FreeBSD Manual Pages
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME fence_intelmodular - Fence agent for Intel Modular DESCRIPTION fence_intelmodular is an I/O Fencing agent which can be used with Intel Modular device (tested on Intel MFSYS25, should work with MFSYS35 as well). Note: Since firmware update version 2.7, SNMP v2 write support is re- moved, and replaced by SNMP v3 support. So agent now has default SNMP version 3. If you are using older firmware, please supply -d for com- mand line and snmp_version option for your cluster.conf. fence_intelmodular accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_intelmodular can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.intel.com PARAMETERS -o, --action=[action] Fencing action (Default Value: reboot) -c, --community=[community] Set the community string -a, --ip=[ip] IP address or hostname of fencing device This parameter is al- ways required. -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 161) -p, --password=[password] Login password or passphrase -S, --password-script=[script] Script to run to retrieve password -n, --plug=[id] Physical plug number on device, UUID or identification of ma- chine This parameter is always required. -b, --snmp-auth-prot=[prot] Set authentication protocol (MD5|SHA) -P, --snmp-priv-passwd=[pass] Set privacy protocol password -R, --snmp-priv-passwd-script Script to run to retrieve privacy password -B, --snmp-priv-prot=[prot] Set privacy protocol (DES|AES) -E, --snmp-sec-level=[level] Set security level (noAuthNoPriv|authNoPriv|authPriv) -d, --snmp-version=[version] Specifies SNMP version to use (1|2c|3) -l, --username=[name] Login name -q, --quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. -v, --verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. --verbose-level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --plug-separator=[char] Separator for plug parameter when specifying more than 1 plug (Default Value: ,) -C, --separator=[char] Separator for CSV created by 'list' operation (Default Value: ,) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --disable-timeout=[true/false] Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --stonith-status-sleep=[seconds] Sleep X seconds between status calls during a STONITH action (Default Value: 1) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) --snmpget-path=[path] Path to snmpget binary (Default Value: /usr/bin/snmpget) --snmpset-path=[path] Path to snmpset binary (Default Value: /usr/bin/snmpset) --snmpwalk-path=[path] Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk) ACTIONS on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. list-status List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands. monitor Check the health of fence device metadata Display the XML metadata describing this resource. manpage The operational behavior of this is not known. validate-all Validate if all required parameters are entered. STDIN PARAMETERS action Fencing action (Default Value: reboot) community Set the community string ip IP address or hostname of fencing device This parameter is al- ways required. Obsoletes: ipaddr ipport TCP/UDP port to use for connection with device (Default Value: 161) password Login password or passphrase Obsoletes: passwd password_script Script to run to retrieve password Obsoletes: passwd_script plug Physical plug number on device, UUID or identification of ma- chine This parameter is always required. Obsoletes: port snmp_auth_prot Set authentication protocol (MD5|SHA) snmp_priv_passwd Set privacy protocol password snmp_priv_passwd_script Script to run to retrieve privacy password snmp_priv_prot Set privacy protocol (DES|AES) snmp_sec_level Set security level (noAuthNoPriv|authNoPriv|authPriv) snmp_version Specifies SNMP version to use (1|2c|3) username Login name Obsoletes: login quiet Disable logging to stderr. Does not affect --verbose or --debug- file or logging to syslog. verbose Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity. verbose_level Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if ver- bose=1 in a stonith device configuration (i.e., on stdin). debug_file Write debug information to given file Obsoletes: debug version Display version information and exit help Display help and exit plug_separator Separator for plug parameter when specifying more than 1 plug (Default Value: ,) separator Separator for CSV created by 'list' operation (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) disable_timeout Disable timeout (true/false) (default: true when run from Pace- maker 2.0+) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) stonith_status_sleep Sleep X seconds between status calls during a STONITH action (Default Value: 1) retry_on Count of attempts to retry power on (Default Value: 1) snmpget_path Path to snmpget binary (Default Value: /usr/bin/snmpget) snmpset_path Path to snmpset binary (Default Value: /usr/bin/snmpset) snmpwalk_path Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk) fence_intelmodular (Fence Agent) 2009-10-20 FENCE_AGENT(8)
NAME | DESCRIPTION | PARAMETERS | ACTIONS | STDIN PARAMETERS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fence_intelmodular&sektion=8&manpath=FreeBSD+Ports+15.0>