FreeBSD Manual Pages
GDNSD(8) gdnsd GDNSD(8) NAME gdnsd - An authoritative DNS daemon SYNOPSIS Usage: gdnsd [-c /usr/local/etc/gdnsd] [-D] [-l] [-S] [-R | -i] <action> -c - Configuration directory (default /usr/local/etc/gdnsd) -D - Enable verbose debug output -l - Send logs to syslog rather than stderr -S - Force 'zones_strict_data = true' for this invocation -R - Attempt downtimeless replacement of another instance -i - Idempotent mode for start/daemonize: exit 0 if already running (-R and -i cannot be used together) Actions: checkconf - Checks validity of config and zone files start - Start as a regular foreground process daemonize - Start as a background daemon (implies -l) DESCRIPTION gdnsd is very fast, light, and pluggable authoritative DNS daemon. BASIC CONFIGURATION The primary configuration file is the file named config in the configura- tion directory. Note that the configuration file does not have to exist for successful startup. Without a configuration file, gdnsd will load all of the zones in the zones directory (default "/usr/local/etc/gdnsd/zones/") and listen on port 53 of 0.0.0.0 and "::" using default settings. COMMANDLINE OPTION FLAGS -c Set the configuration directory, defaults to /usr/local/etc/gdnsd. The zones directory is the zones/ subdirectory of the configuration direc- tory. -D Enables additional debug-level log output as appropriate. -l Sends log output to syslog rather than the default stderr. This is im- plicitly turned on by the "daemonize" action, and is recommended when running as a systemd service as well, to capture priority information. -S Forces the "zones_strict_data" configuration option to true for this invocation, regardless of the setting in the config file. This is mostly useful for validation during the "checkconf" option. -R Replace mode for "start" and "daemonize": Normally, if another server instance has the server control socket locked, a "start" or "daemonize" attempt will fail. With this flag set, the new server will connect to the old over its control socket and attempt a downtime-less, graceful takeover of operations. This allows for both code and configuration changes to happen without losing re- quests in most cases and is in general fairly seamless. See the gdnsd- ctl(8) documentation for "replace" for more information, as that is the preferred interface to this functionality. -i Idempotent mode for "start" and "daemonize": Normally, if another server instance has the server control socket locked, a "start" or "daemonize" attempt will fail. With this flag set, if another instance is already running, this instance will report success and exit with status zero immediately. ACTIONS checkconf Checks the validity of the configuration file and zonefiles, setting the exit status appropriately (0 for success). The same code executes implicitly during startup; checkconf just exits at the last point be- fore real runtime actions need to be taken, such as acquiring sockets. start Starts gdnsd as a runtime DNS server foreground process, emitting log output to stderr. daemonize Starts gdnsd as a detached background daemonize process in a new ses- sion, parented to PID 1 (init), emitting log output to directly to sys- log. The initial foreground process will emit no terminal output on success, but will wait for the background daemon to complete startup operations successfully before exiting with status zero (or not, in which case it will exit non-zero and emit some kind of failure output to either stderr or syslog). Any other commandline option will be treated as invalid, which will result in displaying a short help text to STDERR and exiting with a non-zero exit status. This includes things like the ubiquitous --help and --version. PRIVILEGES This service pays no attention to, nor does it attempt to check or modify, anything about the runtime security environment or privilege set, or whether or not it happens to be running as "root", or attempt any actions that would commonly require "root" privileges, such as altering its own memlock rlimits or raising its own process priority. The lone exception is that the code blindly assumes that binding its DNS listening ports, which default to being in the privileged range, will Just Work. It expects all such things to be managed managed by external mechanisms: either a systemd-like init system which can do it all declaratively, or a combination of tooling in an initscript for a traditional init system to take care of the necessary privileged settings and/or security-jailing / ACLs, etc, SYSTEMD COMPATIBILITY When run as a systemd service, "start" should be used rather than "daemo- nize", the "-l" flag should be used, and the type should be set to "Type=notify" with "NotifyAccess=all". The latter bits will cause systemd to set $NOTIFY_SOCKET for the daemon, and the daemon in turn will use this to send a readiness notification when it's done with initial startup tasks and ready to service requests. "gdnsdctl -l stop" should be used for the "ExecStop=" command. The source tree contains an example systemd unit file with reasonable de- faults for a production deployment. ZONE FILES - RFC1035 The directory for standard RFC1035 zone files (the default zone data back- end) is the subdirectory named zones/ in the configuration directory, so the default would be /usr/local/etc/gdnsd/zones/. RFC1035 zone files are the traditional zone file format that one typically uses with e.g. BIND. For more information on the internal format and pro- cessing of these files, see gdnsd.zonefile(5). This section is about how the directory itself is managed. All files in the zones directory are considered zone files. In general there should be exactly one file per zone, and the filename should match the zone name. Filenames beginning with "." are ignored. All zone file must be regular files (as opposed to directories, symlinks, sockets, etc). In order to better support the special case of RFC 2137 -style classless in-addr.arpa delegation zones (which contain forward slashes), any "@" sym- bol in the filename will be translated to a forward slash ("/") when trans- forming a filename into its corresponding zone name. For similar reasons, if your server is intended to serve the root of the DNS, the filename for the root zone should be the special filename ROOT_ZONE, rather than the impossible literal filename .. Because authori- tative servers cannot serve two domains which have a parent<->child rela- tionship correctly, a root server cannot serve any other zone, so this would be the sole zonefile. The standard DNS zone file escape sequences are recognized within the file- names (e.g. "\." for a dot within a label, or "\NNN" where NNN is a decimal integer in the range 0 - 255), if for some reason you need a strange char- acter in your zone name. Trailing dots on zonefile names are ignored; e.g. example.com and exam- ple.com. are functionally equivalent. Duplicate zones (e.g. having both of the above representations of "exam- ple.com" present in the zones directory, and/or adding a different case-mapping such as EXample.Com) are illegal. Subzones (e.g. having zonefiles for both "example.com" and "subz.exam- ple.com") are also illegal. ZONE FILES - RELOADING "gdnsdctl reload-zones" triggers re-loading all zone data. The reload op- eration is done in a separate thread from the main server and doesn't in- terrupt DNS request flow. "gdnsdctl" will wait for the server to complete the load operation and re- port back the success or failure of the reload transaction via stdout and its process exit status. If any failure occurs during the reload operation, the entire reload trans- action is discarded with no effect on the previous runtime data still in use to answer ongoing queries. DIRECTORIES Important directory paths for the core daemon code: /usr/local/etc/gdnsd Default configuration directory, unless overridden via "-c". The pri- mary configuration file is always the file config in the configuration directory. /var/run/gdnsd Default run_dir. This is where the daemon's control socket and lock files are created. See the entry for "run_dir" in the gdnsd.config(5) manpage for more information about this directory. /var/db/gdnsd Default state_dir. The admin_state file is read from this directory for administrative state-overrides on monitored resources, see below in the FILES section. See the entry for "state_dir" in the gdnsd.con- fig(5) manpage for more information about this directory. /usr/local/libexec/gdnsd This is the default path for daemon-private executables that users should not run. The only current case is gdnsd_extmon_helper for the extmon plugin and the path for this can be overridden in that plugin's configuration, documented in gdnsd-plugin-extmon(8). ADMIN STATE FILE - /var/db/gdnsd/admin_state This file is the input for administrative state overrides affecting plugin resolution decisions. The intent of this file is to allow explicit, human administrative decisions to temporarily override the states affecting plu- gin decision-making on issues of failover and/or geographic distribution. A non-existent file is treated the same as an empty file. The file is watched at runtime for changes, and any overridden state found is applied quickly. The file is expected to persist reboots and daemon restarts in order to preserve the administrator's intent through these events. A basic understanding of how both monitoring and resolution plugins in gdnsd work is assumed (see gdnsd.config(5)). This file is parsed as a vscf hash data structure (again, see gdnsd.config(5) for deeper details of that format). The keys are the names of monitored or virtual resources, and the values are forced state values (optionally with monitored-TTL values as well). Keys can also be wildcards using the shell glob syntax which affect multiple resources. For normal monitored resources, the typical form of a key would be "THING/service_type", where "THING" is the monitored address or CNAME value and "service_type" is the service_type configured to monitor that address or CNAME value by one or more resolver plugins. The value portion takes the form of "STATE[/TTL]", where "STATE" is "UP" or "DOWN" and the TTL por- tion is an optional override of the monitored TTL. The order of the lines in the file is important; they are processed and ap- plied in-order such that later lines can override the actions of earlier lines. This is especially handy for making exceptions to glob-matches. Example: /var/db/gdnsd/admin_state: 2001:db8::2:123/my_http_check => DOWN # down a specific res+stype foo.example.com./extmon_ping => UP # up a specific res+stype 192.0.2.1/* => DOWN # down all service_types for this address */xmpp => UP/30 # up all resources monitored by xmpp w/ TTL 30 ... 192.0.2.2/xmpp => DOWN # ... except this one Some resolution plugins can also register virtual resources (which are not monitored by any "service_type") solely for the purpose of administrative override of decision-making. Currently the geoip and metafo plugins do this for their "datacenters", and the keys they create take the form of "plugin_name/resname/dcname" to force a datacenter's state at the per-re- source level. The geoip plugin also supports keys of the form "plu- gin_name/mapname/dcname" to force a datacenter's state at the per-map level. These forcings override the aggregate state passed up to geoip/metafo from per-datacenter plugins (e.g. multifo or weighted monitor- ing several addresses in a datacenter), and in the geoip case the more-spe- cific per-resource forced state will override any per-map forced state. Example: /var/db/gdnsd/admin_state: geoip/map3/dc-us => DOWN # down dc-us in geoip map3 */dc-jp => DOWN # down all datacenters named dc-jp for geoip and metafo metafo/res_www/dc-jp => UP # exception to above All of the available monitored and virtual keys that can be matched in this file, as well as their current monitored and/or forced states, are visible in the output of "gdnsdctl states" in JSON format. SIGNALS Any signal not explicitly mentioned is not explicitly handled. That is to say, they will have their default actions, which often include aborting ex- ecution. SIGTERM, SIGINT Causes the daemon to exit gracefully with accompanying log output. The exit status will reflect the terminating signal appropriately. SIGPIPE Ignored. SIGHUP If started via "daemonize", "SIGHUP" is explicitly ignored by the back- ground daemon, but not by the temporary foreground process during ini- tialization. When started via "start", "SIGHUP" handling is left at defaults, which will normally result in unclean process termination on reception. SIGUSR1 This signal is "handled" by the main daemon for compatibility reasons, as previous versions used it to request asynchronous zone data reloads. It merely logs an error now which notes the new "gdnsdctl" mechanism, and has no real effect. This compatibility handling may be removed in a future major version update. SIGUSR2 Used internally as an inter-thread signal, no documented use from the outside. Do not send this signal to any thread of the daemon. EXIT STATUS An exit status of zero indicates success, anything else indicates failure. For "daemonize", the exit status of the initial foreground process will in- dicate whether the background daemon launched successfully. For "start", the initial foreground process is the daemon, and exit status will reflect the terminating signal appropriately even in a clean shutdown case, or be zero if cleanly shut down by non-signal mechanisms. SEE ALSO gdnsd.config(5), gdnsd.zonefile(5) The gdnsd manual. COPYRIGHT AND LICENSE Copyright (c) 2012 Brandon L Black <blblack@gmail.com> This file is part of gdnsd. gdnsd is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. gdnsd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more de- tails. You should have received a copy of the GNU General Public License along with gdnsd. If not, see <http://www.gnu.org/licenses/>. gdnsd 3.8.0 2026-08-01 GDNSD(8)
NAME | SYNOPSIS | DESCRIPTION | BASIC CONFIGURATION | COMMANDLINE OPTION FLAGS | ACTIONS | PRIVILEGES | SYSTEMD COMPATIBILITY | ZONE FILES - RFC1035 | ZONE FILES - RELOADING | DIRECTORIES | SIGNALS | EXIT STATUS | SEE ALSO | COPYRIGHT AND LICENSE
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gdnsd&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>