Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
GIT-HELP(1)			  Git Manual			   GIT-HELP(1)

NAME
       git-help	- Display help information about Git

SYNOPSIS
       git help	[-a|--all] [--[no-]verbose] [--[no-]external-commands] [--[no-]aliases]
       git help	[[-i|--info] [-m|--man]	[-w|--web]] [<command>|<doc>]
       git help	[-g|--guides]
       git help	[-c|--config]
       git help	[--user-interfaces]
       git help	[--developer-interfaces]

DESCRIPTION
       With no options and no <command>	or <doc> given,	the synopsis of	the
       git command and a list of the most commonly used	Git commands are
       printed on the standard output.

       If the option --all or -a is given, all available commands are printed
       on the standard output.

       If the option --guides or -g is given, a	list of	the Git	concept	guides
       is also printed on the standard output.

       If a command or other documentation is given, the relevant manual page
       will be brought up. The man program is used by default for this
       purpose,	but this can be	overridden by other options or configuration
       variables.

       If an alias is given, git shows the definition of the alias on standard
       output. To get the manual page for the aliased command, use git
       <command> --help.

       Note that git --help ...	is identical to	git help ... because the
       former is internally converted into the latter.

       To display the git(1) man page, use git help git.

       This page can be	displayed with git help	help or	git help --help.

OPTIONS
       -a, --all
	   Print all the available commands on the standard output.

       --no-external-commands
	   When	used with --all, exclude the listing of	external "git-*"
	   commands found in the $PATH.

       --no-aliases
	   When	used with --all, exclude the listing of	configured aliases.

       --verbose
	   When	used with --all, print description for all recognized
	   commands. This is the default.

       -c, --config
	   List	all available configuration variables. This is a short summary
	   of the list in git-config(1).

       -g, --guides
	   Print a list	of the Git concept guides on the standard output.

       --user-interfaces
	   Print a list	of the repository, command and file interfaces
	   documentation on the	standard output.

	   In-repository file interfaces such as .git/info/exclude are
	   documented here (see	gitrepository-layout(5)), as well as in-tree
	   configuration such as .mailmap (see gitmailmap(5)).

	   This	section	of the documentation also covers general or widespread
	   user-interface conventions (e.g.  gitcli(7)), and
	   pseudo-configuration	such as	the file-based .git/hooks/* interface
	   described in	githooks(5).

       --developer-interfaces
	   Print a list	of file	formats, protocols and other developer
	   interfaces documentation on the standard output.

       -i, --info
	   Display manual page for the command in the info format. The info
	   program will	be used	for that purpose.

       -m, --man
	   Display manual page for the command in the man format. This option
	   may be used to override a value set in the help.format
	   configuration variable.

	   By default the man program will be used to display the manual page,
	   but the man.viewer configuration variable may be used to choose
	   other display programs (see below).

       -w, --web
	   Display manual page for the command in the web (HTML) format. A web
	   browser will	be used	for that purpose.

	   The web browser can be specified using the configuration variable
	   help.browser, or web.browser	if the former is not set. If neither
	   of these config variables is	set, the git web--browse helper	script
	   (called by git help)	will pick a suitable default. See git-
	   web--browse(1) for more information about this.

CONFIGURATION VARIABLES
   help.format
       If no command-line option is passed, the	help.format configuration
       variable	will be	checked. The following values are supported for	this
       variable; they make git help behave as their corresponding command-
       line option:

          "man" corresponds to	-m|--man,

          "info" corresponds to -i|--info,

          "web" or "html" correspond to -w|--web.

   help.browser, web.browser, and browser.<tool>.path
       The help.browser, web.browser and browser.<tool>.path will also be
       checked if the web format is chosen (either by command-line option or
       configuration variable).	See -w|--web in	the OPTIONS section above and
       git-web--browse(1).

   man.viewer
       The man.viewer configuration variable will be checked if	the man	format
       is chosen. The following	values are currently supported:

          "man": use the man program as usual,

          "woman": use	emacsclient to launch the "woman" mode in emacs	(this
	   only	works starting with emacsclient	versions 22),

          "konqueror":	use kfmclient to open the man page in a	new konqueror
	   tab (see Note about konqueror below).

       Values for other	tools can be used if there is a	corresponding
       man.<tool>.cmd configuration entry (see below).

       Multiple	values may be given to the man.viewer configuration variable.
       Their corresponding programs will be tried in the order listed in the
       configuration file.

       For example, this configuration:

		   [man]
			   viewer = konqueror
			   viewer = woman

       will try	to use konqueror first.	But this may fail (for example,	if
       DISPLAY is not set) and in that case emacs' woman mode will be tried.

       If everything fails, or if no viewer is configured, the viewer
       specified in the	GIT_MAN_VIEWER environment variable will be tried. If
       that fails too, the man program will be tried anyway.

   man.<tool>.path
       You can explicitly provide a full path to your preferred	man viewer by
       setting the configuration variable man.<tool>.path. For example,	you
       can configure the absolute path to konqueror by setting
       man.konqueror.path. Otherwise, git help assumes the tool	is available
       in PATH.

   man.<tool>.cmd
       When the	man viewer, specified by the man.viewer	configuration
       variables, is not among the supported ones, then	the corresponding
       man.<tool>.cmd configuration variable will be looked up.	If this
       variable	exists then the	specified tool will be treated as a custom
       command and a shell eval	will be	used to	run the	command	with the man
       page passed as arguments.

   Note	about konqueror
       When konqueror is specified in the man.viewer configuration variable,
       we launch kfmclient to try to open the man page on an already opened
       konqueror in a new tab if possible.

       For consistency,	we also	try such a trick if man.konqueror.path is set
       to something like A_PATH_TO/konqueror. That means we will try to	launch
       A_PATH_TO/kfmclient instead.

       If you really want to use konqueror, then you can use something like
       the following:

		   [man]
			   viewer = konq

		   [man	"konq"]
			   cmd = A_PATH_TO/konqueror

   Note	about git config --global
       Note that all these configuration variables should probably be set
       using the --global flag,	for example like this:

	   $ git config	--global help.format web
	   $ git config	--global web.browser firefox

       as they are probably more user specific than repository specific. See
       git-config(1) for more information about	this.

GIT
       Part of the git(1) suite

Git 2.49.0			  2025-03-14			   GIT-HELP(1)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=git-help&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>

home | help