FreeBSD Manual Pages

home | help

CMAKE-VARIABLES(7) CMake CMAKE-VARIABLES(7)

NAME
cmake-variables - CMake Variables Reference

This page documents variables that are provided by CMake or have meaning to
CMake when set by project code.

For general information on variables, see the Variables section in the
cmake-language manual.

NOTE:
CMake reserves identifiers that:

* begin with CMAKE_ (upper-, lower-, or mixed-case), or

* begin with _CMAKE_ (upper-, lower-, or mixed-case), or

* begin with _ followed by the name of any CMake Command.

VARIABLES THAT PROVIDE INFORMATION
CMAKE_AR
Name of archiving tool for static libraries.

This specifies the name of the program that creates archive or static li-
braries.

CMAKE_ARGC
Number of command line arguments passed to CMake in script mode.

When run in -P script mode, CMake sets this variable to the number of com-
mand line arguments. See also CMAKE_ARGV0, 1, 2 ...

CMAKE_ARGV0
Command line argument passed to CMake in script mode.

When run in -P script mode, CMake sets this variable to the first command
line argument. It then also sets CMAKE_ARGV1, CMAKE_ARGV2, ... and so on,
up to the number of command line arguments given. See also CMAKE_ARGC.

CMAKE_BINARY_DIR
The path to the top level of the build tree.

This is the full path to the top level of the current CMake build tree.
For an in-source build, this would be the same as CMAKE_SOURCE_DIR.

When run in cmake -P script mode, CMake sets the variables CMAKE_BI-
NARY_DIR, CMAKE_SOURCE_DIR, CMAKE_CURRENT_BINARY_DIR and
CMAKE_CURRENT_SOURCE_DIR to the current working directory.

CMAKE_BUILD_TOOL
This variable exists only for backwards compatibility. It contains the
same value as CMAKE_MAKE_PROGRAM. Use that variable instead.

CMAKE_CACHE_MAJOR_VERSION
Major version of CMake used to create the CMakeCache.txt file

This stores the major version of CMake used to write a CMake cache file.
It is only different when a different version of CMake is run on a previ-
ously created cache file.

CMAKE_CACHE_MINOR_VERSION
Minor version of CMake used to create the CMakeCache.txt file

This stores the minor version of CMake used to write a CMake cache file.
It is only different when a different version of CMake is run on a previ-
ously created cache file.

CMAKE_CACHE_PATCH_VERSION
Patch version of CMake used to create the CMakeCache.txt file

This stores the patch version of CMake used to write a CMake cache file.
It is only different when a different version of CMake is run on a previ-
ously created cache file.

CMAKE_CACHEFILE_DIR
This variable is used internally by CMake, and may not be set during the
first configuration of a build tree. When it is set, it has the same value
as CMAKE_BINARY_DIR. Use that variable instead.

CMAKE_CFG_INTDIR
Deprecated since version 3.21: This variable has poor support on Ninja
Multi-Config, and predates the existence of the $<CONFIG> generator expres-
sion. Use $<CONFIG> instead.

Build-time reference to per-configuration output subdirectory.

For native build systems supporting multiple configurations in the build
tree (such as Visual Studio Generators and Xcode), the value is a reference
to a build-time variable specifying the name of the per-configuration out-
put subdirectory. On Makefile Generators this evaluates to . because there
is only one configuration in a build tree. Example values:

$(Configuration) = Visual Studio
$(CONFIGURATION) = Xcode
. = Make-based tools
. = Ninja
${CONFIGURATION} = Ninja Multi-Config

Since these values are evaluated by the native build system, this variable
is suitable only for use in command lines that will be evaluated at build
time. Example of intended usage:

add_executable(mytool mytool.c)
add_custom_command(
OUTPUT out.txt
COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool
${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt
DEPENDS mytool in.txt
)
add_custom_target(drive ALL DEPENDS out.txt)

Note that CMAKE_CFG_INTDIR is no longer necessary for this purpose but has
been left for compatibility with existing projects. Instead
add_custom_command() recognizes executable target names in its COMMAND op-
tion, so ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool can be re-
placed by just mytool.

This variable is read-only. Setting it is undefined behavior. In
multi-configuration build systems the value of this variable is passed as
the value of preprocessor symbol CMAKE_INTDIR to the compilation of all
source files.

CMAKE_COMMAND
The full path to the cmake(1) executable.

This is the full path to the CMake executable cmake(1) which is useful from
custom commands that want to use the cmake -E option for portable system
commands. (e.g. /usr/local/bin/cmake)

CMAKE_CPACK_COMMAND
Added in version 3.13.

Full path to cpack(1) command installed with CMake.

This is the full path to the CPack executable cpack(1) that can be used for
custom commands or tests to invoke CPack commands.

CMAKE_CROSSCOMPILING
This variable is set by CMake to indicate whether it is cross compiling,
but note limitations discussed below.

This variable will be set to true by CMake if the CMAKE_SYSTEM_NAME vari-
able has been set manually (i.e. in a toolchain file or as a cache entry
from the cmake command line). In most cases, manually setting
CMAKE_SYSTEM_NAME will only be done when cross compiling since, if not man-
ually set, it will be given the same value as CMAKE_HOST_SYSTEM_NAME, which
is correct for the non-cross-compiling case. In the event that
CMAKE_SYSTEM_NAME is manually set to the same value as
CMAKE_HOST_SYSTEM_NAME, then CMAKE_CROSSCOMPILING will still be set to
true.

Another case to be aware of is that builds targeting Apple platforms other
than macOS are handled differently to other cross compiling scenarios.
Rather than relying on CMAKE_SYSTEM_NAME to select the target platform, Ap-
ple device builds use CMAKE_OSX_SYSROOT to select the appropriate SDK,
which indirectly determines the target platform. Furthermore, when using
the Xcode generator, developers can switch between device and simulator
builds at build time rather than having a single choice at configure time,
so the concept of whether the build is cross compiling or not is more com-
plex. Therefore, the use of CMAKE_CROSSCOMPILING is not recommended for
projects targeting Apple devices.

CMAKE_CROSSCOMPILING_EMULATOR
Added in version 3.3.

This variable is only used when CMAKE_CROSSCOMPILING is on. It should point
to a command on the host system that can run executable built for the tar-
get system.

Added in version 3.15: If this variable contains a semicolon-separated
list, then the first value is the command and remaining values are its ar-
guments.

Added in version 3.28: This variable can be initialized via an
CMAKE_CROSSCOMPILING_EMULATOR environment variable.

The command will be used to run try_run() generated executables, which
avoids manual population of the TryRunResults.cmake file.

This variable is also used as the default value for the
CROSSCOMPILING_EMULATOR target property of executables. However, while
generator expressions are supported by the target property (since CMake
3.29), they are not supported by this variable's try_run() functionality.

CMAKE_CTEST_COMMAND
Full path to ctest(1) command installed with CMake.

This is the full path to the CTest executable ctest(1) that can be used for
custom commands or tests to invoke CTest commands.

CMAKE_CURRENT_BINARY_DIR
The path to the binary directory currently being processed.

This is the full path to the build directory that is currently being
processed by cmake. Each directory added by add_subdirectory() will create
a binary directory in the build tree, and as it is being processed this
variable will be set. For in-source builds this is the current source di-
rectory being processed.

When run in cmake -P script mode, CMake sets the variables
CMAKE_BINARY_DIR, CMAKE_SOURCE_DIR, CMAKE_CURRENT_BINARY_DIR and
CMAKE_CURRENT_SOURCE_DIR to the current working directory.

CMAKE_CURRENT_FUNCTION
Added in version 3.17.

When executing code inside a function(), this variable contains the name of
the current function. It can be useful for diagnostic or debug messages.

See also CMAKE_CURRENT_FUNCTION_LIST_DIR, CMAKE_CURRENT_FUNCTION_LIST_FILE
and CMAKE_CURRENT_FUNCTION_LIST_LINE.

CMAKE_CURRENT_FUNCTION_LIST_DIR
Added in version 3.17.

When executing code inside a function(), this variable contains the full
directory of the listfile that defined the current function.

It is quite common practice in CMake for modules to use some additional
files, such as templates to be copied in after substituting CMake vari-
ables. In such cases, a function needs to know where to locate those files
in a way that doesn't depend on where the function is called. Without
CMAKE_CURRENT_FUNCTION_LIST_DIR, the code to do that would typically use
the following pattern:

set(_THIS_MODULE_BASE_DIR "${CMAKE_CURRENT_LIST_DIR}")

function(foo)
configure_file(
"${_THIS_MODULE_BASE_DIR}/some.template.in"
some.output
)
endfunction()

Using CMAKE_CURRENT_FUNCTION_LIST_DIR inside the function instead elimi-
nates the need for the extra variable which would otherwise be visible out-
side the function's scope. The above example can be written in the more
concise and more robust form:

function(foo)
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/some.template.in"
some.output
)
endfunction()

See also CMAKE_CURRENT_FUNCTION, CMAKE_CURRENT_FUNCTION_LIST_FILE and
CMAKE_CURRENT_FUNCTION_LIST_LINE.

CMAKE_CURRENT_FUNCTION_LIST_FILE
Added in version 3.17.

When executing code inside a function(), this variable contains the full
path to the listfile that defined the current function.

See also CMAKE_CURRENT_FUNCTION, CMAKE_CURRENT_FUNCTION_LIST_DIR and
CMAKE_CURRENT_FUNCTION_LIST_LINE.

CMAKE_CURRENT_FUNCTION_LIST_LINE
Added in version 3.17.

When executing code inside a function(), this variable contains the line
number in the listfile where the current function was defined.

See also CMAKE_CURRENT_FUNCTION, CMAKE_CURRENT_FUNCTION_LIST_DIR and
CMAKE_CURRENT_FUNCTION_LIST_FILE.

CMAKE_CURRENT_LIST_DIR
Full directory of the listfile currently being processed.

As CMake processes the listfiles in your project this variable will always
be set to the directory where the listfile which is currently being
processed (CMAKE_CURRENT_LIST_FILE) is located. The value has dynamic
scope. When CMake starts processing commands in a source file it sets this
variable to the directory where this file is located. When CMake finishes
processing commands from the file it restores the previous value. There-
fore the value of the variable inside a macro or function is the directory
of the file invoking the bottom-most entry on the call stack, not the di-
rectory of the file containing the macro or function definition.

See also the following variables:

* CMAKE_IGNORE_PREFIX_PATH

* CMAKE_SYSTEM_IGNORE_PATH

* CMAKE_PREFIX_PATH

* CMAKE_LIBRARY_PATH

* CMAKE_INCLUDE_PATH

* CMAKE_PROGRAM_PATH

CMAKE_IGNORE_PREFIX_PATH
Added in version 3.23.

Semicolon-separated list of search prefixes to be ignored by the
find_program(), find_library(), find_file(), and find_path() commands. The
prefixes are also ignored by the Config mode of the find_package() command
(Module mode is unaffected). To ignore specific directories instead, see
CMAKE_IGNORE_PATH.

By default, CMAKE_IGNORE_PREFIX_PATH is empty. It is intended to be set by
the project or the end user.

See also the following variables:

* CMAKE_IGNORE_PATH

* CMAKE_SYSTEM_IGNORE_PREFIX_PATH

* CMAKE_PREFIX_PATH

* CMAKE_LIBRARY_PATH

* CMAKE_INCLUDE_PATH

* CMAKE_PROGRAM_PATH

CMAKE_INCLUDE_DIRECTORIES_BEFORE
Whether to append or prepend directories by default in
include_directories().

This variable affects the default behavior of the include_directories()
command. Setting this variable to ON is equivalent to using the BEFORE op-
tion in all uses of that command.

CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE
Whether to force prepending of project include directories.

This variable affects the order of include directories generated in com-
piler command lines. If set to ON, it causes the CMAKE_SOURCE_DIR and the
CMAKE_BINARY_DIR to appear first.

CMAKE_INCLUDE_PATH
Semicolon-separated list of directories specifying a search path for the
find_file() and find_path() commands. By default it is empty, it is in-
tended to be set by the project.

There is also an environment variable CMAKE_INCLUDE_PATH, which is used as
an additional list of search directories.

See also CMAKE_SYSTEM_INCLUDE_PATH and CMAKE_PREFIX_PATH.

CMAKE_INSTALL_DEFAULT_COMPONENT_NAME
Default component used in install() commands.

If an install() command is used without the COMPONENT argument, these files
will be grouped into a default component. The name of this default install
component will be taken from this variable. It defaults to Unspecified.

CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS
Added in version 3.11.

Default permissions for directories created implicitly during installation
of files by install() and file(INSTALL).

If make install is invoked and directories are implicitly created they get
permissions set by CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS variable or
platform specific default permissions if the variable is not set.

Implicitly created directories are created if they are not explicitly in-
stalled by install() command but are needed to install a file on a certain
path. Example of such locations are directories created due to the setting
of CMAKE_INSTALL_PREFIX.

Expected content of the CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS vari-
able is a list of permissions that can be used by install() command PERMIS-
SIONS section.

Example usage:

set(CMAKE_INSTALL_DEFAULT_DIRECTORY_PERMISSIONS
OWNER_READ
OWNER_WRITE
OWNER_EXECUTE
GROUP_READ
)

CMAKE_INSTALL_MESSAGE
Added in version 3.1.

Specify verbosity of installation script code generated by the install()
command (using the file(INSTALL) command). For paths that are newly in-
stalled or updated, installation may print lines like:

-- Installing: /some/destination/path

For paths that are already up to date, installation may print lines like:

-- Up-to-date: /some/destination/path

The CMAKE_INSTALL_MESSAGE variable may be set to control which messages are
printed:

ALWAYS
Print both Installing and Up-to-date messages.

LAZY Print Installing but not Up-to-date messages.

NEVER Print neither Installing nor Up-to-date messages.

Other values have undefined behavior and may not be diagnosed.

If this variable is not set, the default behavior is ALWAYS.

CMAKE_INSTALL_PREFIX
Install directory used by install().

If make install is invoked or INSTALL is built, this directory is prepended
onto all install directories.

This variable defaults as follows:

* Added in version 3.29: If the CMAKE_INSTALL_PREFIX environment variable
is set, its value is used as default for this variable.

* c:/Program Files/${PROJECT_NAME} on Windows.

* /usr/local on UNIX platforms.

See CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT for how a project might
choose its own default.

On UNIX one can use the DESTDIR mechanism in order to relocate the whole
installation to a staging area. See the DESTDIR environment variable for
more information.

The installation prefix is also added to CMAKE_SYSTEM_PREFIX_PATH so that
find_package(), find_program(), find_library(), find_path(), and
find_file() will search the prefix for other software. This behavior can be
disabled by setting the CMAKE_FIND_NO_INSTALL_PREFIX to TRUE before the
first project() invocation.

NOTE:
Use the GNUInstallDirs module to provide GNU-style options for the lay-
out of directories within the installation.

The CMAKE_INSTALL_PREFIX may be defined when configuring a build tree to
set its installation prefix. Or, when using the cmake(1) command-line
tool's --install mode, one may specify a different prefix using the
--prefix option:

cmake --install . --prefix /my/install/prefix

CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT
Added in version 3.7.1.

CMake sets this variable to a TRUE value when the CMAKE_INSTALL_PREFIX has
just been initialized to its default value, typically on the first run of
CMake within a new build tree and the CMAKE_INSTALL_PREFIX environment
variable is not set on the first run of CMake. This can be used by project
code to change the default without overriding a user-provided value:

if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
set_property(CACHE CMAKE_INSTALL_PREFIX PROPERTY VALUE "/my/default")
endif()

CMAKE_KATE_FILES_MODE
Added in version 3.27.

This cache variable is used by the Kate project generator and controls to
what mode the files entry in the project file will be set. See
cmake-generators(7).

Possible values are AUTO, SVN, GIT, HG, FOSSIL and LIST.

When set to LIST, CMake will put the list of source files known to CMake in
the project file. When set to SVN, GIT, HG or FOSSIL, CMake will set the
generated project accordingly to Subversion, git, Mercurial or Fossil, and
Kate will then use the respective command line tool to retrieve the list of
files in the project. When unset or set to AUTO, CMake will try to detect
whether the source directory is part of a git or svn checkout or not, and
put the respective entry into the project file.

CMAKE_KATE_MAKE_ARGUMENTS
Added in version 3.0.

This cache variable is used by the Kate project generator. See
cmake-generators(7).

This variable holds arguments which are used when Kate invokes the make
tool. By default it is initialized to hold flags to enable parallel builds
(using -j typically).

CMAKE_LIBRARY_PATH
Semicolon-separated list of directories specifying a search path for the
find_library() command. By default it is empty, it is intended to be set
by the project.

There is also an environment variable CMAKE_LIBRARY_PATH, which is used as
an additional list of search directories.

See also CMAKE_SYSTEM_LIBRARY_PATH and CMAKE_PREFIX_PATH.

CMAKE_LINK_DIRECTORIES_BEFORE
Added in version 3.13.

Whether to append or prepend directories by default in link_directories().

This variable affects the default behavior of the link_directories() com-
mand. Setting this variable to ON is equivalent to using the BEFORE option
in all uses of that command.

CMAKE_LINK_LIBRARIES_ONLY_TARGETS
Added in version 3.23.

Set this variable to initialize the LINK_LIBRARIES_ONLY_TARGETS property of
non-imported targets when they are created. Setting it to true enables an
additional check that all items named by target_link_libraries() that can
be target names are actually names of existing targets. See the target
property documentation for details.

CMAKE_MAXIMUM_RECURSION_DEPTH
Added in version 3.14.

Maximum recursion depth for CMake scripts. It is intended to be set on the
command line with -DCMAKE_MAXIMUM_RECURSION_DEPTH=<x>, or within CMake-
Lists.txt by projects that require a large recursion depth. Projects that
set this variable should provide the user with a way to override it. For
example:

# About to perform deeply recursive actions
if(NOT CMAKE_MAXIMUM_RECURSION_DEPTH)
set(CMAKE_MAXIMUM_RECURSION_DEPTH 2000)
endif()

If it is not set, or is set to a non-integer value, a sensible default
limit is used. If the recursion limit is reached, the script terminates im-
mediately with a fatal error.

Calling any of the following commands increases the recursion depth:

* include()

* find_package()

* add_subdirectory()

* try_compile()

* ctest_read_custom_files()

* ctest_run_script() (unless NEW_PROCESS is specified)

* User-defined function()'s and macro()'s (note that function() and macro()
themselves don't increase recursion depth)

* Reading or writing variables that are being watched by a variable_watch()

See also the CMAKE_MAXIMUM_RECURSION_DEPTH environment variable.

CMAKE_MESSAGE_CONTEXT
Added in version 3.17.

When enabled by the cmake --log-context command line option or the
CMAKE_MESSAGE_CONTEXT_SHOW variable, the message() command converts the
CMAKE_MESSAGE_CONTEXT list into a dot-separated string surrounded by square
brackets and prepends it to each line for messages of log levels NOTICE and
below.

For logging contexts to work effectively, projects should generally APPEND
and POP_BACK an item to the current value of CMAKE_MESSAGE_CONTEXT rather
than replace it. Projects should not assume the message context at the top
of the source tree is empty, as there are scenarios where the context might
have already been set (e.g. hierarchical projects).

WARNING:
Valid context names are restricted to anything that could be used as a
CMake variable name. All names that begin with an underscore or the
string cmake_ are also reserved for use by CMake and should not be used
by projects.

Example:

function(bar)
list(APPEND CMAKE_MESSAGE_CONTEXT "bar")
message(VERBOSE "bar VERBOSE message")
endfunction()

function(baz)
list(APPEND CMAKE_MESSAGE_CONTEXT "baz")
message(DEBUG "baz DEBUG message")
endfunction()

function(foo)
list(APPEND CMAKE_MESSAGE_CONTEXT "foo")
bar()
message(TRACE "foo TRACE message")
baz()
endfunction()

list(APPEND CMAKE_MESSAGE_CONTEXT "top")

message(VERBOSE "Before `foo`")
foo()
message(VERBOSE "After `foo`")

list(POP_BACK CMAKE_MESSAGE_CONTEXT)

Which results in the following output:

-- [top] Before `foo`
-- [top.foo.bar] bar VERBOSE message
-- [top.foo] foo TRACE message
-- [top.foo.baz] baz DEBUG message
-- [top] After `foo`

CMAKE_MESSAGE_CONTEXT_SHOW
Added in version 3.17.

Setting this variable to true enables showing a context with each line
logged by the message() command (see CMAKE_MESSAGE_CONTEXT for how the con-
text itself is specified).

This variable is an alternative to providing the --log-context option on
the cmake command line. Whereas the command line option will apply only to
that one CMake run, setting CMAKE_MESSAGE_CONTEXT_SHOW to true as a cache
variable will ensure that subsequent CMake runs will continue to show the
message context.

Projects should not set CMAKE_MESSAGE_CONTEXT_SHOW. It is intended for
users so that they may control whether or not to include context with mes-
sages.

CMAKE_MESSAGE_INDENT
Added in version 3.16.

The message() command joins the strings from this list and for log levels
of NOTICE and below, it prepends the resultant string to each line of the
message.

Example:

list(APPEND listVar one two three)

message(VERBOSE [[Collected items in the "listVar":]])
list(APPEND CMAKE_MESSAGE_INDENT " ")

foreach(item IN LISTS listVar)
message(VERBOSE ${item})
endforeach()

list(POP_BACK CMAKE_MESSAGE_INDENT)
message(VERBOSE "No more indent")

Which results in the following output:

-- Collected items in the "listVar":
-- one
-- two
-- three
-- No more indent

CMAKE_MESSAGE_LOG_LEVEL
Added in version 3.17.

When set, this variable specifies the logging level used by the message()
command. Valid values are the same as those for the --log-level command
line option of the cmake(1) program. If this variable is set and the
--log-level command line option is given, the command line option takes
precedence.

The main advantage to using this variable is to make a log level persist
between CMake runs. Setting it as a cache variable will ensure that subse-
quent CMake runs will continue to use the chosen log level.

Projects should not set this variable, it is intended for users so that
they may control the log level according to their own needs.

Added in version 3.25: See the cmake_language() cmake_language command for
a way to query the current message logging level.

CMAKE_MFC_FLAG
Use the MFC library for an executable or dll.

Enables the use of the Microsoft Foundation Classes (MFC). It should be
set to 1 for the static MFC library, and 2 for the shared MFC library.
This is used in Visual Studio project files.

Usage example:

add_definitions(-D_AFXDLL)
set(CMAKE_MFC_FLAG 2)
add_executable(CMakeSetup WIN32 ${SRCS})

Contents of CMAKE_MFC_FLAG may use generator expressions.

CMAKE_MODULE_PATH
Semicolon-separated list of directories, represented using forward slashes,
specifying a search path for CMake modules to be loaded by the include() or
find_package() commands before checking the default modules that come with
CMake. By default it is empty. It is intended to be set by the project.

It's fairly common for a project to have a directory containing various
*.cmake files to assist in development. Adding the directory to the
CMAKE_MODULE_PATH simplifies loading them. For example, a project's
top-level CMakeLists.txt file may contain:

list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")

include(Foo) # Loads ${CMAKE_CURRENT_SOURCE_DIR}/cmake/Foo.cmake

find_package(Bar) # Loads ${CMAKE_CURRENT_SOURCE_DIR}/cmake/FindBar.cmake

CMAKE_POLICY_DEFAULT_CMP<NNNN>
Default for CMake Policy CMP<NNNN> when it is otherwise left unset.

Commands cmake_minimum_required(VERSION) and cmake_policy(VERSION) by de-
fault leave policies introduced after the given version unset. Set
CMAKE_POLICY_DEFAULT_CMP<NNNN> to OLD or NEW to specify the default for
policy CMP<NNNN>, where <NNNN> is the policy number.

This variable should not be set by a project in CMake code as a way to set
its own policies; use cmake_policy(SET) instead. This variable is meant to
externally set policies for which a project has not itself been updated:

* Users running CMake may set this variable in the cache (e.g. -DCMAKE_POL-
ICY_DEFAULT_CMP<NNNN>=<OLD|NEW>). Set it to OLD to quiet a policy warn-
ing while using old behavior or to NEW to try building the project with
new behavior.

* Projects may set this variable before a call to add_subdirectory() that
adds a third-party project in order to set its policies without modifying
third-party code.

CMAKE_POLICY_WARNING_CMP<NNNN>
Explicitly enable or disable the warning when CMake Policy CMP<NNNN> has
not been set explicitly by cmake_policy() or implicitly by
cmake_minimum_required(). This is meaningful only for the policies that do
not warn by default:

* CMAKE_POLICY_WARNING_CMP0025 controls the warning for policy CMP0025.

* CMAKE_POLICY_WARNING_CMP0047 controls the warning for policy CMP0047.

* CMAKE_POLICY_WARNING_CMP0056 controls the warning for policy CMP0056.

* CMAKE_POLICY_WARNING_CMP0060 controls the warning for policy CMP0060.

* CMAKE_POLICY_WARNING_CMP0065 controls the warning for policy CMP0065.

* CMAKE_POLICY_WARNING_CMP0066 controls the warning for policy CMP0066.

* CMAKE_POLICY_WARNING_CMP0067 controls the warning for policy CMP0067.

* CMAKE_POLICY_WARNING_CMP0082 controls the warning for policy CMP0082.

* CMAKE_POLICY_WARNING_CMP0089 controls the warning for policy CMP0089.

* CMAKE_POLICY_WARNING_CMP0102 controls the warning for policy CMP0102.

* CMAKE_POLICY_WARNING_CMP0112 controls the warning for policy CMP0112.

* CMAKE_POLICY_WARNING_CMP0116 controls the warning for policy CMP0116.

* CMAKE_POLICY_WARNING_CMP0126 controls the warning for policy CMP0126.

* CMAKE_POLICY_WARNING_CMP0128 controls the warning for policy CMP0128.

* CMAKE_POLICY_WARNING_CMP0129 controls the warning for policy CMP0129.

* CMAKE_POLICY_WARNING_CMP0133 controls the warning for policy CMP0133.

* CMAKE_POLICY_WARNING_CMP0172 controls the warning for policy CMP0172.

This variable should not be set by a project in CMake code. Project devel-
opers running CMake may set this variable in their cache to enable the
warning (e.g. -DCMAKE_POLICY_WARNING_CMP<NNNN>=ON). Alternatively, running
cmake(1) with the --debug-output, --trace, or --trace-expand option will
also enable the warning.

CMAKE_PREFIX_PATH
Semicolon-separated list of directories specifying installation prefixes to
be searched by the find_package(), find_program(), find_library(),
find_file(), and find_path() commands. Each command will add appropriate
subdirectories (like bin, lib, or include) as specified in its own documen-
tation.

By default this is empty. It is intended to be set by the project.

There is also an environment variable CMAKE_PREFIX_PATH, which is used as
an additional list of search prefixes.

See also CMAKE_SYSTEM_PREFIX_PATH, CMAKE_INCLUDE_PATH, CMAKE_LIBRARY_PATH,
CMAKE_PROGRAM_PATH, and CMAKE_IGNORE_PATH.

CMAKE_PROGRAM_PATH
Semicolon-separated list of directories specifying a search path for the
find_program() command. By default it is empty, it is intended to be set
by the project.

There is also an environment variable CMAKE_PROGRAM_PATH, which is used as
an additional list of search directories.

See also CMAKE_SYSTEM_PROGRAM_PATH and CMAKE_PREFIX_PATH.

CMAKE_PROJECT_INCLUDE
Added in version 3.15.

A CMake language file to be included as the last step of all project() com-
mand calls. This is intended for injecting custom code into project builds
without modifying their source. See Code Injection for a more detailed
discussion of files potentially included during a project() call.

Added in version 3.29: This variable can be a semicolon-separated list of
CMake language files to be included sequentially. It can also now refer to
module names to be found in CMAKE_MODULE_PATH or as a builtin CMake module.

See also the CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE,
CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE, CMAKE_PROJECT_INCLUDE_BEFORE,
and CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

CMAKE_PROJECT_INCLUDE_BEFORE
Added in version 3.15.

A CMake language file to be included as the first step of all project()
command calls. This is intended for injecting custom code into project
builds without modifying their source. See Code Injection for a more de-
tailed discussion of files potentially included during a project() call.

See also the CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE,
CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE, CMAKE_PROJECT_INCLUDE, and
CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE
A CMake language file to be included as the last step of any project() com-
mand calls that specify <PROJECT-NAME> as the project name. This is in-
tended for injecting custom code into project builds without modifying
their source. See Code Injection for a more detailed discussion of files
potentially included during a project() call.

See also the CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE,
CMAKE_PROJECT_INCLUDE, CMAKE_PROJECT_INCLUDE_BEFORE, and
CMAKE_PROJECT_TOP_LEVEL_INCLUDES variables.

CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE_BEFORE
Added in version 3.17.

A CMake language file to be included as the first step of any project()
command calls that specify <PROJECT-NAME> as the project name. This is in-
tended for injecting custom code into project builds without modifying
their source. See Code Injection for a more detailed discussion of files
potentially included during a project() call.

See also the CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE, CMAKE_PROJECT_INCLUDE,
CMAKE_PROJECT_INCLUDE_BEFORE, and CMAKE_PROJECT_TOP_LEVEL_INCLUDES vari-
ables.

CMAKE_PROJECT_TOP_LEVEL_INCLUDES
Added in version 3.24.

Semicolon-separated list of CMake language files to include as part of the
very first project() call. The files will be included immediately after
the toolchain file has been read (if one is specified) and platform vari-
ables have been set, but before any languages have been enabled. Therefore,
language-specific variables, including things like CMAKE_<LANG>_COMPILER,
might not be set. See Code Injection for a more detailed discussion of
files potentially included during a project() call.

Added in version 3.29: This variable can also now refer to module names to
be found in CMAKE_MODULE_PATH or builtin to CMake.

This variable is intended for specifying files that perform one-time setup
for the build. It provides an injection point for things like configuring
package managers, adding logic the user shares between projects (e.g.
defining their own custom build types), and so on. It is primarily for
users to add things specific to their environment, but not for specifying
the toolchain details (use CMAKE_TOOLCHAIN_FILE for that).

By default, this variable is empty. It is intended to be set by the user.

See also the following variables:

* CMAKE_SYSTEM_IGNORE_PREFIX_PATH

* CMAKE_SYSTEM_PREFIX_PATH

* CMAKE_SYSTEM_LIBRARY_PATH

* CMAKE_SYSTEM_INCLUDE_PATH

* CMAKE_SYSTEM_PROGRAM_PATH

CMAKE_SYSTEM_IGNORE_PREFIX_PATH
Added in version 3.23.

CMAKE_SYSTEM_IGNORE_PREFIX_PATH is populated by CMake as part of its plat-
form and toolchain setup. Its purpose is to ignore locations containing in-
compatible binaries meant for the host rather than the target platform.
The project or end user should not modify this variable, they should use
CMAKE_IGNORE_PREFIX_PATH instead.

See also the following variables:

* CMAKE_SYSTEM_IGNORE_PATH

* CMAKE_SYSTEM_PREFIX_PATH

* CMAKE_SYSTEM_LIBRARY_PATH

* CMAKE_SYSTEM_INCLUDE_PATH

* CMAKE_SYSTEM_PROGRAM_PATH

CMAKE_SYSTEM_INCLUDE_PATH
Semicolon-separated list of directories specifying a search path for the
find_file() and find_path() commands. By default this contains the stan-
dard directories for the current system. It is not intended to be modified
by the project; use CMAKE_INCLUDE_PATH for this. See also
CMAKE_SYSTEM_PREFIX_PATH.

CMAKE_SYSTEM_LIBRARY_PATH
Semicolon-separated list of directories specifying a search path for the
find_library() command. By default this contains the standard directories
for the current system. It is not intended to be modified by the project;
use CMAKE_LIBRARY_PATH for this. See also CMAKE_SYSTEM_PREFIX_PATH.

CMAKE_SYSTEM_PREFIX_PATH
Semicolon-separated list of directories specifying installation prefixes to
be searched by the find_package(), find_program(), find_library(),
find_file(), and find_path() commands. Each command will add appropriate
subdirectories (like bin, lib, or include) as specified in its own documen-
tation.

By default this contains the system directories for the current system, the
CMAKE_INSTALL_PREFIX, and the CMAKE_STAGING_PREFIX. The installation and
staging prefixes may be excluded by setting the
CMAKE_FIND_NO_INSTALL_PREFIX variable before the first project() invoca-
tion.

The system directories that are contained in CMAKE_SYSTEM_PREFIX_PATH are
locations that typically include installed software. An example being
/usr/local for UNIX based platforms. In addition to standard platform loca-
tions, CMake will also add values to CMAKE_SYSTEM_PREFIX_PATH based on en-
vironment variables. The environment variables and search locations that
CMake uses may evolve over time, as platforms and their conventions also
evolve. The following provides an indicative list of environment variables
and locations that CMake searches, but they are subject to change:

CrayLinuxEnvironment:

* ENV{SYSROOT_DIR}/

* ENV{SYSROOT_DIR}/usr

* ENV{SYSROOT_DIR}/usr/local

Darwin:

* ENV{SDKROOT}/usr When CMAKE_OSX_SYSROOT is not explicitly speci-
fied.

OpenBSD:

* ENV{LOCALBASE}

Unix:

* ENV{CONDA_PREFIX} when using a conda compiler

MSYSTEM environment with MinGW toolchain:
Added in version 3.28.

* ENV{MSYSTEM_PREFIX}/local

* ENV{MSYSTEM_PREFIX}

Windows:

* ENV{ProgramW6432}

* ENV{ProgramFiles}

* ENV{ProgramFiles(x86)}

* ENV{SystemDrive}/Program Files

* ENV{SystemDrive}/Program Files (x86)

CMAKE_SYSTEM_PREFIX_PATH is not intended to be modified by the project; use
CMAKE_PREFIX_PATH for this.

See also CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_SYSTEM_LIBRARY_PATH,
CMAKE_SYSTEM_PROGRAM_PATH, and CMAKE_SYSTEM_IGNORE_PATH.

CMAKE_SYSTEM_PROGRAM_PATH
Semicolon-separated list of directories specifying a search path for the
find_program() command. By default this contains the standard directories
for the current system. It is not intended to be modified by the project;
use CMAKE_PROGRAM_PATH for this. See also CMAKE_SYSTEM_PREFIX_PATH.

CMAKE_TLS_CAINFO
Specify the default value for the file(DOWNLOAD) and file(UPLOAD) commands'
TLS_CAINFO options. It is unset by default.

This variable is also used by the ExternalProject and FetchContent modules
for internal calls to file(DOWNLOAD).

CMAKE_TLS_VERIFY
Specify the default value for the file(DOWNLOAD) and file(UPLOAD) commands'
TLS_VERIFY options. If this variable is not set, the commands check the
CMAKE_TLS_VERIFY environment variable. If neither is set, the default is
on.

Changed in version 3.31: The default is on. Previously, the default was
off. Users may set the CMAKE_TLS_VERIFY environment variable to 0 to re-
store the old default.

This variable is also used by the ExternalProject and FetchContent modules
for internal calls to file(DOWNLOAD).

TLS verification can help provide confidence that one is connecting to the
desired server. When downloading known content, one should also use file
hashes to verify it.

set(CMAKE_TLS_VERIFY TRUE)

CMAKE_TLS_VERSION
Added in version 3.30.

Specify the default value for the file(DOWNLOAD) and file(UPLOAD) commands'
TLS_VERSION option. If this variable is not set, the commands check the
CMAKE_TLS_VERSION environment variable. If neither is set, the default is
TLS 1.2.

Changed in version 3.31: The default is TLS 1.2. Previously, no minimum
version was enforced by default.

The value may be one of:

* 1.0

* 1.1

* 1.2

* 1.3

This variable is also used by the ExternalProject and FetchContent modules
for internal calls to file(DOWNLOAD) and git clone.

CMAKE_USER_MAKE_RULES_OVERRIDE
Specify a CMake file that overrides platform information.

CMake loads the specified file while enabling support for each language
from either the project() or enable_language() commands. It is loaded af-
ter CMake's builtin compiler and platform information modules have been
loaded but before the information is used. The file may set platform in-
formation variables to override CMake's defaults. See
CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG> for the language-specific version of
this variable.

This feature is intended for use only in overriding information variables
that must be set before CMake builds its first test project to check that
the compiler for a language works. It should not be used to load a file in
cases that a normal include() will work. Use it only as a last resort for
behavior that cannot be achieved any other way. For example, one may set
the CMAKE_C_FLAGS_INIT variable to change the default value used to ini-
tialize the CMAKE_C_FLAGS variable before it is cached. The override file
should NOT be used to set anything that could be set after languages are
enabled, such as variables like CMAKE_RUNTIME_OUTPUT_DIRECTORY that affect
the placement of binaries. Information set in the file will be used for
try_compile() and try_run() builds too.

CMAKE_WARN_DEPRECATED
Whether to issue warnings for deprecated functionality.

If not FALSE, use of deprecated functionality will issue warnings. If this
variable is not set, CMake behaves as if it were set to TRUE.

When running cmake(1), this option can be enabled with the -Wdeprecated op-
tion, or disabled with the -Wno-deprecated option.

CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
Ask cmake_install.cmake script to warn each time a file with absolute IN-
STALL DESTINATION is encountered.

This variable is used by CMake-generated cmake_install.cmake scripts. If
one sets this variable to ON while running the script, it may get warning
messages from the script.

CMAKE_XCODE_GENERATE_SCHEME
Added in version 3.9.

If enabled, the Xcode generator will generate schema files. These are use-
ful to invoke analyze, archive, build-for-testing and test actions from the
command line.

This variable initializes the XCODE_GENERATE_SCHEME target property on all
targets.

CMAKE_XCODE_GENERATE_TOP_LEVEL_PROJECT_ONLY
Added in version 3.11.

If enabled, the Xcode generator will generate only a single Xcode project
file for the topmost project() command instead of generating one for every
project() command.

This could be useful to speed up the CMake generation step for large
projects and to work-around a bug in the ZERO_CHECK logic.

CMAKE_XCODE_LINK_BUILD_PHASE_MODE
Added in version 3.19.

This variable is used to initialize the XCODE_LINK_BUILD_PHASE_MODE prop-
erty on targets. It affects the methods that the Xcode generator uses to
link different kinds of libraries. Its default value is NONE.

CMAKE_XCODE_SCHEME_ADDRESS_SANITIZER
Added in version 3.13.

Whether to enable Address Sanitizer in the Diagnostics section of the gen-
erated Xcode scheme.

This variable initializes the XCODE_SCHEME_ADDRESS_SANITIZER property on
all targets.