cmdftp(1) General Commands Manual cmdftp(1) NAME cmdftp - command line File Transfer Protocol client SYNOPSIS cmdftp [ [OPTIONS] ] hostname DESCRIPTION cmdftp is an alternative client for the File Transfer Protocol. It is quite different from the default ftp(1) client, because it always uses passive mode for all data transfers, has a syntax that mimics the shell, has local and remote mode, supports multiple and recursive file transfers, has more complex commands like copy and move, permits remote and local text file viewing and editing, is able to detect network failures and resume the operation, may resume broken downloads between sessions, has tab completion like the shell for both local and remote file names, and has large file support. The ftp host to connect to must be specified on invocation ( parameter hostname ). First of all, the client will attempt autologin, using information provided in ~/.netrc ; if it fails, or the autologin feature has been disabled ( -n ), a user/password pair must be manually entered. By default, failure to login causes the program to quit; the number of manual login attempts can be altered with the -a option. The cmdftp prompt appears as soon as the login operation completes, and in- forms the user that the client is ready to receive commands: see COMMANDS: LIST section. The current directory is shown in the prompt if option -P has not been specified. The prompt does not appear at all if the quiet option ( -q ) has been spec- ified. There are many more options that control how cmdftp behaves: see OPTIONS section for a full list and description. Additionally, this client can interface with other programs using environ- ment variables: see ENVIRONMENT section. This program can be easily automated: see USAGE_NOTES section for tips and notes about the cmdftp netrc parser. OPTIONS -h show command line options and exit. If your system supports long options, then long option equivalents are shown. -v show version information and exit -p FTP_PORT specify the remote TCP port of the server (def:21) -b BUFFER_SIZE specify the size in KB of the transfer buffer (def:64) -t TIMEOUT_SEC broken connection check timeout in seconds (def:30) -a N_ATTEMPTS max number of manual login attempts before giving up -q be quiet (suppress copyright message, warnings and transfer progress) -D show debug output for FTP commands and responses -m disable manual login. Rely on autologin only. -n disable autologin (~/.netrc). Rely on manual login only. -g disable output paging -d disable forced ignore of dot-files -P disable path in prompt ENVIRONMENT PAGER refers to command p; sets the pager for file viewing and ls output. If the variable is not set, the output is simply not paged. EDITOR refers to command e, and is required to be able to edit local and remote files from cmdftp. If no editor is set in the EDITOR vari- able, the e command will not be available. HOME refers to the autologin feature, and is required to be able to use ~/.netrc (to find your home directory actually). It should be al- ready set on your system. Note: double check ~/.netrc file permis- sions! TMPDIR an alternative directory where cmdftp temporary files should be stored. COMMANDS: NOTES You will see that a lot of the commands resemble in names and behaviour similar Unix commands and shell builtins. However there are differences both in names and behaviour, and expecially on parameter passing (number of parameters are fixed in cmdftp), and in the fact that no command options are allowed. For example, the Unix cp command has an omonymous cp equivalent command in cmdftp; however, cmdftp cp command behaves like cp -r, and source and tar- get must be always specified using exactly two parameters (which may con- tain wildcards). Commands implementation do not generally rely on external software. The FTP (remote) implementation of the commands has been abstracted so local imple- mentation has been achieved with cost near zero. This has the additional benefit of making cmdftp also suited as a very small rescue tool usable even on broken Unix systems. The e command (edit file) is an exception because it needs a text editor (and an EDITOR env variable set) to work. There is also an exception in the form of the local dir command (get pretty list - introduced recently). This command tries to run "/bin/ls -l". How- ever on failure (you do not have /bin/ls) it uses the consuete internal im- plementation of the ls command and returns a normal (not pretty) list. COMMANDS: LIST h displays a slightly less descriptive version of this list l switch to local mode, following commands refer to local r switch to remote mode, following commands refer to remote pwd prompt working directory. Resembles /bin/pwd command. cd PATH change working directory to PATH. Resembles cd shell builtin. md PATH make new directory PATH. Resembles /bin/mkdir command. Alias: mkdir rd PATH remove empty directory PATH. Resembles /bin/rmdir command. Alias: rmdir rm MASK delete regular files matching MASK, skip directories. Resembles /bin/rm command. ls list current directory contents. Resembles /bin/ls command given with no parameters. ls MASK list files/dirs matching MASK. Resembles /bin/ls -d command. dir pretty list of files in current directory. Resembles /bin/ls -l com- mand given with no parameters. Local implementation really spawns /bin/ls in this case, and reverts to a normal (not pretty) list if /bin/ls is not present. cp SRC TRG copy SRC to TRG. Resembles /bin/cp -r command. mv SRC TRG move SRC to TRG. Resembles /bin/mv command. u MASK DIR upload files/dirs matching MASK into remote DIR (recurs) * Relative paths and completion are resolved locally in MASK, and remotely in DIR. d MASK DIR download files/dirs matching MASK into local DIR (recurs) * Relative paths and completion are resolved remotely in MASK, and locally in DIR. dr MASK DIR same as above, and if local file already exists, resume ** ren MASK FROM TO rename files matching MASK replacing the first occurrence of FROM to TO in the base name. This is similar to rename(1) but still differ- ent (parameter ordering, replacing only in basename). Alias: rename p FILE print contents of the FILE on the terminal. Resembles /bin/cat com- mand. Alias: cat e FILE edit FILE. Requires a working editor, and an EDITOR env variable set to that editor. q quit client quit|exit|bye aliases for q command <TAB> tab-completion for filenames. COMMAND NOTES * This transfer command is mode-independent. Also remember that cmdftp commands have a fixed number of parameters, so you MUST specify a target directory. If that dir does not exist, it is created. ** resuming has only sense between sessions, or if you explicitly in- terrupt the transfer using CTRL+C or equivalent, because cmdftp will automatically try to resume the current command (eventually recon- necting) if any network problems are detected. Also, using dr com- mand might be dangerous if used incorrecly, because if the incom- plete file is a DIFFERENT file instead (same name, different con- tent) the target file can be screwed up. If you did not understand the problem just use the basic d command and you will be fine. USAGE_NOTES Some tips to automate cmdftp: - use the autologin feature and provide valid login information in ~/.netrc : see netrc page for the full file format description. Some notes about cmdftp netrc parser follow near the end of this section. - use the quiet option ( -q ), although redirecting stdout and stderr to a logfile could be useful instead - store common command sequences in a file, then run cmdftp with stdin redirected - use things like cron ( crond(8), crontab(1) ) to execute cmdftp scripts periodically. ESCAPING The command line parser, and the cmdftp netrc parser both recognize the same C-like escape sequences. Those are: \a, \b, \f, \n, \t, \v, \xHH, (HH are hex digits) - use to specify a character \OOO, (OOO are octal digits) - use to specify a character Escaping other characters has the effect of getting that character. Use to escape special meaning characters, like \ itself or the space. Quotes have NO special meaning so don't quote your strings. Using these sequence is expecially useful to be able to work with filenames containing spaces, or login information containing spaces. Note however that actively using ftp directories and file names containing spaces and other problematic characters (\n, \r) is very discouraged, since FTP servers are allowed to refuse to list them, or refuse to process some commands on them. If you get mysterious errors, check your filename for exotic characters. Here is an example netrc which contains some of those escape sequences: machine somewhere.myhost.com login the\ spaced\ user password \x64eadly\040habit machine anotherhost.hisnet.org login with\\backslash password \tcrazy_tabs_in_pass\t default login anon\ymous password guest Again, see netrc man page to get the full netrc file format description. Note that 'account' and 'macdef' are currently NOT supported. SIGNALS SIGINT: sending this signal when no command is being processed causes the program to quit. During the processing of transfer commands, it is possible to interrupt them by sending the signal (CTRL+C for exam- ple). The client and the server will need some seconds to return in synch, and then the cmdftp prompt will be displayed again. If some command has been interrupted, and again a SIGINT arrives, cmdftp will abort. SIGPIPE: this signal is ignored. all other signals are left to their default handlers during execution. EXIT STATUS cmdftp exits with 0 on clean quit (quit command) or after displaying re- quested information through -h and -v options, but only when all output has been successfully written to stdout. If a failure on stdout is detected, -1 is returned instead. In all other cases (fatal errors), exit status is > 0. LIMITATIONS cmdftp has a very simplified readline replacement: there is no history and little support for cmdline editing. It is very easy to force cmdftp in an infinite loop by wrong use of cp com- mand (infinitely copying one directory into itself). There is no loop de- tection currently so beware. cmdftp uses passive mode FTP only by choice. cmdftp has no special proxy support. You can use real FTP proxies with cmdftp. See ftp.proxy for example. BUGS Please report any bugs you might find, using the trackers at savannah or sending email directly to the AUTHOR. AUTHOR Claudio Fontana <claudio@gnu.org> HOME PAGE http://savannah.nongnu.org/projects/cmdftp http://www.nongnu.org/cmdftp FILES ~/.netrc - autologin file SEE ALSO ftp(1), ftpd(8), netrc, RFC 959 Claudio Fontana 2009-02-13 cmdftp(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | COMMANDS: NOTES | COMMANDS: LIST | COMMAND NOTES | USAGE_NOTES | ESCAPING | SIGNALS | EXIT STATUS | LIMITATIONS | BUGS | AUTHOR | HOME PAGE | FILES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=cmdftp&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>