FreeBSD Manual Pages
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME fence_idrac - Fence agent for IPMI fence_ilo3 - Fence agent for HP iLO3 (symlink) fence_ilo4 - Fence agent for HP iLO4 (symlink) fence_ilo5 - Fence agent for HP iLO5 (symlink) fence_ipmilanplus - Fence agent for IPMIv2 lanplus (symlink) fence_imm - Fence agent for IBM Integrated Management Module (symlink) fence_idrac - Fence agent for Dell iDRAC (symlink) DESCRIPTION fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report suc- cess before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option. fence_idrac accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_idrac can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: PARAMETERS -o, --action=[action] Fencing action (Default Value: reboot) -A, --auth=[auth] IPMI Lan Auth type. (md5|password|none) -C, --cipher=[cipher] Ciphersuite to use (same as ipmitool -C parameter) --hexadecimal-kg=[key] Hexadecimal-encoded Kg key for IPMIv2 authentication -a, --ip=[ip] IP address or hostname of fencing device -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 623) -P, --lanplus Use Lanplus to improve security of connection (Default Value: 0) -m, --method=[method] Method to fence (onoff|cycle) (Default Value: onoff) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[ip] IP address or hostname of fencing device (together with --port- as-ip) -L, --privlvl=[level] Privilege level on IPMI device (callback|user|operator|adminis- trator) (Default Value: administrator) --target=[targetaddress] Bridge IPMI requests to the remote target address -l, --username=[name] Login name -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) --ipmitool-path=[path] Path to ipmitool binary (Default Value: /usr/bin/ipmitool) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --port-as-ip Make "port/plug" to be an alias to IP address --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 2) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --ipmitool-timeout=[timeout] Timeout (sec) for IPMI operation (Default Value: 2) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --use-sudo Use sudo (without password) when calling 3rd party software --sudo-path=[path] Path to sudo binary (Default Value: /usr/bin/sudo) ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. diag Pulse a diagnostic interrupt to the processor(s). STDIN PARAMETERS action Fencing action (Default Value: reboot) auth IPMI Lan Auth type. (md5|password|none) cipher Ciphersuite to use (same as ipmitool -C parameter) hexadecimal_kg Hexadecimal-encoded Kg key for IPMIv2 authentication ip IP address or hostname of fencing device Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 623) lanplus Use Lanplus to improve security of connection (Default Value: 0) method Method to fence (onoff|cycle) (Default Value: onoff) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug IP address or hostname of fencing device (together with --port- as-ip) Obsoletes: port privlvl Privilege level on IPMI device (callback|user|operator|adminis- trator) (Default Value: administrator) target Bridge IPMI requests to the remote target address username Login name Obsoletes: login quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) ipmitool_path Path to ipmitool binary (Default Value: /usr/bin/ipmitool) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) port_as_ip Make "port/plug" to be an alias to IP address power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 2) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) ipmitool_timeout Timeout (sec) for IPMI operation (Default Value: 2) retry_on Count of attempts to retry power on (Default Value: 1) use_sudo Use sudo (without password) when calling 3rd party software Ob- soletes: sudo sudo_path Path to sudo binary (Default Value: /usr/bin/sudo) fence_idrac (Fence Agent) 2009-10-20 FENCE_AGENT(8)
NAME | DESCRIPTION | PARAMETERS | ACTIONS | STDIN PARAMETERS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_idrac&sektion=8&manpath=FreeBSD+Ports+15.0>