FreeBSD Manual Pages
DSPOOLOUT(8) System Manager's Manual DSPOOLOUT(8) NAME dspoolout - Diablo program to sequence and flush outbound queue files SYNOPSIS dspoolout [ -q ] [ -v ] [ -n ] [ -s minutes ] [ -m maxrun ] [ -T txbufsize ] [ -R rxbufsize ] [ -B ip ] [ -f configfile ] [ label ] DESCRIPTION DSpoolout reads the dnntpspool.ctl file and applies a sequence number to the outbound queue files maintained by diablo in the dqueue directory. This involves renaming each queue file then running a dicmd to flush them. DSpoolout is normally run from cron once every 5 minutes. The control file tells DSpoolout how many queue files to maintain for any given outbound feed and how many dnewslink processes to run in parallel for each outbound feed. The default is 2, and may be changed by the -m maxrun option. The dnewslink program itself is able to process multiple queue files in se- quence, and judicious use of flock() prevents collisions when multiple processes are run on the same range of sequence numbers. DSpoolout manages the whole affair. DSpoolout can also run smart based on whether the feeds are able to stay caught up. The -s minutes option tells DSpoolout how of- ten to sequence out a new outbound queue file and (potentially) run more dnewslinks when the feed is unable to stay caught up with our queue files. If the feed is able to stay caught up, the option is ignored and DSpoolout attempts to handle the feed every time it is run. This allows you to re- duce the requeueing latency between incoming and outgoing feeds for those feeds able to handle your article rate without overloading the machine when you have many feeds. The -B option causes DSpoolout to pass the specified IP address to dnewslink, specifying the local address to be used for all outbound NNTP sessions. The -n option causes dspoolout to flush and rotate the queue files without executing any dnewslink's. An optional queue label may be specified to restrict dspoolout's operation to a single entry. Otherwise, all entries are run. -f configfile Specify a configuration file other then dspoolout.ctl. If the configuration file is not an absolute path, diablo's news home is prepended to it. The -T and -R options set the transmit and receive TCP buffer size for dnewslink. The defaults are usually ok, but if you want to be frugal you can usually reduce the receive buffer size without blowing the efficiency. It is suggested, however, that you run DSpoolout from cron no more then once every 5 minutes. Heavy backbone transit points with lots of cpu cy- cles can get away with running DSpoolout every 2 minutes if they really want to, in which case the -s option really comes in handy. A typical news path of 8 elements will propogate in 5x8 = 40 minutes with a 5 minute queue run, and 16 minutes with a 2 minute queue run. Many people proscribe real-time feeds. Diablo tries to avoid real-time feeds for two reasons: First, they add complexity to the main server and the additional system calls slow it down. Second, real time feeds can lead to a false sense of security and efficiency. While it is true that a real- time feed will make better use of the kernel file cache then a queued feed, very few news servers can dependably rely on this to maintain their feed rates... they MUST be designed to handle article delays and failures. A server running too close to the edge will experience a NASTY cascade fail- ure if it relies on the efficiency of the real time feed to maintain the article feed rate. REALTIME FEEDS DSpoolout is capable of maintaining a dnewslink on designated realtime feeds. A feed is specified as being realtime by using the 'realtime' op- tion in the dnntpspool.ctl file (see the sample dnntpspool.ctl file). This is really only a near-real-time capability, since Diablo buffer's writes to outgoing queue files. For a nominal full feed, the delay is approximately 5 seconds. The way it works is as follows: dspoolout starts a dnewslink with the -r option on the active outgoing feed file. DSpoolout also operates normally, attempting to start dnewslinks on any existing queue files up to a speci- fied limit. When dspoolout is next run, it flushes and rotates as per nor- mal. The dnewslink -r sitting on the active file will get it renamed out from under. It detects this condition and closes/reopens the new active file as well as aattempts to remove the old one if it has finished process- ing it and no errors occured. SEE ALSO diablo(8), dicmd(8), didump(8), diload(8), dnewslink(8), doutq(8), dex- pire(8), dexpireover(8), diconvhist(8), dilookup(8), dspoolout(8), dkp(8), dpath(8), diablo-kp(5), diablo-files(5) DSPOOLOUT(8)
NAME | SYNOPSIS | DESCRIPTION | REALTIME FEEDS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dspoolout&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>