FreeBSD Manual Pages
rte_bbdev_op.h(3) DPDK rte_bbdev_op.h(3) NAME rte_bbdev_op.h SYNOPSIS #include <stdint.h> #include <rte_compat.h> #include <rte_common.h> #include <rte_mbuf.h> #include <rte_memory.h> #include <rte_mempool.h> Data Structures struct rte_bbdev_op_data struct rte_bbdev_op_dec_turbo_cb_params struct rte_bbdev_op_dec_ldpc_cb_params struct rte_bbdev_op_dec_turbo_tb_params struct rte_bbdev_op_dec_ldpc_tb_params struct rte_bbdev_op_turbo_dec struct rte_bbdev_op_ldpc_dec struct rte_bbdev_op_enc_turbo_cb_params struct rte_bbdev_op_enc_turbo_tb_params struct rte_bbdev_op_enc_ldpc_cb_params struct rte_bbdev_op_enc_ldpc_tb_params struct rte_bbdev_op_turbo_enc struct rte_bbdev_op_ldpc_enc struct rte_bbdev_op_fft struct rte_bbdev_op_mldts struct rte_bbdev_op_cap_turbo_dec struct rte_bbdev_op_cap_turbo_enc struct rte_bbdev_op_cap_ldpc_dec struct rte_bbdev_op_cap_ldpc_enc struct rte_bbdev_op_cap_fft struct rte_bbdev_op_cap_mld struct rte_bbdev_enc_op struct rte_bbdev_dec_op struct rte_bbdev_fft_op struct rte_bbdev_mldts_op struct rte_bbdev_op_cap Enumerations enum rte_bbdev_op_td_flag_bitmasks { RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE = (1ULL << 0), RTE_BBDEV_TURBO_CRC_TYPE_24B = (1ULL << 1), RTE_BBDEV_TURBO_EQUALIZER = (1ULL << 2), RTE_BBDEV_TURBO_SOFT_OUT_SATURATE = (1ULL << 3), RTE_BBDEV_TURBO_HALF_ITERATION_EVEN = (1ULL << 4), RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH = (1ULL << 5), RTE_BBDEV_TURBO_SOFT_OUTPUT = (1ULL << 6), RTE_BBDEV_TURBO_EARLY_TERMINATION = (1ULL << 7), RTE_BBDEV_TURBO_DEC_INTERRUPTS = (1ULL << 9), RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN = (1ULL << 10), RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN = (1ULL << 11), RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT = (1ULL << 12), RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT = (1ULL << 13), RTE_BBDEV_TURBO_MAP_DEC = (1ULL << 14), RTE_BBDEV_TURBO_DEC_SCATTER_GATHER = (1ULL << 15), RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP = (1ULL << 16), RTE_BBDEV_TURBO_DEC_CRC_24B_DROP = (1ULL << 17) } enum rte_bbdev_op_te_flag_bitmasks { RTE_BBDEV_TURBO_RV_INDEX_BYPASS = (1ULL << 0), RTE_BBDEV_TURBO_RATE_MATCH = (1ULL << 1), RTE_BBDEV_TURBO_CRC_24B_ATTACH = (1ULL << 2), RTE_BBDEV_TURBO_CRC_24A_ATTACH = (1ULL << 3), RTE_BBDEV_TURBO_ENC_INTERRUPTS = (1ULL << 4), RTE_BBDEV_TURBO_ENC_SCATTER_GATHER = (1ULL << 5) } enum rte_bbdev_op_ldpcdec_flag_bitmasks { RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK = (1ULL << 0), RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK = (1ULL << 1), RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP = (1ULL << 2), RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK = (1ULL << 3), RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS = (1ULL << 4), RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE = (1ULL << 5), RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE = (1ULL << 6), RTE_BBDEV_LDPC_DECODE_BYPASS = (1ULL << 7), RTE_BBDEV_LDPC_SOFT_OUT_ENABLE = (1ULL << 8), RTE_BBDEV_LDPC_SOFT_OUT_RM_BYPASS = (1ULL << 9), RTE_BBDEV_LDPC_SOFT_OUT_DEINTERLEAVER_BYPASS = (1ULL << 10), RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE = (1ULL << 11), RTE_BBDEV_LDPC_DEC_INTERRUPTS = (1ULL << 12), RTE_BBDEV_LDPC_DEC_SCATTER_GATHER = (1ULL << 13), RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION = (1ULL << 14), RTE_BBDEV_LDPC_LLR_COMPRESSION = (1ULL << 15), RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE = (1ULL << 16), RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE = (1ULL << 17), RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK = (1ULL << 18), RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS = (1ULL << 19), RTE_BBDEV_LDPC_HARQ_4BIT_COMPRESSION = (1ULL << 20) } enum rte_bbdev_op_ldpcenc_flag_bitmasks { RTE_BBDEV_LDPC_INTERLEAVER_BYPASS = (1ULL << 0), RTE_BBDEV_LDPC_RATE_MATCH = (1ULL << 1), RTE_BBDEV_LDPC_CRC_24A_ATTACH = (1ULL << 2), RTE_BBDEV_LDPC_CRC_24B_ATTACH = (1ULL << 3), RTE_BBDEV_LDPC_CRC_16_ATTACH = (1ULL << 4), RTE_BBDEV_LDPC_ENC_INTERRUPTS = (1ULL << 5), RTE_BBDEV_LDPC_ENC_SCATTER_GATHER = (1ULL << 6), RTE_BBDEV_LDPC_ENC_CONCATENATION = (1ULL << 7) } enum rte_bbdev_op_fft_flag_bitmasks { RTE_BBDEV_FFT_WINDOWING = (1ULL << 0), RTE_BBDEV_FFT_CS_ADJUSTMENT = (1ULL << 1), RTE_BBDEV_FFT_DFT_BYPASS = (1ULL << 2), RTE_BBDEV_FFT_IDFT_BYPASS = (1ULL << 3), RTE_BBDEV_FFT_WINDOWING_BYPASS = (1ULL << 4), RTE_BBDEV_FFT_POWER_MEAS = (1ULL << 5), RTE_BBDEV_FFT_FP16_INPUT = (1ULL << 6), RTE_BBDEV_FFT_FP16_OUTPUT = (1ULL << 7), RTE_BBDEV_FFT_TIMING_OFFSET_PER_CS = (1ULL << 8), RTE_BBDEV_FFT_TIMING_ERROR = (1ULL << 9), RTE_BBDEV_FFT_DEWINDOWING = (1ULL << 10), RTE_BBDEV_FFT_FREQ_RESAMPLING = (1ULL << 11) } enum rte_bbdev_op_mldts_flag_bitmasks { RTE_BBDEV_MLDTS_REP = (1ULL << 0) } enum rte_bbdev_op_cb_mode { RTE_BBDEV_TRANSPORT_BLOCK = 0, RTE_BBDEV_CODE_BLOCK = 1 } enum rte_bbdev_op_type { RTE_BBDEV_OP_NONE, RTE_BBDEV_OP_TURBO_DEC, RTE_BBDEV_OP_TURBO_ENC, RTE_BBDEV_OP_LDPC_DEC, RTE_BBDEV_OP_LDPC_ENC, RTE_BBDEV_OP_FFT, RTE_BBDEV_OP_MLDTS } enum Functions const char * rte_bbdev_op_type_str (enum rte_bbdev_op_type op_type) struct rte_mempool * rte_bbdev_op_pool_create (const char *name, enum rte_bbdev_op_type type, unsigned int num_elements, unsigned int cache_size, int socket_id) static int rte_bbdev_enc_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_enc_op **ops, unsigned int num_ops) static int rte_bbdev_dec_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_dec_op **ops, unsigned int num_ops) static int rte_bbdev_fft_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_fft_op **ops, unsigned int num_ops) static int rte_bbdev_mldts_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_mldts_op **ops, uint16_t num_ops) static void rte_bbdev_dec_op_free_bulk (struct rte_bbdev_dec_op **ops, unsigned int num_ops) static void rte_bbdev_enc_op_free_bulk (struct rte_bbdev_enc_op **ops, unsigned int num_ops) static void rte_bbdev_fft_op_free_bulk (struct rte_bbdev_fft_op **ops, unsigned int num_ops) static void rte_bbdev_mldts_op_free_bulk (struct rte_bbdev_mldts_op **ops, unsigned int num_ops) Detailed Description Defines wireless base band layer 1 operations and capabilities Definition in file rte_bbdev_op.h. Enumeration Type Documentation enum rte_bbdev_op_td_flag_bitmasks Flags for turbo decoder operation and capability structure Enumerator RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE If sub block de-interleaving is to be performed. RTE_BBDEV_TURBO_CRC_TYPE_24B To use CRC Type 24B (otherwise use CRC Type 24A). RTE_BBDEV_TURBO_EQUALIZER If turbo equalization is to be performed. RTE_BBDEV_TURBO_SOFT_OUT_SATURATE If set, saturate soft output to +/-127 RTE_BBDEV_TURBO_HALF_ITERATION_EVEN Set to 1 to start iteration from even, else odd; one iteration = max_iteration + 0.5 RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH If 0, TD stops after CRC matches; else if 1, runs to end of next odd iteration after CRC matches RTE_BBDEV_TURBO_SOFT_OUTPUT Set if soft output is required to be output RTE_BBDEV_TURBO_EARLY_TERMINATION Set to enable early termination mode RTE_BBDEV_TURBO_DEC_INTERRUPTS Set if a device supports decoder dequeue interrupts RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN Set if positive LLR encoded input is supported. Positive LLR value represents the level of confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN when used to formalize the input data format. RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN Set if negative LLR encoded input is supported. Negative LLR value represents the level of confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN when used to formalize the input data format. RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT Set if positive LLR soft output is supported. Positive LLR value represents the level of confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT when used to formalize the input data format. RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT Set if negative LLR soft output is supported. Negative LLR value represents the level of confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT when used to formalize the input data format. RTE_BBDEV_TURBO_MAP_DEC Set if driver supports flexible parallel MAP engine decoding. If not supported, num_maps (number of MAP engines) argument is unusable. RTE_BBDEV_TURBO_DEC_SCATTER_GATHER Set if a device supports scatter-gather functionality RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP Set to keep CRC24B bits appended while decoding. Only usable when decoding Transport Block mode. RTE_BBDEV_TURBO_DEC_CRC_24B_DROP Set to drop CRC24B bits not to be appended while decoding. Definition at line 67 of file rte_bbdev_op.h. enum rte_bbdev_op_te_flag_bitmasks Flags for turbo encoder operation and capability structure Enumerator RTE_BBDEV_TURBO_RV_INDEX_BYPASS Ignore rv_index and set K0 = 0 RTE_BBDEV_TURBO_RATE_MATCH If rate matching is to be performed RTE_BBDEV_TURBO_CRC_24B_ATTACH This bit must be set to enable CRC-24B generation RTE_BBDEV_TURBO_CRC_24A_ATTACH This bit must be set to enable CRC-24A generation RTE_BBDEV_TURBO_ENC_INTERRUPTS Set if a device supports encoder dequeue interrupts RTE_BBDEV_TURBO_ENC_SCATTER_GATHER Set if a device supports scatter-gather functionality Definition at line 137 of file rte_bbdev_op.h. enum rte_bbdev_op_ldpcdec_flag_bitmasks Flags for LDPC decoder operation and capability structure Enumerator RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK Set for transport block CRC-24A checking RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK Set for code block CRC-24B checking RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP Set to drop the last CRC bits decoding output RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK Set for transport block CRC-16 checking RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS Set for bit-level de-interleaver bypass on Rx stream. RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE Set for HARQ combined input stream enable. RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE Set for HARQ combined output stream enable. RTE_BBDEV_LDPC_DECODE_BYPASS Set for LDPC decoder bypass. RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE must be set. RTE_BBDEV_LDPC_SOFT_OUT_ENABLE Set for soft-output stream enable RTE_BBDEV_LDPC_SOFT_OUT_RM_BYPASS Set for Rate-Matching bypass on soft-out stream. RTE_BBDEV_LDPC_SOFT_OUT_DEINTERLEAVER_BYPASS Set for bit-level de-interleaver bypass on soft-output stream. RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE Set for iteration stopping on successful decode condition i.e. a successful syndrome check. RTE_BBDEV_LDPC_DEC_INTERRUPTS Set if a device supports decoder dequeue interrupts. RTE_BBDEV_LDPC_DEC_SCATTER_GATHER Set if a device supports scatter-gather functionality. RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION Set if a device supports input/output HARQ compression. RTE_BBDEV_LDPC_LLR_COMPRESSION Set if a device supports input LLR compression. RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE Set if a device supports HARQ input from device's internal memory. RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE Set if a device supports HARQ output to device's internal memory. RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK Set if a device supports loop-back access to HARQ internal memory. Intended for troubleshooting. RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS Set if a device includes LLR filler bits in the circular buffer for HARQ memory. If not set, it is assumed the filler bits are not in HARQ memory and handled directly by the LDPC decoder. RTE_BBDEV_LDPC_HARQ_4BIT_COMPRESSION Set if a device supports input/output HARQ 4bits compression. Definition at line 153 of file rte_bbdev_op.h. enum rte_bbdev_op_ldpcenc_flag_bitmasks Flags for LDPC encoder operation and capability structure Enumerator RTE_BBDEV_LDPC_INTERLEAVER_BYPASS Set for bit-level interleaver bypass on output stream. RTE_BBDEV_LDPC_RATE_MATCH If rate matching is to be performed RTE_BBDEV_LDPC_CRC_24A_ATTACH Set for transport block CRC-24A attach RTE_BBDEV_LDPC_CRC_24B_ATTACH Set for code block CRC-24B attach RTE_BBDEV_LDPC_CRC_16_ATTACH Set for code block CRC-16 attach RTE_BBDEV_LDPC_ENC_INTERRUPTS Set if a device supports encoder dequeue interrupts. RTE_BBDEV_LDPC_ENC_SCATTER_GATHER Set if a device supports scatter-gather functionality. RTE_BBDEV_LDPC_ENC_CONCATENATION Set if a device supports concatenation of non byte aligned output Definition at line 212 of file rte_bbdev_op.h. enum rte_bbdev_op_fft_flag_bitmasks Flags for FFT operation and capability structure. Enumerator RTE_BBDEV_FFT_WINDOWING Flexible windowing capability. RTE_BBDEV_FFT_CS_ADJUSTMENT Flexible adjustment of Cyclic Shift time offset. RTE_BBDEV_FFT_DFT_BYPASS Set for bypass the DFT and get directly into iDFT input. RTE_BBDEV_FFT_IDFT_BYPASS Set for bypass the IDFT and get directly the DFT output. RTE_BBDEV_FFT_WINDOWING_BYPASS Set for bypass time domain windowing. RTE_BBDEV_FFT_POWER_MEAS Set for optional power measurement on DFT output. RTE_BBDEV_FFT_FP16_INPUT Set if the input data used FP16 format. RTE_BBDEV_FFT_FP16_OUTPUT Set if the output data uses FP16 format. RTE_BBDEV_FFT_TIMING_OFFSET_PER_CS Flexible adjustment of Timing offset adjustment per CS. RTE_BBDEV_FFT_TIMING_ERROR Flexible adjustment of Timing error correction per CS. RTE_BBDEV_FFT_DEWINDOWING Set for optional frequency domain dewindowing. RTE_BBDEV_FFT_FREQ_RESAMPLING Flexible adjustment of frequency resampling mode. Definition at line 232 of file rte_bbdev_op.h. enum rte_bbdev_op_mldts_flag_bitmasks Flags for MLDTS operation and capability structure Enumerator RTE_BBDEV_MLDTS_REP Set if the device supports C/R repetition options. Definition at line 260 of file rte_bbdev_op.h. enum rte_bbdev_op_cb_mode Flags for the Code Block/Transport block mode Enumerator RTE_BBDEV_TRANSPORT_BLOCK One operation is one or fraction of one transport block RTE_BBDEV_CODE_BLOCK One operation is one code block mode Definition at line 266 of file rte_bbdev_op.h. enum rte_bbdev_op_type Different operation types supported by the device. The related macro RTE_BBDEV_OP_TYPE_SIZE_MAX can be used as an absolute maximum for notably sizing array while allowing for future enumeration insertion. Enumerator RTE_BBDEV_OP_NONE Dummy operation that does nothing RTE_BBDEV_OP_TURBO_DEC Turbo decode RTE_BBDEV_OP_TURBO_ENC Turbo encode RTE_BBDEV_OP_LDPC_DEC LDPC decode RTE_BBDEV_OP_LDPC_ENC LDPC encode RTE_BBDEV_OP_FFT FFT RTE_BBDEV_OP_MLDTS MLD-TS Definition at line 930 of file rte_bbdev_op.h. anonymous enum Bit indexes of possible errors reported through status field Definition at line 942 of file rte_bbdev_op.h. Function Documentation const char * rte_bbdev_op_type_str (enum rte_bbdev_op_type op_type) Converts queue operation type from enum to string Parameters op_type Operation type as enum Returns Operation type as string or NULL if op_type is invalid struct rte_mempool * rte_bbdev_op_pool_create (const char * name, enum rte_bbdev_op_type type, unsigned int num_elements, unsigned int cache_size, int socket_id) Creates a bbdev operation mempool Parameters name Pool name. type Operation type, use RTE_BBDEV_OP_NONE for a pool which supports all operation types. num_elements Number of elements in the pool. cache_size Number of elements to cache on an lcore, see rte_mempool_create() for further details about cache size. socket_id Socket to allocate memory on. Returns • Pointer to a mempool on success, • NULL pointer on failure. static int rte_bbdev_enc_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_enc_op ** ops, unsigned int num_ops) [inline], [static] Bulk allocate encode operations from a mempool with parameter defaults reset. Parameters mempool Operation mempool, created by rte_bbdev_op_pool_create(). ops Output array to place allocated operations num_ops Number of operations to allocate Returns • 0 on success • EINVAL if invalid mempool is provided Definition at line 1076 of file rte_bbdev_op.h. static int rte_bbdev_dec_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_dec_op ** ops, unsigned int num_ops) [inline], [static] Bulk allocate decode operations from a mempool with parameter defaults reset. Parameters mempool Operation mempool, created by rte_bbdev_op_pool_create(). ops Output array to place allocated operations num_ops Number of operations to allocate Returns • 0 on success • EINVAL if invalid mempool is provided Definition at line 1107 of file rte_bbdev_op.h. static int rte_bbdev_fft_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_fft_op ** ops, unsigned int num_ops) [inline], [static] Bulk allocate FFT operations from a mempool with default parameters. Parameters mempool Operation mempool, created by rte_bbdev_op_pool_create. ops Output array to place allocated operations. num_ops Number of operations to allocate. Returns • 0 on success. • EINVAL if invalid mempool is provided. Definition at line 1138 of file rte_bbdev_op.h. static int rte_bbdev_mldts_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_mldts_op ** ops, uint16_t num_ops) [inline], [static] Bulk allocate MLD operations from a mempool with parameter defaults reset. Parameters mempool Operation mempool, created by rte_bbdev_op_pool_create. ops Output array to place allocated operations. num_ops Number of operations to allocate. Returns • 0 on success. • EINVAL if invalid mempool is provided. Definition at line 1167 of file rte_bbdev_op.h. static void rte_bbdev_dec_op_free_bulk (struct rte_bbdev_dec_op ** ops, unsigned int num_ops) [inline], [static] Free decode operation structures that were allocated by rte_bbdev_dec_op_alloc_bulk(). All structures must belong to the same mempool. Parameters ops Operation structures num_ops Number of structures Definition at line 1192 of file rte_bbdev_op.h. static void rte_bbdev_enc_op_free_bulk (struct rte_bbdev_enc_op ** ops, unsigned int num_ops) [inline], [static] Free encode operation structures that were allocated by rte_bbdev_enc_op_alloc_bulk(). All structures must belong to the same mempool. Parameters ops Operation structures num_ops Number of structures Definition at line 1209 of file rte_bbdev_op.h. static void rte_bbdev_fft_op_free_bulk (struct rte_bbdev_fft_op ** ops, unsigned int num_ops) [inline], [static] Free encode operation structures that were allocated by rte_bbdev_fft_op_alloc_bulk. All structures must belong to the same mempool. Parameters ops Operation structures. num_ops Number of structures. Definition at line 1226 of file rte_bbdev_op.h. static void rte_bbdev_mldts_op_free_bulk (struct rte_bbdev_mldts_op ** ops, unsigned int num_ops) [inline], [static] Free encode operation structures that were allocated by rte_bbdev_mldts_op_alloc_bulk(). All structures must belong to the same mempool. Parameters ops Operation structures num_ops Number of structures Definition at line 1243 of file rte_bbdev_op.h. Author Generated automatically by Doxygen for DPDK from the source code. Version 25.11.0 Thu Jun 11 2026 rte_bbdev_op.h(3)
NAME | SYNOPSIS | Detailed Description | Enumeration Type Documentation | Function Documentation | Author
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=RTE_BBDEV_MLDTS_REP&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>