Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
dcmcrle(1)			  OFFIS	DCMTK			    dcmcrle(1)

NAME
       dcmcrle - Encode	DICOM file to RLE transfer syntax

SYNOPSIS
       dcmcrle [options] dcmfile-in dcmfile-out

DESCRIPTION
       The  dcmcrle  utility  reads  an	uncompressed DICOM image (dcmfile-in),
       performs	RLE compression	(i.e.  conversion  to  an  encapsulated	 DICOM
       transfer	 syntax)  and  writes  the  converted  image to	an output file
       (dcmfile-out).

PARAMETERS
       dcmfile-in   DICOM input	filename to be converted ("-" for stdin)

       dcmfile-out  DICOM output filename ("-" for stdout)

OPTIONS
   general options
	 -h   --help
		print this help	text and exit

	      --version
		print version information and exit

	      --arguments
		print expanded command line arguments

	 -q   --quiet
		quiet mode, print no warnings and errors

	 -v   --verbose
		verbose	mode, print processing details

	 -d   --debug
		debug mode, print debug	information

	 -ll  --log-level  [l]evel: string constant
		(fatal,	error, warn, info, debug, trace)
		use level l for	the logger

	 -lc  --log-config  [f]ilename:	string
		use config file	f for the logger

   input options
       input file format:

	 +f   --read-file
		read file format or data set (default)

	 +fo  --read-file-only
		read file format only

	 -f   --read-dataset
		read data set without file meta	information

       input transfer syntax:

	 -t=  --read-xfer-auto
		use TS recognition (default)

	 -td  --read-xfer-detect
		ignore TS specified in the file	meta header

	 -te  --read-xfer-little
		read with explicit VR little endian TS

	 -tb  --read-xfer-big
		read with explicit VR big endian TS

	 -ti  --read-xfer-implicit
		read with implicit VR little endian TS

   encapsulated	pixel data encoding options
       pixel data fragmentation:

	 +ff  --fragment-per-frame
		encode each frame as one fragment (default)

	 +fs  --fragment-size  [s]ize: integer
		limit fragment size to s kbytes	(non-standard)

       basic offset table encoding:

	 +ot  --offset-table-create
		create offset table (default)

	 -ot  --offset-table-empty
		leave offset table empty

       SOP Class UID:

	 +cd  --class-default
		keep SOP Class UID (default)

	 +cs  --class-sc
		convert	to Secondary Capture Image (implies --uid-always)

       SOP Instance UID:
	 +un  --uid-never
		never assign new UID (default)

	 +ua  --uid-always
		always assign new UID

   output options
       post-1993 value representations:

	 +u   --enable-new-vr
		enable support for new VRs (UN/UT) (default)

	 -u   --disable-new-vr
		disable	support	for new	VRs, convert to	OB

       group length encoding:

	 +g=  --group-length-recalc
		recalculate group lengths if present (default)

	 +g   --group-length-create
		always write with group	length elements

	 -g   --group-length-remove
		always write without group length elements

       length encoding in sequences and	items:

	 +e   --length-explicit
		write with explicit lengths (default)

	 -e   --length-undefined
		write with undefined lengths

       data set	trailing padding:

	 -p=  --padding-retain
		do not change padding (default)

	 -p   --padding-off
		no padding

	 +p   --padding-create	[f]ile-pad [i]tem-pad: integer
		align file on multiple of f bytes
		and items on multiple of i bytes

NOTES
       The dcmcrle utility compresses DICOM images  of	all  SOP  classes.  It
       processes  all  Pixel  Data  (7fe0,0010)	 elements in the dataset, i.e.
       compression is also performed on	an icon	image.

       Please note that	the DICOM standard does	 not  allow  for  storing  the
       pixel  data  with multiple fragments per	frame (when RLE	compression is
       used). So limiting the fragment size with  option  --fragment-size  (or
       +fs) may	result in a non-standard compliant DICOM image.

TRANSFER SYNTAXES
       dcmcrle	supports  the  following transfer syntaxes for input (dcmfile-
       in):

       LittleEndianImplicitTransferSyntax	      1.2.840.10008.1.2
       LittleEndianExplicitTransferSyntax	      1.2.840.10008.1.2.1
       DeflatedExplicitVRLittleEndianTransferSyntax   1.2.840.10008.1.2.1.99 (*)
       BigEndianExplicitTransferSyntax		      1.2.840.10008.1.2.2

       (*) if compiled with zlib support enabled

       dcmcrle supports	the following transfer syntaxes	for  output  (dcmfile-
       out):

       RLELosslessTransferSyntax		      1.2.840.10008.1.2.5

LOGGING
       The  level  of  logging	output	of  the	various	command	line tools and
       underlying libraries can	be specified by	the  user.  By	default,  only
       errors  and  warnings  are  written to the standard error stream. Using
       option --verbose	also informational messages  like  processing  details
       are  reported.  Option  --debug	can be used to get more	details	on the
       internal	activity, e.g. for debugging purposes.	Other  logging	levels
       can  be	selected  using	option --log-level. In --quiet mode only fatal
       errors are reported. In such very severe	error events, the  application
       will  usually  terminate.  For  more  details  on the different logging
       levels, see documentation of module 'oflog'.

       In case the logging output should be written to file  (optionally  with
       logfile	rotation),  to syslog (Unix) or	the event log (Windows)	option
       --log-config can	be used.  This	configuration  file  also  allows  for
       directing  only	certain	messages to a particular output	stream and for
       filtering certain messages based	on the	module	or  application	 where
       they  are  generated.  An  example  configuration  file	is provided in
       <etcdir>/logger.cfg.

COMMAND	LINE
       All command line	tools  use  the	 following  notation  for  parameters:
       square  brackets	 enclose  optional  values  (0-1), three trailing dots
       indicate	that multiple values are allowed (1-n),	a combination of  both
       means 0 to n values.

       Command line options are	distinguished from parameters by a leading '+'
       or  '-' sign, respectively. Usually, order and position of command line
       options are arbitrary (i.e. they	 can  appear  anywhere).  However,  if
       options	are  mutually exclusive	the rightmost appearance is used. This
       behavior	conforms to the	 standard  evaluation  rules  of  common  Unix
       shells.

       In  addition,  one  or more command files can be	specified using	an '@'
       sign as a prefix	to the filename	(e.g. @command.txt).  Such  a  command
       argument	 is  replaced  by  the	content	of the corresponding text file
       (multiple whitespaces are treated as a  single  separator  unless  they
       appear  between	two  quotation marks) prior to any further evaluation.
       Please note that	a command file cannot contain  another	command	 file.
       This  simple  but  effective  approach  allows  one to summarize	common
       combinations of options/parameters and  avoids  longish	and  confusing
       command lines (an example is provided in	file <datadir>/dumppat.txt).

ENVIRONMENT
       The  dcmcrle  utility  will  attempt  to	 load  DICOM data dictionaries
       specified in the	DCMDICTPATH environment	variable. By default, i.e.  if
       the   DCMDICTPATH   environment	 variable   is	 not   set,  the  file
       <datadir>/dicom.dic will	be loaded unless the dictionary	is built  into
       the application (default	for Windows).

       The   default   behavior	  should  be  preferred	 and  the  DCMDICTPATH
       environment variable only used when alternative data  dictionaries  are
       required.  The  DCMDICTPATH environment variable	has the	same format as
       the Unix	shell PATH variable in that a colon (':')  separates  entries.
       On  Windows systems, a semicolon	(';') is used as a separator. The data
       dictionary code will  attempt  to  load	each  file  specified  in  the
       DCMDICTPATH  environment	variable. It is	an error if no data dictionary
       can be loaded.

SEE ALSO
       dcmdrle(1)

COPYRIGHT
       Copyright (C) 2002-2024 by OFFIS	e.V., Escherweg	 2,  26121  Oldenburg,
       Germany.

Version	3.6.9			Wed Dec	11 2024			    dcmcrle(1)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dcmcrle&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>

home | help