DKIMPROXY.OUT(1) User Contributed Perl Documentation DKIMPROXY.OUT(1) NAME dkimproxy.out - SMTP proxy for adding DKIM signatures to email SYNOPSIS dkimproxy.out [options] --keyfile=FILENAME --selector=SELECTOR \ --domain=DOMAIN LISTENADDR:PORT RELAYADDR:PORT smtp options: --conf_file=FILENAME --listen=LISTENADDR:PORT --relay=RELAYADDR:PORT --reject-error signing options: --signature=dkim|domainkeys --keyfile=FILENAME --selector=SELECTOR --method=simple|relaxed|nofws --domain=DOMAIN --identity=IDENTITY daemon options: --daemonize --user=USER --group=GROUP --pidfile=PIDFILE dkimproxy.out --help to see a full description of the various options DESCRIPTION This is the "outbound" part of DKIMproxy, used for adding DKIM/DomainKey signatures to "outbound" email messages. This program listens on a particu- lar TCP port (specified by the "listen" option), and sends the traffic it receives on to a destination TCP address/port (specified by the "relay" op- tion), with messages getting modified to have a DKIM and/or DomainKeys sig- nature added. DKIMproxy offers a number of options that determine how it generates signa- tures for the messages it processes. It can also vary its behavior accord- ing to the sender of the message it is processing. Read about the "sender map file" if you want to vary behavior according to sender. OPTIONS --daemonize If specified, the server will run in the background. --domain=DOMAIN This argument serves two purposes. First, it selects which messages (of all those DKIMproxy sees) that should be signed. Second, it specifies what d= value to put in the generated signatures. You can specify multiple domains by separating them with commas. If only one domain is specified, DKIMproxy will sign ALL messages, and it will use the specified domain as the d= value of all generated signa- tures. If two or more domains are specified, DKIMproxy will only sign messages which have a sender matching one of these domains. It will use the matched domain as the d= value of the generated signature. Please note that the d= value of the generated signature can also be specified using signature options (see "SIGNATURE OPTIONS"). The signa- ture options will override the value specified here. Therefore, if you want to sign all messages, and you are specifying a d= value as part of the "signature" argument, or within a sender map file or list-id map file, you can omit the "domain" argument. --group=GROUP If specified, the daemonized process will setgid() to the specified GROUP. --identity=IDENTITY If specified, any DKIM signature created will have an i= argument con- taining the value specified. --keyfile=FILENAME This is a required argument. Use it to specify the filename containing the private key used in signing outgoing messages. For messages to ver- ify, you will need to publish the corresponding public key in DNS, us- ing the selector name specified by "--selector", under the domain(s) specified in "--domain". --listid_map=FILENAME If specified, the named file provides signature parameters depending on the "List-Id" header found in the message. Use this if your mail server sends out mailing list messages and you want to generate different sig- natures depending on which mailing list is sending messages. See the section below titled "LIST-ID MAP FILE". --method=simple|relaxed|nofws This option specifies the canonicalization algorithm to use for signing messages. For DKIM signatures, the options are "simple", "relaxed", and "relaxed/relaxed"; the default is "relaxed". For DomainKeys signatures, the options are "simple" and "nofws"; the default is "nofws". --pidfile=PIDFILE Creates a PID file (a file containing the PID of the process) for the daemonized process. This makes it possible to check the status of the process, and to cleanly shut it down. --reject-error This option specifies what to do if an error occurs during signing of a message. If this option is specified, the message will be rejected with an SMTP error code. This will result in the MTA sending the message to try again later, or bounce it back to the sender (depending on the ex- act error code used). If this option is not specified, the message will be allowed to pass through without having a signature added. The most common cause of an error when signing a message is if the sig- nature options are improperly configured. --selector=SELECTOR This is a required argument. Use it to specify the name of the key se- lector. --sender_map=FILENAME If specified, the named file provides signature parameters depending on what sender is found in the message. See the section below titled "SENDER MAP FILE". --signature=dkim|domainkeys This specifies what type of signature to add. Use "dkim" to sign with IETF-standardized DKIM signatures. Use "domainkeys" to sign with the older, but more common, Yahoo! DomainKeys signatures. The default is "dkim". This parameter can be specified more than once to add more than one signature to the message. In addition, per-signature parameters can be specified by enclosing the comma-separated options in parenthesis after the signature type, e.g. --signature=dkim(c=relaxed,key=/path/to/private.key) The syntax for specifying per-signature options is described in more detail in the section below titled "SIGNATURE OPTIONS". --user=USER If specified, the daemonized process will setuid() to USER after com- pleting any necessary privileged operations, but before accepting con- nections. EXAMPLE For example, if dkimproxy.out is started with: dkimproxy.out --keyfile=private.key --selector=postfix \ --domain=example.org 127.0.0.1:10027 127.0.0.1:10028 the proxy will listen on port 10027 and send the signed messages to some other SMTP service on port 10028. CONFIGURATION FILE Parameters can be stored in a separate file instead of specifying them all on the command-line. Use the "conf_file" option to specify the path to the configuration file, e.g. dkimproxy.out --conf_file=/etc/dkimproxy_out.conf The format of the configuration file is one option per line: name of the option, space, then the value of the option. E.g. # this is an example config file domain example.org,example.com keyfile private.key selector postfix signature dkim is equivalent to dkimproxy.out --domain=example.org,example.com --keyfile=private.key \ --selector=postfix --signature=dkim SIGNATURE OPTIONS When specifying a signature type, you may optionally specify per-signature options within parenthesis after the signature type. E.g. if you say dkim(d=example.com,c=relaxed,a=rsa-sha1) Then DKIMproxy will add a "DKIM" signature with domain "example.com", using the "relaxed" canonicalization method, and the "rsa-sha1" algorithm. The following signature options are recognized: key the private key file to use. You must specify the full path to the private key file. a, algorithm the algorithm to use c, method the canonicalization method to use d, domain the domain to use, default is to use whichever domain was matched (i.e. one of the domains specified in the --domain argument, or the domain found in the sender map file.) You may also use macros for this parameter, such as $senderdomain. See the section on "MACROS" for more information. i, identity the identity to use, default is to not include an i= parameter. You may also use macros for this parameter, such as $sender. See the section on "MACROS" for more information. s, selector the selector to use MACROS When specifying signature options, specifically the "domain" and "identity" options, you may want to substitute values from the message being signed. The following macros are available: $sender Substitutes the sender's email address (as found in the Sender or From header). $senderdomain Substitutes the domain part of the sender's email address. SENDER MAP FILE If you want to use different signature properties depending on the sender of the message being signed, use a "sender map file". This is a lookup file containing sender email addresses on the left and signature properties on the right. E.g. # sign my mail with a EXAMPLE.COM dkim signature jason@long.name dkim(d=example.com) # sign WIDGET.EXAMPLE mail with a default domainkeys signature widget.example domainkeys # sign EXAMPLE.ORG mail with both a domainkeys and dkim signature example.org dkim(c=relaxed,a=rsa-sha256), domainkeys(c=nofws) Right-hand values in a sender map file is a comma-separated list of signa- ture types. Each signature type may have a comma-separated list of parame- ters enclosed in parenthesis. See "SIGNATURE OPTIONS" for more information about the recognized parameters. Please note that DKIMproxy tries hard to match a given message to an entry in the sender map file. If the full domain of the message's sender is not in the file, it tries each parent domain of the message's sender until a match is found. E.g. if the sender map file contains the following con- tents: a.my.example dkim(key=key1) my.example dkim(key=key2) Then a message from user1@a.my.example will be signed with key key1. A message from user2@b.my.example will be signed with key2. A message from user3@your.example will not be signed. LIST-ID MAP FILE This works very much like a sender map file, except it selects based on the "List-Id" header rather than the "Sender" or "From" header. You can match on the full list-id value, or just a suffix. Here is an example file: kernel.org dkim(d=kernel.org) xorg-devel.lists.x.org dkim(d=lists.x.org) dev.spamassassin.apache.org dkim(d=apache.org) The syntax of the right-hand values is the same as a sender map file, i.e. a comma-separated list of signatures to add to the message. For more de- tails, see "SIGNATURE OPTIONS" above. If no "List-Id" header is found in the message to be signed, or no entry in the map file matches the found "List-Id" header, then DKIMproxy will pro- ceed as if no listid_map option was specified. That is, it will add the default signature (if a "domain" or "signature" option was specified), or leave the message as is. AUTHOR Jason Long perl v5.42.3 2026-08-30 DKIMPROXY.OUT(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLE | CONFIGURATION FILE | SIGNATURE OPTIONS | MACROS | SENDER MAP FILE | LIST-ID MAP FILE | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dkimproxy_out&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>