dcmmklut(1) OFFIS DCMTK dcmmklut(1) NAME dcmmklut - Create DICOM look-up tables SYNOPSIS dcmmklut [options] dcmimg-out DESCRIPTION The dcmmklut utility allows one to create a variety of DICOM Modality, Pre- sentation and VOI look-up tables (LUT) and is intended for the creation of test images. The utility is able to read an existing DICOM image file, cre- ate a look up table according to the command line options, and write the new object back to file. It is also possible to create a new object con- taining the specified LUT without reading an existing DICOM image file. This is e.g. useful to simply store different look-up tables in a DICOM- like structure. As a default the output file is encoded with the same transfer syntax used for the input file, but the transfer syntax can also be specified as a command line option. The LUT data can be derived from the shape of a gamma curve (default for the gamma factor is 1) or imported from a file (currently the MAP format from Ulead's PhotoImpact and a simple text format are supported). The input and output width of the LUT can also be specified in the range allowed by the DICOM standard. The interpolation of the input range is done by a poly- nomial curve fitting algorithm. In addition to the DICOM output file the LUT data can also be exported to a tabbed text file which allows the easy visualization of the curves with a common spread sheet application (e.g. Microsoft Excel). PARAMETERS dcmimg-out DICOM output filename ("-" for stdout) OPTIONS general options -h --help print this help text and exit --version print version information and exit --arguments print expanded command line arguments -q --quiet quiet mode, print no warnings and errors -v --verbose verbose mode, print processing details -d --debug debug mode, print debug information -ll --log-level [l]evel: string constant (fatal, error, warn, info, debug, trace) use level l for the logger -lc --log-config [f]ilename: string use config file f for the logger LUT creation options LUT type: +Tm --modality create as Modality LUT +Tp --presentation create as Presentation LUT +Tv --voi create as VOI LUT (default) LUT placement: +Pa --add add to existing transform (default for and only with --voi) +Pr --replace replace existing transform (default for --modality and --presentation) LUT content: +Cg --gamma [g]amma: float use gamma value (default: 1.0) +Cm --map-file [f]ilename: string read input data from MAP file +Ct --text-file [f]ilename: string read input data from text file LUT options: +Og --inverse-gsdf apply inverse GSDF (print presentation LUT in OD) --min-density [v]alue: integer (0..65535, default: 20) set min density to v (in hundreds of OD) --max-density [v]alue: integer (0..65535, default: 300) set max density to v (in hundreds of OD) +Oi --illumination [v]alue: integer (0..65535, default: 2000) set illumination to v (in cd/m^2) +Or --reflection [v]alue: integer (0..65535, default: 10) set reflected ambient light to v (in cd/m^2) LUT structure: -b --bits [n]umber: integer create LUT with n bit values (8..16, default: 16) -e --entries [n]umber: integer create LUT with n entries (1..65536, default: 256) -f --first-mapped [n]umber: integer first input value mapped (-31768..65535, default: 0) -r --random [n]umber: unsigned integer perform n randomly selected permutations on the LUT -rs --random-seed [n]umber: unsigned integer initialize the random-number generator with n (default: 0, for reproducible results) -o --order [n]umber: integer use polynomial curve fitting algorithm with order n (0..99, default: 5) -E --explanation [n]ame: string LUT explanation (default: automatically created) LUT data alignment: -a --byte-align create byte-aligned LUT (default for and only with 8 bit values) +a --word-align create word-aligned LUT (default for 9-16 bit values) LUT data VR: +Dw --data-ow write LUT Data as OW (default) +Du --data-us write LUT Data as US +Ds --data-ss write LUT Data as SS (minimal support) file options +Fi --dicom-input [f]ilename: string read dataset from DICOM file f +Fo --text-output [f]ilename: string write LUT data to tabbed text file f NOTES Please check the DICOM standard for further restrictions on the look-up ta- ble structure. Especially the number of bits per table entry might be re- stricted in particular IODs. LOGGING The level of logging output of the various command line tools and underly- ing libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option --verbose also informational messages like processing details are reported. Option --debug can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option --log-level. In --quiet mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more de- tails on the different logging levels, see documentation of module 'oflog'. In case the logging output should be written to file (optionally with log- file rotation), to syslog (Unix) or the event log (Windows) option --log- config can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in <etcdir>/logger.cfg. COMMAND LINE All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n val- ues. Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mu- tually exclusive the rightmost appearance is used. This behavior conforms to the standard evaluation rules of common Unix shells. In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple white- spaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a com- mand file cannot contain another command file. This simple but effective approach allows one to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file <datadir>/dumppat.txt). ENVIRONMENT The dcmmklut utility will attempt to load DICOM data dictionaries specified in the DCMDICTPATH environment variable. By default, i.e. if the DCMDICT- PATH environment variable is not set, the file <datadir>/dicom.dic will be loaded unless the dictionary is built into the application (default for Windows). The default behavior should be preferred and the DCMDICTPATH environment variable only used when alternative data dictionaries are required. The DCMDICTPATH environment variable has the same format as the Unix shell PATH variable in that a colon (':') separates entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary code will at- tempt to load each file specified in the DCMDICTPATH environment variable. It is an error if no data dictionary can be loaded. FILES <datadir>/philips.lut - sample LUT in text format COPYRIGHT Copyright (C) 1998-2025 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Ger- many. Version 3.7.0 Mon Dec 15 2025 dcmmklut(1)
NAME | SYNOPSIS | DESCRIPTION | PARAMETERS | OPTIONS | NOTES | LOGGING | COMMAND LINE | ENVIRONMENT | FILES | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dcmmklut&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>