FreeBSD Manual Pages
lepton-sch2pcb(1) 1.9.18.20220529 lepton-sch2pcb(1) NAME lepton-sch2pcb - Update PCB layouts from Lepton EDA schematics SYNOPSIS lepton-sch2pcb [OPTION ...] {PROJECT | FILE ...} DESCRIPTION lepton-sch2pcb is a frontend to lepton-netlist(1) which aids in creat- ing and updating pcb(1) printed circuit board layouts based on a set of electronic schematics created with lepton-schematic(1). Instead of specifying all options and input schematic FILEs on the com- mand line, lepton-sch2pcb can use a PROJECT file instead. lepton-sch2pcb first runs lepton-netlist(1) with the `PCB' backend (or backend specified by --backend-net) to create a `<name>.net' file con- taining a pcb(1) formatted netlist for the design. The second step is to run lepton-netlist(1) again with the `gsch2pcb' backend (or backend specified by --backend-pcb) to find any M4(1) ele- ments required by the schematics. Any missing elements are found by searching a set of file element directories. If no `<name>.pcb' file exists for the design yet, it is created with the required elements; otherwise, any new elements are output to a `<name>.new.pcb' file. If a `<name>.pcb' file exists, it is searched for elements with a non- empty element name with no matching schematic symbol. These elements are removed from the `<name>.pcb' file, with a backup in a `<name>.pcb.bak' file. Finally, lepton-netlist(1) is run a third time with the `pcbpins' back- end (or backend specified by --backend-cmd) to create a `<name>.cmd' file. This can be loaded into pcb(1) to rename all pin names in the PCB layout to match the schematic. OPTIONS -o, --output-name=BASENAME Use output filenames `BASENAME.net', `BASENAME.pcb', and `BASE- NAME.new.pcb'. By default, the basename of the first schematic file in the list of input files is used. -d, --elements-dir=DIRECTORY Add DIRECTORY to the list of directories to search for PCB file elements. By default, the following directories are searched if they exist: `./packages', `/usr/local/share/pcb/newlib', `/usr/share/pcb/newlib', `/usr/local/lib/pcb_lib', `/usr/lib/pcb_lib', `/usr/local/pcb_lib'. -f, --use-files Force use of file elements in preference to elements generated with M4(1). -s, --skip-m4 Disable element generation using M4(1) entirely. --m4-file FILE Use the M4(1) file FILE in addition to the default M4 files `./pcb.inc' and `~/.pcb/pcb.inc'. --m4-pcbdir DIRECTORY Set DIRECTORY as the directory where lepton-sch2pcb should look for M4(1) files installed by pcb(1). -r, --remove-unfound Don't include references to unfound elements in the generated `.pcb' files. Use if you want pcb(1) to be able to load the (incomplete) `.pcb' file. This is enabled by default. -k, --keep-unfound Keep include references to unfound elements in the generated `.pcb' files. Use if you want to hand edit or otherwise pre- process the generated `.pcb' file before running pcb(1). -p, --preserve Preserve elements in PCB files which are not found in the schematics. Since elements with an empty element name (schematic "refdes") are never deleted, this option is rarely useful. --backend-cmd BACKEND Use BACKEND to generate `<name>.cmd' file instead of the de- fault one (`pcbpins'). --backend-net BACKEND Use BACKEND to generate `<name>.net' file instead of the de- fault one (`PCB'). --backend-pcb BACKEND Use BACKEND to generate `<name>.pcb' file instead of the de- fault one (`gsch2pcb'). --gnetlist BACKEND In addition to the default backends, run lepton-netlist(1) with `-g BACKEND', with output to `<name>.BACKEND'. --gnetlist-arg ARG Pass ARG as an additional argument to lepton-netlist(1). --empty-footprint NAME If NAME is not `none', lepton-sch2pcb will not add elements for components with that name to the PCB file. Note that if the omitted components have net connections, they will still appear in the netlist and pcb(1) will warn that they are missing. --fix-elements If a schematic component's `footprint' attribute is not equal to the `Description' of the corresponding PCB element, update the `Description' instead of replacing the element. -q, --quiet Don't output information on steps to take after running lepton- sch2pcb. -v, --verbose Output extra debugging information. This option can be speci- fied twice (`-v -v') to obtain additional debugging for file elements. -h, --help Print a help message. -V, --version Print lepton-sch2pcb version information. PROJECT FILES A lepton-sch2pcb project file is a file (not ending in `.sch') contain- ing a list of schematics to process and some options. Any long-form command line option can appear in the project file with the leading `--' removed, with the exception of `--gnetlist-arg', `--fix-elements', `--verbose', and `--version'. Schematics should be listed on a line beginning with `schematics'. An example project file might look like: schematics partA.sch partB.sch output-name design ENVIRONMENT NETLISTER specifies the netlister(1) program to run. The default is `lepton-netlist'. AUTHOR Bill Wilson COPYRIGHT Copyright (C) 2012-2017 gEDA Contributors. Copyright (C) 2017-2022 Lepton Developers. License GPLv2+: GNU GPL version 2 or later. Please see the `COPYING' file included with this program for full details. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. SEE ALSO lepton-schematic(1), lepton-netlist(1), pcb(1) Lepton EDA May 29, 2022 lepton-sch2pcb(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | PROJECT FILES | ENVIRONMENT | AUTHOR | COPYRIGHT | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=lepton-sch2pcb&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>