FreeBSD Manual Pages
GDAL-VECTOR-MAKE-VALID(1) GDAL GDAL-VECTOR-MAKE-VALID(1) NAME gdal-vector-make-valid - Fix validity of geometries of a vector dataset Added in version 3.12. SYNOPSIS Usage: gdal vector make-valid [OPTIONS] <INPUT> <OUTPUT> Fix validity of geometries of a vector dataset. Positional arguments: -i, --input <INPUT> Input vector datasets [required] [not available in pipelines] -o, --output <OUTPUT> Output vector dataset [required] [not available in pipelines] Common Options: -h, --help Display help message and exit --json-usage Display usage as JSON document and exit --config <KEY>=<VALUE> Configuration option [may be repeated] -q, --quiet Quiet mode (no progress bar or warning message) [not available in pipelines] Options: -l, --layer, --input-layer <INPUT-LAYER> Input layer name(s) [may be repeated] [not available in pipelines] -f, --of, --format, --output-format <OUTPUT-FORMAT> Output format ("GDALG" allowed) [not available in pipelines] --co, --creation-option <KEY>=<VALUE> Creation option [may be repeated] [not available in pipelines] --lco, --layer-creation-option <KEY>=<VALUE> Layer creation option [may be repeated] [not available in pipelines] --overwrite Whether overwriting existing output dataset is allowed [not available in pipelines] --update Whether to open existing dataset in update mode [not available in pipelines] --overwrite-layer Whether overwriting existing output layer is allowed [not available in pipelines] --append Whether appending to existing layer is allowed [not available in pipelines] Mutually exclusive with --upsert --output-layer <OUTPUT-LAYER> Output layer name [not available in pipelines] --skip-errors Skip errors when writing features [not available in pipelines] --active-layer <ACTIVE-LAYER> Set active layer (if not specified, all) --active-geometry <ACTIVE-GEOMETRY> Geometry field name to which to restrict the processing (if not specified, all) --method <METHOD> Algorithm to use when repairing invalid geometries.. METHOD=linework|structure (default: linework) --keep-lower-dim Keep components of lower dimension after MakeValid() Advanced Options: --if, --input-format <INPUT-FORMAT> Input formats [may be repeated] [not available in pipelines] --oo, --open-option <KEY>=<VALUE> Open options [may be repeated] [not available in pipelines] --output-oo, --output-open-option <KEY>=<VALUE> Output open options [may be repeated] [not available in pipelines] --upsert Upsert features (implies 'append') [not available in pipelines] Mutually exclusive with --append DESCRIPTION gdal vector make-valid ensures that geometries are valid regarding the rules of the Simple Features specification. It runs the OGRGeometry::MakeValid() operation, followed by OGRGeometryFactory::removeLowerDimensionSubGeoms() (unless --keep-lower-dim is set) It can also be used as a step of gdal vector pipeline. NOTE: This command requires a GDAL build against the GEOS library. GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET) This program supports serializing the command line as a JSON file using the GDALG output format. The resulting file can then be opened as a vector dataset using the GDALG: GDAL Streamed Algorithm driver, and apply the specified pipeline in a on-the-fly / streamed way. PROGRAM-SPECIFIC OPTIONS --keep-lower-dim Keep components of lower dimension after MakeValid(). For example, MakeValid() may return a GeometryCollection of a Polygon and a LineString from a Polygon input. By default only the Polygon would be returned. Setting this option will return the GeometryCollection. --method=linework|structure Algorithm to use when repairing invalid geometries. The default linework method combines all rings into a set of noded lines and then extracts valid polygons from that linework. This method keeps all input vertices. The structure method (only available with GEOS >= 3.10) first makes all rings valid then merges shells and subtracts holes from shells to generate valid result. It assumes that holes and shells are cor- rectly categorized. For examples of the differences between these methods, see Geometry Validity. STANDARD OPTIONS --active-geometry <ACTIVE-GEOMETRY> Set the active geometry field from its name. When it is specified, only the specified geometry field will be subject to the processing. Other geometry fields will be not modified. If this option is not specified, all geometry fields will be subject to the processing. This option can be combined together with --active-layer. --active-layer <ACTIVE-LAYER> Set the active layer. When it is specified, only the layer specified by its name will be subject to the processing. Other layers will be not modified. If this option is not specified, all layers will be subject to the processing. --append Whether appending features to existing layer(s) is allowed. This also creates the output dataset if it does not exist yet. --co, --creation-option <NAME>=<VALUE> Many formats have one or more optional dataset creation options that can be used to control particulars about the file created. For in- stance, the GeoPackage driver supports creation options to control the version. May be repeated. The dataset creation options available vary by format driver, and some simple formats have no creation options at all. A list of op- tions supported for a format can be listed with the --formats com- mand line option but the documentation for the format is the defini- tive source of information on driver creation options. See Vector drivers format specific documentation for legal creation options for each format. Note that dataset creation options are different from layer creation options. --if, --input-format <format> Format/driver name to be attempted to open the input file(s). It is generally not necessary to specify it, but it can be used to skip automatic driver detection, when it fails to select the appropriate driver. This option can be repeated several times to specify sev- eral candidate drivers. Note that it does not force those drivers to open the dataset. In particular, some drivers have requirements on file extensions. May be repeated. --input-layer <INPUT-LAYER> Specifies the name of one or more layers to process. By default, all layers will be processed. To read and write all layers but only process a subset, use --active-layer. --lco, --layer-creation-option <NAME>=<VALUE> Many formats have one or more optional layer creation options that can be used to control particulars about the layer created. For in- stance, the GeoPackage driver supports layer creation options to control the feature identifier or geometry column name, setting the identifier or description, etc. May be repeated. The layer creation options available vary by format driver, and some simple formats have no layer creation options at all. A list of op- tions supported for a format can be listed with the --formats com- mand line option but the documentation for the format is the defini- tive source of information on driver creation options. See Vector drivers format specific documentation for legal creation options for each format. Note that layer creation options are different from dataset creation options. --oo, --open-option <NAME>=<VALUE> Dataset open option (format specific). May be repeated. -f, --of, --format, --output-format <OUTPUT-FORMAT> Which output vector format to use. Allowed values may be given by gdal --formats | grep vector | grep rw | sort --output-layer <NAME> Specifies the name of the layer to which features will be written. If not specified, output layer names will be the same as input layer names. --output-open-option, --output-oo <NAME>=<VALUE> Added in version 3.12. Dataset open option for output dataset (format specific). May be repeated. --overwrite Allow program to overwrite existing target file or dataset. Other- wise, by default, gdal errors out if the target file or dataset al- ready exists. --overwrite-layer Whether overwriting the existing output vector layer is allowed. --skip-errors Added in version 3.12. Whether failures to write feature(s) should be ignored. Note that this option sets the size of the transaction unit to one feature at a time, which may cause severe slowdown when inserting into data- bases. --update Whether to open an existing output dataset in update mode. --upsert Added in version 3.12. Variant of --append where the OGRLayer::UpsertFeature() operation is used to insert or update features instead of appending with OGRLayer::CreateFeature(). This is currently implemented only in a few drivers: GPKG -- GeoPackage vector, Elasticsearch: Geographically Encoded Objects for Elasticsearch and MongoDBv3 (drivers that implement upsert expose the GDAL_DCAP_UPSERT capability). The upsert operation uses the FID of the input feature, when it is set (and the FID column name is not the empty string), as the key to update existing features. It is crucial to make sure that the FID in the source and target layers are consistent. For the GPKG driver, it is also possible to upsert features whose FID is unset or non-significant (the --unset-fid option of gdal vec- tor edit can be used to ignore the FID from the source feature), when there is a UNIQUE column that is not the integer primary key. RETURN STATUS CODE The program returns status code 0 in case of success, and non-zero in case of error (non-blocking errors emitted as warnings are considered as a suc- cessful execution). EXAMPLES Example 1: Basic use of make-valid $ gdal vector make-valid in.gpkg out.gpkg --overwrite AUTHOR Even Rouault <even.rouault@spatialys.com> COPYRIGHT 1998-2026 Jun 05, 2026 GDAL-VECTOR-MAKE-VALID(1)
NAME | SYNOPSIS | DESCRIPTION | GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET) | PROGRAM-SPECIFIC OPTIONS | STANDARD OPTIONS | RETURN STATUS CODE | EXAMPLES | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gdal-vector-make-valid&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>