(1). direct-tcpip, direct-streamlocal@openssh.com Open TCP or Unix socket (respectively) connections that have been established from an ssh(1) local forwarding, i.e. LocalForward or DynamicForward. forwarded-tcpip, forwarded-streamlocal@openssh.com Open TCP or Unix socket (respectively) connections that have been established to an sshd(8) listening on behalf of an ssh(1) remote forwarding, i.e. RemoteForward. session The interactive main session, including shell session, com- mand execution, scp(1), sftp(1), etc. tun-connection Open TunnelForward connections. x11-connection Open X11 forwarding sessions. Note that in all the above cases, terminating an inactive session does not guarantee to remove all resources associated with the ses- sion, e.g. shell processes or X11 clients relating to the session may continue to execute. Moreover, terminating an inactive channel or session does not nec- essarily close the SSH connection, nor does it prevent a client from requesting another channel of the same type. In particular, expiring an inactive forwarding session does not prevent another identical forwarding from being subsequently created. The default is not to expire channels of any type for inactivity. CheckHostIP If set to yes, ssh(1) will additionally check the host IP address in the known_hosts file. This allows it to detect if a host key changed due to DNS spoofing and will add addresses of destination hosts to ~/.ssh/known_hosts in the process, regardless of the set- ting of StrictHostKeyChecking. If the option is set to no (the de- fault), the check will not be executed. Ciphers Specifies the ciphers allowed and their order of preference. Mul- tiple ciphers must be comma-separated. If the specified list be- gins with a `+' character, then the specified ciphers will be ap- pended to the default set instead of replacing them. If the speci- fied list begins with a `-' character, then the specified ciphers (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' charac- ter, then the specified ciphers will be placed at the head of the default set. The supported ciphers are: 3des-cbc aes128-cbc aes192-cbc aes256-cbc aes128-ctr aes192-ctr aes256-ctr aes128-gcm@openssh.com aes256-gcm@openssh.com chacha20-poly1305@openssh.com The default is: chacha20-poly1305@openssh.com, aes128-gcm@openssh.com,aes256-gcm@openssh.com, aes128-ctr,aes192-ctr,aes256-ctr The list of available ciphers may also be obtained using "ssh -Q cipher". ClearAllForwardings Specifies that all local, remote, and dynamic port forwardings specified in the configuration files or on the command line be cleared. This option is primarily useful when used from the ssh(1) command line to clear port forwardings set in configuration files, and is automatically set by scp(1) and sftp(1). The argument must be yes or no (the default). Compression Specifies whether to use compression. The argument must be yes or no (the default). Compression applies to all traffic that flows over the SSH connec- tion. If untrusted traffic (such as an open port-forward) is per- mitted over the connection alongside trusted traffic, then compres- sion may leak information about session contents. For this reason, it is not recommended to enable compression for connections that share trusted and untrusted traffic. ConnectionAttempts Specifies the number of tries (one per second) to make before exit- ing. The argument must be an integer. This may be useful in scripts if the connection sometimes fails. The default is 1. ConnectTimeout Specifies the timeout (in seconds) used when connecting to the SSH server, instead of using the default system TCP timeout. This timeout is applied both to establishing the connection and to per- forming the initial SSH protocol handshake and key exchange. ControlMaster Enables the sharing of multiple sessions over a single network con- nection. When set to yes, ssh(1) will listen for connections on a control socket specified using the ControlPath argument. Addi- tional sessions can connect to this socket using the same ControlPath with ControlMaster set to no (the default). These ses- sions will try to reuse the master instance's network connection rather than initiating new ones, but will fall back to connecting normally if the control socket does not exist, or is not listening. Setting this to ask will cause ssh(1) to listen for control connec- tions, but require confirmation using ssh-askpass(1). If the ControlPath cannot be opened, ssh(1) will continue without connect- ing to a master instance. X11 and ssh-agent(1) forwarding is supported over these multiplexed connections, however the display and agent forwarded will be the one belonging to the master connection i.e. it is not possible to forward multiple displays or agents. Two additional options allow for opportunistic multiplexing: try to use a master connection but fall back to creating a new one if one does not already exist. These options are: auto and autoask. The latter requires confirmation like the ask option. ControlPath Specify the path to the control socket used for connection sharing as described in the ControlMaster section above or the string none to disable connection sharing. Arguments to ControlPath may use the tilde syntax to refer to a user's home directory, the tokens described in the "TOKENS" section and environment variables as de- scribed in the "ENVIRONMENT VARIABLES" section. It is recommended that any ControlPath used for opportunistic connection sharing in- clude at least %h, %p, and %r (or alternatively %C) and be placed in a directory that is not writable by other users. This ensures that shared connections are uniquely identified. ControlPersist When used in conjunction with ControlMaster, specifies that the master connection should remain open in the background (waiting for future client connections) after the initial client connection has been closed. If set to no (the default), then the master connec- tion will not be placed into the background, and will close as soon as the initial client connection is closed. If set to yes or 0, then the master connection will remain in the background indefi- nitely (until killed or closed via a mechanism such as the "ssh -O exit"). If set to a time in seconds, or a time in any of the for- mats documented in sshd_config(5), then the backgrounded master connection will automatically terminate after it has remained idle (with no client connections) for the specified time. DynamicForward Specifies that a TCP port on the local machine be forwarded over the secure channel, and the application protocol is then used to determine where to connect to from the remote machine. The argument must be [bind_address:]port. IPv6 addresses can be specified by enclosing addresses in square brackets. By default, the local port is bound in accordance with the GatewayPorts set- ting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of localhost indicates that the listening port be bound for local use only, while an empty address or `*' indicates that the port should be available from all interfaces. Currently the SOCKS4 and SOCKS5 protocols are supported, and ssh(1) will act as a SOCKS server. Multiple forwardings may be specified, and additional forwardings can be given on the command line. Only the superuser can forward privileged ports. EnableEscapeCommandline Enables the command line option in the EscapeChar menu for interac- tive sessions (default `~C'). By default, the command line is dis- abled. EnableSSHKeysign Setting this option to yes in the global client configuration file /etc/ssh/ssh_config enables the use of the helper program ssh- keysign(8) during HostbasedAuthentication. The argument must be yes or no (the default). This option should be placed in the non- hostspecific section. See ssh-keysign(8) for more information. EscapeChar Sets the escape character (default: `~'). The escape character can also be set on the command line. The argument should be a single character, `^' followed by a letter, or none to disable the escape character entirely (making the connection transparent for binary data). ExitOnForwardFailure Specifies whether ssh(1) should terminate the connection if it can- not set up all requested dynamic, tunnel, local, and remote port forwardings, (e.g. if either end is unable to bind and listen on a specified port). Note that ExitOnForwardFailure does not apply to connections made over port forwardings and will not, for example, cause ssh(1) to exit if TCP connections to the ultimate forwarding destination fail. The argument must be yes or no (the default). FingerprintHash Specifies the hash algorithm used when displaying key fingerprints. Valid options are: md5 and sha256 (the default). ForkAfterAuthentication Requests ssh to go to background just before command execution. This is useful if ssh is going to ask for passwords or passphrases, but the user wants it in the background. This implies the StdinNull configuration option being set to "yes". The recommended way to start X11 programs at a remote site is with something like ssh -f host xterm, which is the same as ssh host xterm if the ForkAfterAuthentication configuration option is set to "yes". If the ExitOnForwardFailure configuration option is set to "yes", then a client started with the ForkAfterAuthentication configura- tion option being set to "yes" will wait for all remote port for- wards to be successfully established before placing itself in the background. The argument to this keyword must be yes (same as the -f option) or no (the default). ForwardAgent Specifies whether the connection to the authentication agent (if any) will be forwarded to the remote machine. The argument may be yes, no (the default), an explicit path to an agent socket or the name of an environment variable (beginning with `$') in which to find the path. Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent's Unix-domain socket) can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however they can perform operations on the keys that en- able them to authenticate using the identities loaded into the agent. ForwardX11 Specifies whether X11 connections will be automatically redirected over the secure channel and DISPLAY set. The argument must be yes or no (the default). X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X11 authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring if the ForwardX11Trusted option is also enabled. ForwardX11Timeout Specify a timeout for untrusted X11 forwarding using the format de- scribed in the "TIME FORMATS" section of sshd_config(5). X11 con- nections received by ssh(1) after this time will be refused. Set- ting ForwardX11Timeout to zero will disable the timeout and permit X11 forwarding for the life of the connection. The default is to disable untrusted X11 forwarding after twenty minutes has elapsed. ForwardX11Trusted If this option is set to yes, remote X11 clients will have full ac- cess to the original X11 display. If this option is set to no (the default), remote X11 clients will be considered untrusted and prevented from stealing or tampering with data belonging to trusted X11 clients. Furthermore, the xauth(1) token used for the session will be set to expire after 20 minutes. Remote clients will be refused access after this time. See the X11 SECURITY extension specification for full details on the restrictions imposed on untrusted clients. GatewayPorts Specifies whether remote hosts are allowed to connect to local for- warded ports. By default, ssh(1) binds local port forwardings to the loopback address. This prevents other remote hosts from con- necting to forwarded ports. GatewayPorts can be used to specify that ssh should bind local port forwardings to the wildcard ad- dress, thus allowing remote hosts to connect to forwarded ports. The argument must be yes or no (the default). GlobalKnownHostsFile Specifies one or more files to use for the global host key data- base, separated by whitespace. The default is /etc/ssh/ssh_known_hosts, /etc/ssh/ssh_known_hosts2. GSSAPIAuthentication Specifies whether user authentication based on GSSAPI is allowed. The default is no. GSSAPIDelegateCredentials Forward (delegate) credentials to the server. The default is no. HashKnownHosts Indicates that ssh(1) should hash host names and addresses when they are added to ~/.ssh/known_hosts. These hashed names may be used normally by ssh(1) and sshd(8), but they do not visually re- veal identifying information if the file's contents are disclosed. The default is no. Note that existing names and addresses in known hosts files will not be converted automatically, but may be manu- ally hashed using ssh-keygen(1). HostbasedAcceptedAlgorithms Specifies the signature algorithms that will be used for hostbased authentication as a comma-separated list of patterns. Alternately if the specified list begins with a `+' character, then the speci- fied signature algorithms will be appended to the default set in- stead of replacing them. If the specified list begins with a `-' character, then the specified signature algorithms (including wild- cards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified signature algorithms will be placed at the head of the default set. The default for this option is: ssh-ed25519-cert-v01@openssh.com, ecdsa-sha2-nistp256-cert-v01@openssh.com, ecdsa-sha2-nistp384-cert-v01@openssh.com, ecdsa-sha2-nistp521-cert-v01@openssh.com, sk-ssh-ed25519-cert-v01@openssh.com, sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, rsa-sha2-512-cert-v01@openssh.com, rsa-sha2-256-cert-v01@openssh.com, ssh-mldsa44-ed25519-cert, ssh-ed25519, ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519@openssh.com, sk-ecdsa-sha2-nistp256@openssh.com, webauthn-sk-ecdsa-sha2-nistp256@openssh.com, rsa-sha2-512,rsa-sha2-256, ssh-mldsa44-ed25519 The -Q option of ssh(1) may be used to list supported signature al- gorithms. This was formerly named HostbasedKeyTypes. HostbasedAuthentication Specifies whether to try rhosts based authentication with public key authentication. The argument must be yes or no (the default). HostKeyAlgorithms Specifies the host key signature algorithms that the client wants to use in order of preference. Alternately if the specified list begins with a `+' character, then the specified signature algo- rithms will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified signature algorithms (including wildcards) will be re- moved from the default set instead of replacing them. If the spec- ified list begins with a `^' character, then the specified signa- ture algorithms will be placed at the head of the default set. The default for this option is: ssh-ed25519-cert-v01@openssh.com, ecdsa-sha2-nistp256-cert-v01@openssh.com, ecdsa-sha2-nistp384-cert-v01@openssh.com, ecdsa-sha2-nistp521-cert-v01@openssh.com, sk-ssh-ed25519-cert-v01@openssh.com, sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, rsa-sha2-512-cert-v01@openssh.com, rsa-sha2-256-cert-v01@openssh.com, ssh-mldsa44-ed25519-cert, ssh-ed25519, ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ecdsa-sha2-nistp256@openssh.com, webauthn-sk-ecdsa-sha2-nistp256@openssh.com sk-ssh-ed25519@openssh.com, rsa-sha2-512,rsa-sha2-256, ssh-mldsa44-ed25519 If hostkeys are known for the destination host then this default is modified to prefer their algorithms. The list of available signature algorithms may also be obtained us- ing "ssh -Q HostKeyAlgorithms". HostKeyAlias Specifies an alias that should be used instead of the real host name when looking up or saving the host key in the host key data- base files and when validating host certificates. This option is useful for tunneling SSH connections or for multiple servers run- ning on a single host. Hostname Specifies the real host name to log into. This can be used to specify nicknames or abbreviations for hosts. Arguments to Hostname accept the tokens described in the "TOKENS" section. Nu- meric IP addresses are also permitted (both on the command line and in Hostname specifications). The default is the name given on the command line. IdentitiesOnly Specifies that ssh(1) should only use the configured authentication identity and certificate files (either the default files, or those explicitly configured in the ssh_config files or passed on the ssh(1) command-line), even if ssh-agent(1) or a PKCS11Provider or SecurityKeyProvider offers more identities. The argument to this keyword must be yes or no (the default). This option is intended for situations where ssh-agent offers many different identities. IdentityAgent Specifies the Unix-domain socket used to communicate with the au- thentication agent. This option overrides the SSH_AUTH_SOCK environment variable and can be used to select a specific agent. Setting the socket name to none disables the use of an authentication agent. If the string "SSH_AUTH_SOCK" is specified, the location of the socket will be read from the SSH_AUTH_SOCK environment variable. Otherwise if the specified value begins with a `$' character, then it will be treated as an environment variable containing the location of the socket. Arguments to IdentityAgent may use the tilde syntax to refer to a user's home directory, the tokens described in the "TOKENS" section and environment variables as described in the "ENVIRONMENT VARIABLES" section. IdentityFile Specifies a file from which the user's ECDSA, authenticator-hosted ECDSA, Ed25519, authenticator-hosted Ed25519 or RSA authentication identity is read. You can also specify a public key file to use the corresponding private key that is loaded in ssh-agent(1) when the private key file is not present locally. The default is ~/.ssh/id_rsa, ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519, ~/.ssh/id_ed25519_sk and ~/.ssh/id_mldsa44_ed25519. Additionally, any identities repre- sented by the authentication agent will be used for authentication unless IdentitiesOnly is set. If no certificates have been explic- itly specified by CertificateFile, ssh(1) will try to load certifi- cate information from the filename obtained by appending -cert.pub to the path of a specified IdentityFile. Arguments to IdentityFile may use the tilde syntax to refer to a user's home directory or the tokens described in the "TOKENS" sec- tion. Alternately an argument of none may be used to indicate no identity files should be loaded. It is possible to have multiple identity files specified in config- uration files; all these identities will be tried in sequence. Multiple IdentityFile directives will add to the list of identities tried (this behaviour differs from that of other configuration di- rectives). IdentityFile may be used in conjunction with IdentitiesOnly to se- lect which identities in an agent are offered during authentica- tion. IdentityFile may also be used in conjunction with CertificateFile in order to provide any certificate also needed for authentication with the identity. IgnoreUnknown Specifies a pattern-list of unknown options to be ignored if they are encountered in configuration parsing. This may be used to sup- press errors if ssh_config contains options that are unrecognised by ssh(1). It is recommended that IgnoreUnknown be listed early in the configuration file as it will not be applied to unknown options that appear before it. IPQoS Specifies the Differentiated Services Field Codepoint (DSCP) value for connections. Accepted values are af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef, le, a numeric value, or none to use the operat- ing system default. This option may take one or two arguments, separated by whitespace. If one argument is specified, it is used as the packet class unconditionally. If two values are specified, the first is automatically selected for interactive sessions and the second for non-interactive sessions. The default is ef (Expe- dited Forwarding) for interactive sessions and none (the operating system default) for non-interactive sessions. KbdInteractiveAuthentication Specifies whether to use keyboard-interactive authentication. The argument to this keyword must be yes (the default) or no. ChallengeResponseAuthentication is a deprecated alias for this. KbdInteractiveDevices Specifies the list of methods to use in keyboard-interactive au- thentication. Multiple method names must be comma-separated. The default is to use the server specified list. The methods available vary depending on what the server supports. For an OpenSSH server, it may be zero or more of: bsdauth and pam. KexAlgorithms Specifies the permitted KEX (Key Exchange) algorithms that will be used and their preference order. The selected algorithm will be the first algorithm in this list that the server also supports. Multiple algorithms must be comma-separated. If the specified list begins with a `+' character, then the speci- fied algorithms will be appended to the default set instead of re- placing them. If the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified algorithms will be placed at the head of the default set. The default is: mlkem768x25519-sha256, sntrup761x25519-sha512,sntrup761x25519-sha512@openssh.com, curve25519-sha256,curve25519-sha256@libssh.org, ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521, diffie-hellman-group-exchange-sha256, diffie-hellman-group16-sha512, diffie-hellman-group18-sha512, diffie-hellman-group14-sha256 The list of supported key exchange algorithms may also be obtained using "ssh -Q kex". KnownHostsCommand Specifies a command to use to obtain a list of host keys, in addi- tion to those listed in UserKnownHostsFile and GlobalKnownHostsFile. This command is executed after the files have been read. It may write host key lines to standard output in identical format to the usual files (described in the "VERIFYING HOST KEYS" section in ssh(1)). Arguments to KnownHostsCommand ac- cept the tokens described in the "TOKENS" section. The command may be invoked multiple times per connection: once when preparing the preference list of host key algorithms to use, again to obtain the host key for the requested host name and, if CheckHostIP is en- abled, one more time to obtain the host key matching the server's address. If the command exits abnormally or returns a non-zero exit status then the connection is terminated. LocalCommand Specifies a command to execute on the local machine after success- fully connecting to the server. The command string extends to the end of the line, and is executed with the user's shell. Arguments to LocalCommand accept the tokens described in the "TOKENS" sec- tion. The command is run synchronously and does not have access to the session of the ssh(1) that spawned it. It should not be used for interactive commands. This directive is ignored unless PermitLocalCommand has been en- abled. LocalForward Specifies that a TCP port or Unix-domain socket on the local ma- chine be forwarded over the secure channel to the specified host and port (or Unix-domain socket) from the remote machine. For a TCP port, the first argument must be [bind_address:]port or a Unix domain socket path. The second argument is the destination and may be host:hostport or a Unix domain socket path if the remote host supports it. IPv6 addresses can be specified by enclosing addresses in square brackets. If either argument contains a '/' in it, that argument will be in- terpreted as a Unix-domain socket (on the corresponding host) rather than a TCP port. Multiple forwardings may be specified, and additional forwardings can be given on the command line. Only the superuser can forward privileged ports. By default, the local port is bound in accor- dance with the GatewayPorts setting. However, an explicit bind_address may be used to bind the connection to a specific ad- dress. The bind_address of localhost indicates that the listening port be bound for local use only, while an empty address or `*' in- dicates that the port should be available from all interfaces. Unix domain socket paths may use the tokens described in the "TOKENS" section and environment variables as described in the "ENVIRONMENT VARIABLES" section. LogLevel Gives the verbosity level that is used when logging messages from ssh(1). The possible values are: QUIET, FATAL, ERROR, INFO, VER- BOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is INFO. DE- BUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify higher levels of verbose output. LogVerbose Specify one or more overrides to LogLevel. An override consists of one or more pattern lists that matches the source file, function and line number to force detailed logging for. For example, an override pattern of: kex.c:*:1000,*:kex_exchange_identification():*,packet.c:* would enable detailed logging for line 1000 of kex.c, everything in the kex_exchange_identification() function, and all code in the packet.c file. This option is intended for debugging and no over- rides are enabled by default. MACs Specifies the MAC (message authentication code) algorithms in order of preference. The MAC algorithm is used for data integrity pro- tection. Multiple algorithms must be comma-separated. If the specified list begins with a `+' character, then the specified al- gorithms will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing them. If the specified list be- gins with a `^' character, then the specified algorithms will be placed at the head of the default set. The algorithms that contain "-etm" calculate the MAC after encryp- tion (encrypt-then-mac). These are considered safer and their use recommended. The default is: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com, hmac-sha1-etm@openssh.com, umac-64@openssh.com,umac-128@openssh.com, hmac-sha2-256,hmac-sha2-512,hmac-sha1 The list of available MAC algorithms may also be obtained using "ssh -Q mac". NoHostAuthenticationForLocalhost Disable host authentication for localhost (loopback addresses). The argument to this keyword must be yes or no (the default). NumberOfPasswordPrompts Specifies the number of password prompts before giving up. The ar- gument to this keyword must be an integer. The default is 3. ObscureKeystrokeTiming Specifies whether ssh(1) should try to obscure inter-keystroke tim- ings from passive observers of network traffic. If enabled, then for interactive sessions, ssh(1) will send keystrokes at fixed in- tervals of a few tens of milliseconds and will send fake keystroke packets for some time after typing ceases. The argument to this keyword must be yes, no or an interval specifier of the form interval:milliseconds (e.g. interval:80 for 80 milliseconds). The default is to obscure keystrokes using a 20ms packet interval. Note that smaller intervals will result in higher fake keystroke packet rates. PasswordAuthentication Specifies whether to use password authentication. The argument to this keyword must be yes (the default) or no. PermitLocalCommand Allow local command execution via the LocalCommand option or using the !command escape sequence in ssh(1). The argument must be yes or no (the default). PermitRemoteOpen Specifies the destinations to which remote TCP port forwarding is permitted when RemoteForward is used as a SOCKS proxy. The for- warding specification must be one of the following forms: PermitRemoteOpen host:port PermitRemoteOpen IPv4_addr:port PermitRemoteOpen [IPv6_addr]:port Multiple forwards may be specified by separating them with white- space. An argument of any can be used to remove all restrictions and permit any forwarding requests. An argument of none can be used to prohibit all forwarding requests. The wildcard `*' can be used for host or port to allow all hosts or ports respectively. Otherwise, no pattern matching or address lookups are performed on supplied names. PKCS11Provider Specifies which PKCS#11 provider to use or none to indicate that no provider should be used (the default). The argument to this key- word is a path to the PKCS#11 shared library ssh(1) should use to communicate with a PKCS#11 token providing keys for user authenti- cation. Port Specifies the port number to connect on the remote host. The de- fault is 22. PreferredAuthentications Specifies the order in which the client should try authentication methods. This allows a client to prefer one method (e.g. keyboard-interactive) over another method (e.g. password). The de- fault is: gssapi-with-mic,hostbased,publickey, keyboard-interactive,password ProxyCommand Specifies the command to use to connect to the server. The command string extends to the end of the line, and is executed using the user's shell `exec' directive to avoid a lingering shell process. Arguments to ProxyCommand accept the tokens described in the "TOKENS" section. The command can be basically anything, and should read from its standard input and write to its standard out- put. It should eventually connect an sshd(8) server running on some machine, or execute sshd -i somewhere. Host key management will be done using the Hostname of the host being connected (de- faulting to the name typed by the user). Setting the command to none disables this option entirely. Note that CheckHostIP is not available for connections using a proxy command. This directive is useful in conjunction with nc(1) and its proxy support. For example, the following directive would connect via an HTTP proxy at 192.0.2.0: ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p ProxyJump Specifies one or more jump proxies as either [user@]host[:port] or an ssh URI. Multiple proxies may be separated by comma characters and will be visited sequentially. Setting this option will cause ssh(1) to connect to the target host by first making an ssh(1) con- nection to the specified ProxyJump host and then establishing a TCP forwarding to the ultimate target from there. Setting the host to none disables this option entirely. Note that this option will compete with the ProxyCommand option - whichever is specified first will prevent later instances of the other from taking effect. Note also that the configuration for the destination host (either supplied via the command-line or the configuration file) is not generally applied to jump hosts. ~/.ssh/config should be used if specific configuration is required for jump hosts. ProxyUseFdpass Specifies that ProxyCommand will pass a connected file descriptor back to ssh(1) instead of continuing to execute and pass data. The default is no. PubkeyAcceptedAlgorithms Specifies the signature algorithms that will be used for public key authentication as a comma-separated list of patterns. If the spec- ified list begins with a `+' character, then the algorithms after it will be appended to the default instead of replacing it. If the specified list begins with a `-' character, then the specified al- gorithms (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified algorithms will be placed at the head of the default set. The default for this option is: ssh-ed25519-cert-v01@openssh.com, ecdsa-sha2-nistp256-cert-v01@openssh.com, ecdsa-sha2-nistp384-cert-v01@openssh.com, ecdsa-sha2-nistp521-cert-v01@openssh.com, sk-ssh-ed25519-cert-v01@openssh.com, sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, webauthn-sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, rsa-sha2-512-cert-v01@openssh.com, rsa-sha2-256-cert-v01@openssh.com, ssh-mldsa44-ed25519-cert, ssh-ed25519, ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519@openssh.com, sk-ecdsa-sha2-nistp256@openssh.com, webauthn-sk-ecdsa-sha2-nistp256@openssh.com, rsa-sha2-512,rsa-sha2-256, ssh-mldsa44-ed25519 The list of available signature algorithms may also be obtained us- ing "ssh -Q PubkeyAcceptedAlgorithms". PubkeyAuthentication Specifies whether to try public key authentication. The argument to this keyword must be yes (the default), no, unbound or host-bound. The final two options enable public key authentication while respectively disabling or enabling the OpenSSH host-bound au- thentication protocol extension required for restricted ssh- agent(1) forwarding. RefuseConnection Allows a connection to be refused by the configuration file. If this option is specified, then ssh(1) will terminate immediately before attempting to connect to the remote host, display an error message that contains the argument to this keyword and return a non-zero exit status. This option may be useful to express re- minders or warnings to the user via ssh_config. RekeyLimit Specifies the maximum amount of data that may be transmitted or re- ceived before the session key is renegotiated, optionally followed by a maximum amount of time that may pass before the session key is renegotiated. The first argument is specified in bytes and may have a suffix of `K', `M', or `G' to indicate Kilobytes, Megabytes, or Gigabytes, respectively. The default is between `1G' and `4G', depending on the cipher. The optional second value is specified in seconds and may use any of the units documented in the TIME FORMATS section of sshd_config(5). The default value for RekeyLimit is default none, which means that rekeying is performed after the ci- pher's default amount of data has been sent or received and no time based rekeying is done. RemoteCommand Specifies a command to execute on the remote machine after success- fully connecting to the server. The command string extends to the end of the line, and is executed with the user's shell. Arguments to RemoteCommand accept the tokens described in the "TOKENS" sec- tion. RemoteForward Specifies that a TCP port or Unix-domain socket on the remote ma- chine be forwarded over the secure channel. The remote port may either be forwarded to a specified host and port or Unix-domain socket from the local machine, or may act as a SOCKS 4/5 proxy that allows a remote client to connect to arbitrary destinations from the local machine. The first argument is the listening specifica- tion and may be [bind_address:]port or, if the remote host supports it, a Unix domain socket path. If forwarding to a specific desti- nation then the second argument must be host:hostport or a Unix do- main socket path, otherwise if no destination argument is specified then the remote forwarding will be established as a SOCKS proxy. When acting as a SOCKS proxy, the destination of the connection can be restricted by PermitRemoteOpen. IPv6 addresses can be specified by enclosing addresses in square brackets. If either argument contains a '/' in it, that argument will be in- terpreted as a Unix-domain socket (on the corresponding host) rather than a TCP port. Multiple forwardings may be specified, and additional forwardings can be given on the command line. Privileged ports can be for- warded only when logging in as root on the remote machine. Unix domain socket paths may use the tokens described in the "TOKENS" section and environment variables as described in the "ENVIRONMENT VARIABLES" section. If the port argument is 0, the listen port will be dynamically al- located on the server and reported to the client at run time. If the bind_address is not specified, the default is to only bind to loopback addresses. If the bind_address is `*' or an empty string, then the forwarding is requested to listen on all inter- faces. Specifying a remote bind_address will only succeed if the server's GatewayPorts option is enabled (see sshd_config(5)). RequestTTY Specifies whether to request a pseudo-tty for the session. The ar- gument may be one of: no (never request a TTY), yes (always request a TTY when standard input is a TTY), force (always request a TTY) or auto (request a TTY when opening a login session). This option mirrors the -t and -T flags for ssh(1). RequiredRSASize Specifies the minimum RSA key size (in bits) that ssh(1) will ac- cept. User authentication keys smaller than this limit will be ig- nored. Servers that present host keys smaller than this limit will cause the connection to be terminated. The default is 1024 bits. Note that this limit may only be raised from the default. RevokedHostKeys Specifies revoked host public keys. Keys listed in this file will be refused for host authentication. Note that if this file does not exist or is not readable, then host authentication will be re- fused for all hosts. Keys may be specified as a text file, listing one public key per line, or as an OpenSSH Key Revocation List (KRL) as generated by ssh-keygen(1). For more information on KRLs, see the KEY REVOCATION LISTS section in ssh-keygen(1). Arguments to RevokedHostKeys may use the tilde syntax to refer to a user's home directory, the tokens described in the "TOKENS" section and envi- ronment variables as described in the "ENVIRONMENT VARIABLES" sec- tion. SecurityKeyProvider Specifies a path to a library that will be used when loading any FIDO authenticator-hosted keys, overriding the default of using the built-in USB HID support. If the specified value begins with a `$' character, then it will be treated as an environment variable containing the path to the li- brary. SendEnv Specifies what variables from the local environ(7) should be sent to the server. The server must also support it, and the server must be configured to accept these environment variables. Note that the TERM environment variable is always sent whenever a pseudo-terminal is requested as it is required by the protocol. Refer to AcceptEnv in sshd_config(5) for how to configure the server. Variables are specified by name, which may contain wild- card characters. Multiple environment variables may be separated by whitespace or spread across multiple SendEnv directives. See "PATTERNS" for more information on patterns. It is possible to clear previously set SendEnv variable names by prefixing patterns with -. The default is not to send any environ- ment variables. ServerAliveCountMax Sets the number of server alive messages (see below) which may be sent without ssh(1) receiving any messages back from the server. If this threshold is reached while server alive messages are being sent, ssh will disconnect from the server, terminating the session. It is important to note that the use of server alive messages is very different from TCPKeepAlive (below). The server alive mes- sages are sent through the encrypted channel and therefore will not be spoofable. The TCP keepalive option enabled by TCPKeepAlive is spoofable. The server alive mechanism is valuable when the client or server depend on knowing when a connection has become unrespon- sive. The default value is 3. If, for example, ServerAliveInterval (see below) is set to 15 and ServerAliveCountMax is left at the default, if the server becomes unresponsive, ssh will disconnect after ap- proximately 45 seconds. ServerAliveInterval Sets a timeout interval in seconds after which if no data has been received from the server, ssh(1) will send a message through the encrypted channel to request a response from the server. The de- fault is 0, indicating that these messages will not be sent to the server. SessionType May be used to either request invocation of a subsystem on the re- mote system, or to prevent the execution of a remote command at all. The latter is useful for just forwarding ports. The argument to this keyword must be none (same as the -N option), subsystem (same as the -s option) or default (shell or command execution). SetEnv Directly specify one or more environment variables and their con- tents to be sent to the server in the form "NAME=VALUE". Similarly to SendEnv, with the exception of the TERM variable, the server must be prepared to accept the environment variable. The "VALUE" may use the tokens described in the "TOKENS" section and environment variables as described in the "ENVIRONMENT VARIABLES" section. StdinNull Redirects stdin from /dev/null (actually, prevents reading from stdin). Either this or the equivalent -n option must be used when ssh is run in the background. The argument to this keyword must be yes (same as the -n option) or no (the default). StreamLocalBindMask Sets the octal file creation mode mask (umask) used when creating a Unix-domain socket file for local or remote port forwarding. This option is only used for port forwarding to a Unix-domain socket file. The default value is 0177, which creates a Unix-domain socket file that is readable and writable only by the owner. Note that not all operating systems honor the file mode on Unix-domain socket files. StreamLocalBindUnlink Specifies whether to remove an existing Unix-domain socket file for local or remote port forwarding before creating a new one. If the socket file already exists and StreamLocalBindUnlink is not en- abled, ssh will be unable to forward the port to the Unix-domain socket file. This option is only used for port forwarding to a Unix-domain socket file. The argument must be yes or no (the default). StrictHostKeyChecking If this flag is set to yes, ssh(1) will never automatically add host keys to the ~/.ssh/known_hosts file, and refuses to connect to hosts whose host key has changed. This provides maximum protection against man-in-the-middle (MITM) attacks, though it can be annoying when the /etc/ssh/ssh_known_hosts file is poorly maintained or when connections to new hosts are frequently made. This option forces the user to manually add all new hosts. If this flag is set to accept-new then ssh will automatically add new host keys to the user's known_hosts file, but will not permit connections to hosts with changed host keys. If this flag is set to no or off, ssh will automatically add new host keys to the user known hosts files and allow connections to hosts with changed hostkeys to proceed, subject to some restrictions. If this flag is set to ask (the default), new host keys will be added to the user known host files only after the user has confirmed that is what they really want to do, and ssh will refuse to connect to hosts whose host key has changed. The host keys of known hosts will be verified automatically in all cases. SyslogFacility Gives the facility code that is used when logging messages from ssh(1). The possible values are: DAEMON, USER, AUTH, LOCAL0, LO- CAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. The default is USER. TCPKeepAlive Specifies whether the system should send keepalive messages on TCP sockets it has opened. If they are sent, failure of the connection or crash of one of the endpoints may be more promptly detected. However, this means that connections may terminate if the connec- tion is suffers a transient disruption. The argument must be transport to enable TCP keepalive messages on the SSH transport connection to the server, yes which is an alias for transport, all to enable TCP keepalive messages on all sockets opened by ssh(1), including sockets created for X11 or port for- warding, or no to disable TCP keepalive messages. The default is transport. See also ServerAliveInterval for a more robust connection failure detection mechanism that works at the SSH protocol level. Tag Specify a configuration tag name that may be later used by a Match directive to select a block of configuration. Tunnel Request tun(4) device forwarding between the client and the server. The argument must be yes, point-to-point (layer 3), ethernet (layer 2), or no (the default). Specifying yes requests the default tun- nel mode, which is point-to-point. TunnelDevice Specifies the tun(4) devices to open on the client (local_tun) and the server (remote_tun). The argument must be local_tun[:remote_tun]. The devices may be specified by numerical ID or the keyword any, which uses the next available tunnel device. If remote_tun is not specified, it de- faults to any. The default is any:any. UpdateHostKeys Specifies whether ssh(1) should accept notifications of additional hostkeys from the server sent after authentication has completed and add them to UserKnownHostsFile. The argument must be yes, no or ask. This option allows learning alternate hostkeys for a server and supports graceful key rotation by allowing a server to send replacement public keys before old ones are removed. Additional hostkeys are only accepted if the key used to authenti- cate the host was already trusted or explicitly accepted by the user, the host was authenticated via UserKnownHostsFile (i.e. not GlobalKnownHostsFile) and the host was authenticated using a plain key and not a certificate. UpdateHostKeys is enabled by default if the user has not overridden the default UserKnownHostsFile setting and has not enabled VerifyHostKeyDNS, otherwise UpdateHostKeys will be set to no. If UpdateHostKeys is set to ask, then the user is asked to confirm the modifications to the known_hosts file. Confirmation is cur- rently incompatible with ControlPersist, and will be disabled if it is enabled. Presently, only sshd(8) from OpenSSH 6.8 and greater support the "hostkeys@openssh.com" protocol extension used to inform the client of all the server's hostkeys. User Specifies the user to log in as. This can be useful when a differ- ent user name is used on different machines. This saves the trou- ble of having to remember to give the user name on the command line. Arguments to User may use the tokens described in the "TOKENS" section (with the exception of %r and %C) and environment variables as described in the "ENVIRONMENT VARIABLES" section. UserKnownHostsFile Specifies one or more files to use for the user host key database, separated by whitespace. Each filename may use tilde notation to refer to the user's home directory, the tokens described in the "TOKENS" section and environment variables as described in the "ENVIRONMENT VARIABLES" section. A value of none causes ssh(1) to ignore any user-specific known hosts files. The default is ~/.ssh/known_hosts, ~/.ssh/known_hosts2. VerifyHostKeyDNS Specifies whether to verify the remote key using DNS and SSHFP re- source records. If this option is set to yes, the client will im- plicitly trust keys that match a secure fingerprint from DNS. In- secure fingerprints will be handled as if this option was set to ask. If this option is set to ask, information on fingerprint match will be displayed, but the user will still need to confirm new host keys according to the StrictHostKeyChecking option. The default is no. See also "VERIFYING HOST KEYS" in ssh(1). VersionAddendum Optionally specifies additional text to append to the SSH protocol banner sent by the client upon connection. The default is none. VisualHostKey If this flag is set to yes, an ASCII art representation of the re- mote host key fingerprint is printed in addition to the fingerprint string at login and for unknown host keys. If this flag is set to no (the default), no fingerprint strings are printed at login and only the fingerprint string will be printed for unknown host keys. WarnWeakCrypto controls whether the user is warned when the cryptographic algo- rithms negotiated for the connection are weak or otherwise recom- mended against. Warnings may be disabled by turning off a specific warning or by disabling all warnings. Warnings about connections that don't use a post-quantum key exchange may be disabled using the no-pq-kex flag. no will disable all warnings. The default, equivalent to yes, is to enable all warnings. XAuthLocation Specifies the full pathname of the xauth(1) program. The default is /usr/X11R6/bin/xauth. PATTERNS A pattern consists of zero or more non-whitespace characters, `*' (a wild- card that matches zero or more characters), or `?' (a wildcard that matches exactly one character). For example, to specify a set of declarations for any host in the ".co.uk" set of domains, the following pattern could be used: Host *.co.uk The following pattern would match any host in the 192.168.0.[0-9] network range: Host 192.168.0.? A pattern-list is a comma-separated list of patterns. Patterns within pat- tern-lists may be negated by preceding them with an exclamation mark (`!'). For example, to allow a key to be used from anywhere within an organization except from the "dialup" pool, the following entry (in authorized_keys) could be used: from="!*.dialup.example.com,*.example.com" Note that a negated match will never produce a positive result by itself. For example, attempting to match "host3" against the following pattern-list will fail: from="!host1,!host2" The solution here is to include a term that will yield a positive match, such as a wildcard: from="!host1,!host2,*" TOKENS Arguments to some keywords can make use of tokens, which are expanded at runtime. Tokens are expanded without quoting or escaping of shell charac- ters. It is the user's responsibility to ensure they are safe in the con- text of their use. The supported tokens in ssh_config are: %% A literal `%'. %C Hash of %l%h%p%r%j. %d Local user's home directory. %f The fingerprint of the server's host key. %H The known_hosts hostname or address that is being searched for. %h The remote hostname. %I A string describing the reason for a KnownHostsCommand execu- tion: either ADDRESS when looking up a host by address (only when CheckHostIP is enabled), HOSTNAME when searching by host- name, or ORDER when preparing the host key algorithm preference list to use for the destination host. %i The local user ID. %j The contents of the ProxyJump option, or the empty string if this option is unset. %K The base64 encoded host key. %k The host key alias if specified, otherwise the original remote hostname given on the command line. %L The local hostname. %l The local hostname, including the domain name. %n The original remote hostname, as given on the command line. %p The remote port. %r The remote username. %T The local tun(4) or tap(4) network interface assigned if tunnel forwarding was requested, or "NONE" otherwise. %t The type of the server host key, e.g. ssh-ed25519. %u The local username. CertificateFile, ControlPath, IdentityAgent, IdentityFile, Include, KnownHostsCommand, LocalForward, Match exec, RemoteCommand, RemoteForward, RevokedHostKeys, UserKnownHostsFile and VersionAddendum accept the tokens %%, %C, %d, %h, %i, %j, %k, %L, %l, %n, %p, %r, and %u. KnownHostsCommand additionally accepts the tokens %f, %H, %I, %K and %t. Hostname accepts the tokens %% and %h. LocalCommand accepts all tokens. ProxyCommand and ProxyJump accept the tokens %%, %h, %n, %p, and %r. Note that some of these directives build commands for execution via the shell. Because ssh(1) performs no filtering or escaping of characters that have special meaning in shell commands (e.g. quotes), it is the user's re- sponsibility to ensure that the arguments passed to ssh(1) do not contain such characters and that tokens are appropriately quoted when used. ENVIRONMENT VARIABLES Arguments to some keywords can be expanded at runtime from environment variables on the client by enclosing them in ${}, for example ${HOME}/.ssh would refer to the user's .ssh directory. If a specified environment vari- able does not exist then an error will be returned and the setting for that keyword will be ignored. The keywords CertificateFile, ControlPath, IdentityAgent, IdentityFile, Include, KnownHostsCommand, and UserKnownHostsFile support environment variables. The keywords LocalForward and RemoteForward support environment variables only for Unix domain socket paths. FILES ~/.ssh/config This is the per-user configuration file. The format of this file is described above. This file is used by the SSH client. Because of the potential for abuse, this file must have strict permissions: read/write for the user, and not writable by others. /etc/ssh/ssh_config Systemwide configuration file. This file provides defaults for those values that are not specified in the user's configuration file, and for those users who do not have a configuration file. This file must be world-readable. SEE ALSO ssh(1) AUTHORS OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt and Dug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0. OpenBSD 8.0 September 20, 2026 SSH_CONFIG(5)
NAME | DESCRIPTION | PATTERNS | TOKENS | ENVIRONMENT VARIABLES | FILES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=ssh_config&sektion=5&manpath=OpenBSD+8.0>