Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
libinput-a...-down-state(1) General Commands Manuallibinput-a...-down-state(1)

NAME
       libinput-analyze-touch-down-state - analyze the touch states

SYNOPSIS
       libinput	analyze	touch-down-state [--help] [options] recording.yml

DESCRIPTION
       The  libinput  analyze touch-downte tool	analyzes a recording made with
       libinput	record and prints "down" state of each touch. This  tool  aids
       with the	detection of stuck touches.

       This  is	 a  debugging tool only, its output may	change at any time. Do
       not rely	on the output.

OPTIONS
       --help  Print help

       --use-st
	       Use the single-touch BTN_TOOL_ bits instead of the slot	state.
	       The  output  will  only	show  the "highest" finger down	at any
	       time. For examples, where two fingers are down, only the	second
	       slot will be marked as down.

OUTPUT
       An example output for a two-finger alternating sequence below.

	 6.140281 +1062ms: x | x
	 7.410377 +1257ms:   | x
	 7.420200    +9ms:   |
	11.233108 +3812ms: x | x
	11.245721   +12ms: x | x
	11.850206  +604ms:   |
	13.827740 +1977ms: x |
	13.839723   +11ms: x |
	14.704027  +864ms: x | x
	14.716691   +12ms: x | x

LIBINPUT
       Part of the libinput(1) suite

						   libinput-a...-down-state(1)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=libinput-analyze-touch-down-state&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>

home | help