FreeBSD Manual Pages
ALSAMIXER(1) General Commands Manual ALSAMIXER(1) NAME alsamixer - soundcard mixer for ALSA soundcard driver, with ncurses inter- face SYNOPSIS alsamixer [options] DESCRIPTION alsamixer is an ncurses mixer program for use with the ALSA soundcard dri- vers. It supports multiple soundcards with multiple devices. OPTIONS -h, --help Help: show available flags. -c, --card <card number or identification> Select the soundcard to use, if you have more than one. Cards are numbered from 0 (the default). -D, --device <device identification> Select the mixer device to control. -V, --view <mode> Select the starting view mode, either playback, capture or all. -B, --black-background Use the black background color. -g, --no-color Toggle the using of colors. MIXER VIEWS The top-left corner of alsamixer shows some basic information: the card name, the mixer chip name, the current view mode and the currently selected mixer item. When the mixer item is switched off, [Off] is displayed in its name. Volume bars are located below the basic information area. You can scroll left/right when all controls can't be put in a single screen. The name of each control is shown in the bottom below the volume bars. The currently selected item is drawn in red and/or emphasized. Each mixer control with volume capability shows a box and the current vol- ume filled in that box. The volume percentages are displayed below the volume bar for left and right channels. For a mono control, only one value is shown there. When a mixer control is turned off, M (mute) appears below the volume bar. When it's turned on, O in green appears instead. You can toggle the switch via m key. When a mixer control has capture capability, the capture flag appears below the volume bar, too. When the capture is turned off, ------- is shown. CAPTURE in red appears when the capture switch is turned on. In addition, L and R letters appear in left and right side to indicate that left and the right channels are turned on. Some controls have the enumeration list, and don't show boxes but only texts which indicate the currently active item. You can change the item via up/down keys. VIEW MODES alsamixer has three view modes: playback, capture and all. In the playback view, only the controls related with playback are shown. Similarly, only the controls for capture (recording) are shown in the capture view. The all view mode shows all controls. The current view mode is displayed in the top-left position together with the mixer name, etc. The default view mode is the playback view. You can change it via -V op- tion. Each view mode can be switched via keyboard commands, too. See the next section. KEYBOARD COMMANDS alsamixer recognizes the following keyboard commands to control the sound- card. Commands shown here in upper case can also be given in lower case. To be reminded of these keystrokes, hit the h key. General Controls The Left and right arrow keys are used to select the channel (or device, depending on your preferred terminology). You can also use n ("next") and p ("previous"). The Up and Down Arrows control the volume for the currently selected de- vice. You can also use + or - for the same purpose. Both the left and right signals are affected. For independent left and right control, see below. The B or = key adjusts the balance of volumes on left and right channels. M toggles muting for the current channel (both left and right). If the hardware supports it, you can mute left and right independently by using , (or <) and . (or >) respectively. SPACE enables recording for the current channel. If any other channels have recording enabled, they will have their recording function disabled first. This only works for valid input channels, of course. L re-draws the screen. View Mode Controls Function keys are used to change view modes. You can switch to the help mode and the proc info mode via F1 and F2 keys, respectively. On terminals that can't use function keys like gnome-terminal, ? and / keys can be used alternatively for help and proc modes. F3, F4 and F5 keys are used to switch to playback, capture and all view mode, respectively. TAB key toggles the current view mode circularly. Quick Volume Changes PageUp increases volume by 5. PageDown decreases volume by 5. End sets volume to 0. You can also control left & right levels for the current channel indepen- dently, as follows: [Q | W | E ] -- turn UP [ left | both | right ] [Z | X | C ] -- turn DOWN [ left | both | right ] If the currently selected mixer channel is not a stereo channel, then all UP keys will work like W, and all DOWN keys will work like X. The number keys from 0 to 9 are to change the absolute volume quickly. They correspond to 0 to 90% volume. Selecting the Sound Card You can select another sound card by pressing the F6 or S keys. This will show a list of available sound cards to choose from, and an entry to enter the mixer device name by hand. Exiting Quit the program with ALT Q, or by hitting ESC. Please note that you might need to hit ESC twice on some terminals since it's regarded as a prefix key. VOLUME MAPPING In alsamixer, the volume is mapped to a value that is more natural for a human ear. The mapping is designed so that the position in the interval is proportional to the volume as a human ear would perceive it, i.e. the posi- tion is the cubic root of the linear sample multiplication factor. For controls with a small range (24 dB or less), the mapping is linear in the dB values so that each step has the same size visually. Only for controls without dB information, a linear mapping of the hardware volume register values is used (this is the same algorithm as used in the old alsamixer). FILES Configuration is read from the following files: $XDG_CONFIG_HOME/alsamixer.rc $HOME/.config/alsamixer.rc CONFIGURATION Comments start with '#'. color element foreground background [attribute...] Valid values for foreground and background are: red, green, yellow, blue, magenta, cyan, white, black, none / default. Valid values for attribute are: bold, normal, reverse, underline, dim, italic, blink. See section THEME ELEMENTS for a list of elements. set option value mouse_wheel_step <N> Set the mouse wheel step to <N> mouse_wheel_focuses_control 0|1 If enabled (1), mixer controls can be changed by hovering over them and scrolling the mouse wheel. background color Set the default background color bind key_definition command A key_definition may be: - a single character - a combination with control: C-a - a combination with alt: M-a - a special keyname: Enter, Escape, PageUp, PageDown, Left, Down, Right, Up, Home, End, Backspace, F1 .. F12 See section COMMANDS for a list of commands. COMMANDS textbox_close Close textbox textbox_up / textbox_down Scroll text up/down by one line textbox_left / textbox_right Scroll text left/right by one column textbox_page_up / textbox_page_down Scroll text up/down one page textbox_page_left / textbox_page_right Scroll text left/right one page textbox_top / textbox_bottom Go to top/bottom position of text mixer_balance_volumes Balance both channels mixer_close Close alsamixer application mixer_help Show help mixer_mode_playback Show playback controls mixer_mode_capture Show capture controls mixer_mode_all Show playback and capture controls mixer_mode_toggle Toggle between playback/capture/all controls mixer_refresh Refresh screen mixer_previous / mixer_next Select previous/next mixer control mixer_control_focus_<N> Focus control number <N>. mixer_control_set_<N>[_left|_right] Change volume of current control to <N> percent. mixer_control_up_<N>[_left|_right] Increase volume of current control by <N> percent. mixer_control_down_<N>[_left|_right] Decrease volume of current control by <N> percent. mixer_toggle_mute[_left|_right] Toggle mute state of both/left/right channels mixer_toggle_capture[_left|_right] Toggle capture state of both/left/right channels mixer_select_card Show window for selecting sound card mixer_system_information Show system information THEME ELEMENTS mixer_frame Color of the box around the mixer mixer_text Color of text at the top of the mixer mixer_active Color of AlsaMixer heading ctl_frame Color of the frame around the mixer controls ctl_mute Color indicating the mute state (MM) ctl_nomute Color indicating the unmute state (00) ctl_capture Color of CAPTURE text ctl_nocapture Colof of disabled capture label ctl_label Color of label underneath mixer controls ctl_label_focus Color of label underneath focused mixer control ctl_mark_focus Color of <> marks beside focused mixer label ctl_bar_lo Color of lower volume bar ctl_bar_mi Color of middle volume bar ctl_bar_hi Color of top volume bar ctl_inactive Color for inactive control ctl_label_inactive Color for inactive label errormsg Color used for error message infomsg Color used for information message textbox Color used for textbox (user input) textfield Color used for textbox menu Color used for menu menu_selected Color used for selected entry in menu SEE ALSO amixer(1), aplay(1), arecord(1) AUTHOR alsamixer has been written by Tim Janik and been further improved by Jaroslav Kysela <perex@perex.cz> and Clemens Ladisch <clemens@ladisch.de>. This manual page was provided by Paul Winkler <zarmzarm@erols.com>. 22 May 2009 ALSAMIXER(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | MIXER VIEWS | VIEW MODES | KEYBOARD COMMANDS | VOLUME MAPPING | FILES | CONFIGURATION | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=alsamixer&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>