Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
ADELSYSTEM_CBI(8)		   NUT Manual		       ADELSYSTEM_CBI(8)

NAME
     adelsystem_cbi - Driver for the ADELSYSTEM CB/CBI DC-UPS

SYNOPSIS
     adelsystem_cbi -h

     adelsystem_cbi -a DEVICE_NAME [OPTIONS]

	 Note

	 This  man  page  only	documents  the specific features of the adelsys-
	 tem_cbi driver. For information about	the  core  driver,  see  nutups-
	 drv(8).

SUPPORTED HARDWARE
     This is the driver for the adelsystem cb/cbi dc-ups devices.

     The driver has been tested against CBI2801224A, all in one 12/24Vdc DC-UPS.

     More information about this UPS can be found here:
	 https://www.adelsystem.com/en/products/dc-ups-/

EXTRA ARGUMENTS
     This  driver  supports  the  following optional settings in the ups.conf(5)
     file:

   Serial:
     ser_baud_rate=value
	 A integer specifying the serial port baud rate (default 9600).

     ser_data_bit=value
	 A integer specifying the serial port data bit (default 8).

     ser_parity=value
	 A character specifying the serial port parity (default N).

     ser_stop_bit=value
	 An integer specifying the serial port stop bit (default 1).

   Modbus:
     dev_slave_id=value
	 An integer specifying the device modbus slave ID (default 1).

CONFIGURATION
     Here is an example of adelsystem_cbi driver configuration in ups.conf file:

	 [adelsystem_cbi]
	   driver = adelsystem_cbi
	   port = /dev/ttyUSB0
	   desc = "adelsystem cb/cbi ups driver"
	   # serial settings
	   ser_baud_rate = 9600
	   ser_parity = N
	   ser_data_bit = 8
	   ser_stop_bit = 1
	   # modbus slave id
	   dev_slave_id = 5

INSTANT COMMANDS
     This driver support the following instant commands:

     load.off
	 executes "instant poweroff"

INSTALLATION
     This driver may be not built by default. You can  build  it  by  installing
     libmodbus and running configure --with-modbus=yes.

     You  also	need  to give proper permissions on the local serial device file
     (/dev/ttyUSB0 for example) to allow the run-time NUT driver user account to
     access it.

AUTHOR
     Dimitris Economou <dimitris.s.economou@gmail.com>

SEE ALSO
   The core driver:
     nutupsdrv(8), ups.conf(5)

   Internet resources:
     *	 The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

     *	 libmodbus home page: http://libmodbus.org

Network UPS Tools 2.8.5.	   08/04/2026		       ADELSYSTEM_CBI(8)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=adelsystem_cbi&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>

home | help