FreeBSD Manual Pages
LIGHTNINGD-CONFIG(5) LIGHTNINGD-CONFIG(5) NAME lightningd-config -- Lightning daemon configuration file SYNOPSIS ~/.lightning/config DESCRIPTION When lightningd(8) starts up it usually reads a general configuration file (default: $HOME/.lightning/config) then a network-specific config- uration file (default: $HOME/.lightning/bitcoin/config). This can be changed: see --conf and --lightning-dir. Note that some configuration options, marked dynamic can be changed at runtime: see lightning-setconfig(7): by default this will write to a file called config.setconfig in the network-specific lightning direc- tory, unless there is another config file with a name ending in ".set- config". General configuration files are processed first, then network-specific ones, then command line options: later options override earlier ones except addr options and log-level with subsystems, which accumulate. include followed by a filename includes another configuration file at that point, relative to the current configuration file. All these options are mirrored as commandline arguments to light- ningd(8), so --foo becomes simply foo in the configuration file, and --foo=bar becomes foo=bar in the configuration file. Blank lines and lines beginning with # are ignored. DEBUGGING --help will show you the defaults for many options; they vary with net- work settings so you can specify --network before --help to see the de- faults for that network. The lightning-listconfigs(7) command will output a valid configuration file using the current settings. OPTIONS General options • developer This enables developer mode, allowing developer options and commands to be used. It also disabled deprecated APIs; use allow-deprecated- apis=true to re-enable them. • allow-deprecated-apis=BOOL Enable deprecated options, JSONRPC commands, fields, etc. It de- faults to true outside developer mode, but you should set it to false when testing to ensure that an upgrade won't break your con- figuration. • help Print help and exit. Not very useful inside a configuration file, but fun to put in other's config files while their computer is unat- tended. • version Print version and exit. Also useless inside a configuration file, but putting this in someone's config file may convince them to read this man page. • database-upgrade=BOOL Upgrades to Core Lightning often change the database: once this is done, downgrades are not generally possible. By default, Core Lightning will exit with an error rather than upgrade, unless this is an official released version. If you really want to upgrade to a non-release version, you can set this to true (or false to never al- low a non-reversible upgrade!). • i-promise-to-fix-broken-api-user=FEATURE Deprecated features get removed slowly (over 3 releases), but some- times people still get surprised when they are finally removed. As long as they haven't been actually fully removed, this option will re-enable it. Unless we've made a horrible mistake it's probably time to complain or fix to whatever is using the old API. It can be specified multiple times for different features. Whitespace Handling Because it's a common error, we automatically trim whitespace from the end of most configuration options. Exceptions are noted below: • log-prefix: Preserves whitespace at the end. • alias: Preserves whitespace at the end. Bitcoin control options: Bitcoin control options: • network=NETWORK Select the network parameters (bitcoin, testnet, testnet4, signet, or regtest). This is not valid within the per-network configuration file. • mainnet Alias for network=bitcoin. • regtest Alias for network=regtest (added in v23.08) • testnet Alias for network=testnet. • testnet4 Alias for network=testnet4. • signet Alias for network=signet. • bitcoin-cli=PATH [plugin bcli] The name of bitcoin-cli executable to run. • bitcoin-datadir=DIR [plugin bcli] -datadir argument to supply to bitcoin-cli(1). • bitcoin-rpcuser=USER [plugin bcli] The RPC username for talking to bitcoind(1). • bitcoin-rpcpassword=PASSWORD [plugin bcli] The RPC password for talking to bitcoind(1). • bitcoin-rpcconnect=HOST [plugin bcli] The bitcoind(1) RPC host to connect to. • bitcoin-rpcport=PORT [plugin bcli] The bitcoind(1) RPC port to connect to. • bitcoin-rpcclienttimeout=SECONDS [plugin bcli] The bitcoind(1) RPC client timeout in seconds. Default is set to 60 instead of 900 to match bitcoin-retry-timeout default. When set ex- plicitly, the higher value of it and bitcoin-retry-timeout is used. • bitcoin-retry-timeout=SECONDS [plugin bcli] Number of seconds to keep trying a bitcoin-cli(1) command. If the command keeps failing after this time, exit with a fatal error. • rescan=BLOCKS Number of blocks to rescan from the current head, or absolute block- height if negative. This is only needed if something goes badly wrong. Lightning daemon options • lightning-dir=DIR Sets the working directory. All files (except --conf and --light- ning-dir on the command line) are relative to this. This is only valid on the command-line, or in a configuration file specified by --conf. • subdaemon=SUBDAEMON:PATH Specifies an alternate subdaemon binary. Current subdaemons are channeld, closingd, connectd, gossipd, hsmd, onchaind, and openingd. If the supplied path is relative the subdaemon binary is found in the working directory. This option may be specified multiple times. So, subdaemon=hsmd:remote_signer would use a hypothetical remote signing proxy instead of the standard lightning_hsmd binary. • pid-file=PATH Specify pid file to write to. • log-level=LEVEL[:SUBSYSTEM][:PATH] What log level to print out: options are io, trace, debug, info, un- usual, broken. If SUBSYSTEM is supplied, this sets the logging level for any subsystem (or nodeid) containing that string. If PATH is supplied, it means this log-level filter is only applied to that log-file, which is useful for creating logs to capture a specific subsystem. This option may be specified multiple times. Subsystems include: • lightningd: The main lightning daemon • database: The database subsystem • wallet: The wallet subsystem • gossipd: The gossip daemon • plugin-manager: The plugin subsystem • plugin-P: Each plugin, P = plugin path without directory • hsmd: The secret-holding daemon • connectd: The network connection daemon • jsonrpc#FD: Each JSONRPC connection, FD = file descriptor number The following subsystems exist for each channel, where N is an in- crementing internal integer id assigned for the lifetime of the channel: • openingd-chan#N: Each opening / idling daemon • channeld-chan#N: Each channel management daemon • closingd-chan#N: Each closing negotiation daemon • onchaind-chan#N: Each onchain close handling daemon So, log-level=debug:plugin would set debug level logging on all plu- gins and the plugin manager. log-level=io:chan#55 would set IO log- ging on channel number 55 (or 550, for that matter). log-level=de- bug:024b9a1fa8:/tmp/024b9a1fa8.debug.log would set debug logging for that channel only on the log-file=/tmp/024b9a1fa8.debug.log (or any node id containing that string). • log-prefix=PREFIX Prefix for all log lines: this can be customized if you want to merge logs with multiple daemons. Usually you want to include a space at the end of PREFIX, as the timestamp follows immediately. • log-file=PATH Log to this file (instead of stdout). If you specify this more than once you'll get more than one log file: - is used to mean stdout. Sending lightningd(8) SIGHUP will cause it to reopen each file (use- ful for log rotation). • log-timestamps=BOOL Set this to false to turn off timestamp prefixes (they will still appear in crash log files). • rpc-file=PATH Set JSON-RPC socket (or /dev/tty), such as for $ lightning-cli(1). • rpc-file-mode=MODE Set JSON-RPC socket file mode, as a 4-digit octal number. Default is 0600, meaning only the user that launched lightningd can command it. Set to 0660 to allow users with the same group to access the RPC as well. • daemon Run in the background, suppress stdout and stderr. Note that you need to specify log-file for this case. • conf=PATH Sets configuration file, and disable reading the normal general and network ones. If this is a relative path, it is relative to the starting directory, not lightning-dir (unlike other paths). PATH must exist and be readable (we allow missing files in the default case). Using this inside a configuration file is invalid. • wallet=DSN Identify the location of the wallet. This is a fully qualified data source name, including a scheme such as sqlite3 or postgres followed by the connection parameters. The default wallet corresponds to the following DSN: --wal- let=sqlite3://$HOME/.lightning/bitcoin/lightningd.sqlite31 For the sqlite3 scheme, you can specify a single backup database file by separating it with a : character, like so: --wal- let=sqlite3://$HOME/.lightning/bitcoin/light- ningd.sqlite3:/backup/lightningd.sqlite3 The following is an example of a postgresql wallet DSN: --wallet=postgres://user:pass@localhost:5432/db_name This will connect to a DB server running on localhost port 5432, au- thenticate with username user and password pass, and then use the database db_name. The database must exist, but the schema will be managed automatically by lightningd. • bookkeeper-dir=DIR [plugin bookkeeper] Directory to keep the accounts.sqlite3 database file in. Defaults to lightning-dir. • bookkeeper-db=DSN [plugin bookkeeper] Identify the location of the bookkeeper data. This is a fully quali- fied data source name, including a scheme such as sqlite3 or post- gres followed by the connection parameters. Defaults to sqlite3://accounts.sqlite3 in the bookkeeper-dir. • encrypted-hsm If set, you will be prompted to enter a password used to encrypt the hsm_secret. Note that once you encrypt the hsm_secret this option will be mandatory for lightningd to start. If there is no hsm_se- cret yet, lightningd will create a new encrypted secret. If you have an unencrypted hsm_secret you want to encrypt on-disk, or vice versa, see lightning-hsmtool(8). • grpc-host=HOST [plugin cln-grpc] Defines the GRPC server host. Default is 127.0.0.1. • grpc-port=portnum [plugin cln-grpc] The port number for the GRPC plugin to listen for incoming connec- tions. Default is 9736. • grpc-msg-buffer-size=number [plugin cln-grpc] The size of the buffer used by the GRPC-plugin. This buffer stores notifications between receiving them from lightningd and forwarding them over grpc. If buffer overflow occurs some notifications will not be delivered. Lightning node customization options • recover=hsmsecret Restore the node from a 32-byte secret encoded as either a codex32 secret string or a 64-character hex string: this will fail if the hsm_secret file exists. Your node will start the node in offline mode, for manual recovery. The secret can be extracted from the hsm_secret using hsmtool(8). • alias=NAME Up to 32 bytes of UTF-8 characters to tag your node. Completely silly, since anyone can call their node anything they want. The de- fault is an NSA-style codename derived from your public key, but "Peter Todd" and "VAULTERO" are good options, too. • rgb=RRGGBB Your favorite color as a hex code. • fee-base=MILLISATOSHI Default: 1000. The base fee to charge for every payment which passes through. Note that millisatoshis are a very, very small unit! Chang- ing this value will only affect new channels and not existing ones. If you want to change fees for existing channels, use the RPC call lightning-setchannel(7). • fee-per-satoshi=MILLIONTHS Default: 10 (0.001%). This is the proportional fee to charge for every payment which passes through. As percentages are too coarse, it's in millionths, so 10000 is 1%, 1000 is 0.1%. Changing this value will only affect new channels and not existing ones. If you want to change fees for existing channels, use the RPC call light- ning-setchannel(7). • min-capacity-sat=SATOSHI [dynamic] Default: 10000. This value defines the minimal effective channel ca- pacity in satoshi to accept for channel opening requests. This will reject any opening of a channel which can't pass an HTLC of least this value. Usually this prevents a peer opening a tiny channel, but it can also prevent a channel you open with a reasonable amount and the peer requesting such a large reserve that the capacity of the channel falls below this. • ignore-fee-limits=BOOL Allow nodes which establish channels to us to set any fee they want. This may result in a channel which cannot be closed, should fees in- crease, but make channels far more reliable since we never close it due to unreasonable fees. Note that this can be set on a per-chan- nel basis with lightning-setchannel(7). • commit-time=MILLISECONDS How long to wait before sending commitment messages to the peer: in theory increasing this would reduce load, but your node would have to be extremely busy node for you to even notice. • force-feerates==VALUES Networks like regtest and testnet have unreliable fee estimates: we usually treat them as the minimum (253 sats/kw) if we can't get them. This allows override of one or more of our standard feerates (see lightning-feerates(7)). Up to 5 values, separated by '/' can be provided: if fewer are provided, then the final value is used for the remainder. The values are in per-kw (roughly 1/4 of bitcoind's per-kb values), and the order is "opening", "mutual_close", "unilat- eral_close", "delayed_to_us", "htlc_resolution", and "penalty". You would usually put this option in the per-chain config file, to avoid setting it on Bitcoin mainnet! e.g. ~rusty/.light- ning/regtest/config. • htlc-minimum-msat=MILLISATOSHI Default: 0. Sets the minimal allowed HTLC value for newly created channels. If you want to change the htlc_minimum_msat for existing channels, use the RPC call lightning-setchannel(7). • htlc-maximum-msat=MILLISATOSHI Default: unset (no limit). Sets the maximum allowed HTLC value for newly created channels. If you want to change the htlc_maximum_msat for existing channels, use the RPC call lightning-setchannel(7). • announce-addr-discovered=BOOL Explicitly control the usage of discovered public IPs in node_an- nouncement updates. Default: 'auto' - Only if we don't have any- thing else to announce. Note: You also need to open TCP port 9735 on your router towards your node. Note: Will always be disabled if you use 'always-use-proxy'. • announce-addr-discovered-port=PORT Sets the public TCP port to use for announcing dynamically discovered IPs. If unset, this defaults to the selected networks lightning port, which is 9735 on mainnet. Lightning channel and HTLC options • large-channels (deprecated in v23.11) As of v23.11, this is the default (and thus, the option is ignored). Previously if you didn't specify this, channel sizes were limited to 16777215 satoshi. Note: this option is spelled large-channels but it's pronounced wumbo. • watchtime-blocks=BLOCKS How long we need to spot an outdated close attempt: on opening a channel we tell our peer that this is how long they'll have to wait if they perform a unilateral close. • (deprecated in v23.05) max-locktime-blocks=BLOCKS The longest our funds can be delayed (ie. the longest watchtime- blocks our peer can ask for, and also the longest HTLC timeout we will accept). If our peer asks for longer, we'll refuse to create a channel, and if an HTLC asks for longer, we'll refuse it. • funding-confirms=BLOCKS Confirmations required for the funding transaction when the other side opens a channel before the channel is usable. • commit-fee=PERCENT The percentage of estimatesmartfee 2/CONSERVATIVE to use for the commitment transactions: default is 100. • commit-feerate-offset=INTEGER The additional feerate a channel opener adds to their preferred feerate to lessen the odds of a disconnect due to feerate disagree- ment (default 5). • max-concurrent-htlcs=INTEGER Number of HTLCs one channel can handle concurrently in each direc- tion. Should be between 1 and 483 (default 30). • max-dust-htlc-exposure-msat=MILLISATOSHI Option which limits the total amount of sats to be allowed as dust on a channel. • cltv-delta=BLOCKS The number of blocks between incoming payments and outgoing pay- ments: this needs to be enough to make sure that if we have to, we can close the outgoing payment before the incoming, or redeem the incoming once the outgoing is redeemed. • cltv-final=BLOCKS The number of blocks to allow for payments we receive: if we have to, we might need to redeem this on-chain, so this is the number of blocks we have to do that. • accept-htlc-tlv-type=types Normally HTLC onions which contain unknown even fields are rejected. This option specifies that this type is to be accepted, and ignored. Can be specified multuple times. (Added in v23.08). • min-emergency-msat=msat This is the amount of funds to keep in the wallet to close anchor channels (which don't carry their own transaction fees). It de- faults to 25000sat, and is only maintained if there are any anchor channels (or, when opening an anchor channel). This amount may be insufficient for multiple closes at once, however. Cleanup control options: • autoclean-cycle=SECONDS [plugin autoclean, dynamic] Perform search for things to clean every SECONDS seconds (default 3600, or 1 hour, which is usually sufficient). • autoclean-succeededforwards-age=SECONDS [plugin autoclean, dynamic] How old successful forwards (settled in listforwards status) have to be before deletion (default 0, meaning never). • autoclean-failedforwards-age=SECONDS [plugin autoclean, dynamic] How old failed forwards (failed or local_failed in listforwards sta- tus) have to be before deletion (default 0, meaning never). • autoclean-succeededpays-age=SECONDS [plugin autoclean, dynamic] How old successful payments (complete in listpays status) have to be before deletion (default 0, meaning never). • autoclean-failedpays-age=SECONDS [plugin autoclean, dynamic] How old failed payment attempts (failed in listpays status) have to be before deletion (default 0, meaning never). • autoclean-paidinvoices-age=SECONDS [plugin autoclean, dynamic] How old invoices which were paid (paid in listinvoices status) have to be before deletion (default 0, meaning never). • autoclean-expiredinvoices-age=SECONDS [plugin autoclean, dynamic] How old invoices which were not paid (and cannot be) (expired in listinvoices status) before deletion (default 0, meaning never). Note: prior to v22.11, forwards for channels which were closed were not easily distinguishable. As a result, autoclean may delete more than one of these at once, and then suffer failures when it fails to delete the others. Payment and invoice control options: • disable-mpp [plugin pay] Disable the multi-part payment sending support in the pay plugin. By default the MPP support is enabled, but it can be desirable to dis- able in situations in which each payment should result in a single HTLC being forwarded in the network. • invoices-onchain-fallback Add a (taproot) fallback address to invoices produced by the invoice command, so they invoices can also be paid onchain. • xpay-handle-pay=BOOL [plugin xpay, dynamic] Setting this makes xpay intercept simply pay commands (default false). • xpay-slow-mode=BOOL [plugin xpay, dynamic] Setting this makes xpay wait until all parts have failed/succeeded before returning. Usually this is unnecessary, as xpay will return on the first success (we have the preimage, if they don't take all the parts that's their problem) or failure (the destination could succeed another part, but it would mean it was only partially paid). The default is false. Networking options Note that for simple setups, the implicit autolisten option does the right thing: for the mainnet (bitcoin) network it will try to bind to port 9735 on IPv4 and IPv6, and will announce it to peers if it seems like a public address (and other default ports for other networks, as described below). Core Lightning also support IPv4/6 address discovery behind NAT routers. If your node detects an new public address, it will update its announcement. For this to work you need to forward the default TCP port 9735 to your node. IP discovery is only active if no other ad- dresses are announced. You can instead use addr to override this (eg. to change the port), or precisely control where to bind and what to announce with the bind-addr and announce-addr options. These will disable the autolisten logic, so you must specify exactly what you want! • addr=[IPADDRESS[:PORT]]|autotor:TORIPADDRESS[:SERVICEPORT][/tor- port=TORPORT]|statictor:TORIPADDRESS[:SERVICEPORT][/torport=TOR- PORT][/torblob=[blob]]|HOSTNAME[:PORT] Set an IP address (v4 or v6) or automatic Tor address to listen on and (maybe) announce as our node address. An empty 'IPADDRESS' is a special value meaning bind to IPv4 and/or IPv6 on all interfaces, '0.0.0.0' means bind to all IPv4 interfaces, '::' means 'bind to all IPv6 interfaces' (if you want to specify an IPv6 address and a port, use [] around the IPv6 address, like [::]:9750). If 'PORT' is not specified, the default port 9735 is used for mainnet (testnet: 19735, signet: 39735, regtest: 19846, testnet4: 49735). If we can determine a public IP address from the resulting binding, the address is announced. If the argument begins with 'autotor:' then it is followed by the IPv4 or IPv6 address of the Tor control port (default port 9051), and this will be used to configure a Tor hidden service for port 9735 in case of mainnet (bitcoin) network whereas other networks (testnet, testnet4, signet, regtest) will set the same default ports they use for non-Tor addresses (see above). The Tor hidden service will be configured to point to the first IPv4 or IPv6 address we bind to and is by default unique to your node's id. If the argument begins with 'statictor:' then it is followed by the IPv4 or IPv6 address of the Tor control port (default port 9051), and this will be used to configure a static Tor hidden service. You can add the text '/torblob=BLOB' followed by up to 64 Bytes of text to generate from this text a v3 onion service address text unique to the first 32 Byte of this text. You can also use an postfix '/tor- port=TORPORT' to select the external tor binding. The result is that over tor your node is accessible by a port defined by you and possi- bly different from your local node port assignment. This option can be used multiple times to add more addresses, and its use disables autolisten. If necessary, and 'always-use-proxy' is not specified, a DNS lookup may be done to resolve HOSTNAME or TORIPADDRESS'. If HOSTNAME was given that resolves to a local interface, the daemon will bind to that interface. • bind-addr=[IPADDRESS[:PORT]]|SOCKETPATH|HOSTNAME[:PORT] Set an IP address or UNIX domain socket to listen to, but do not an- nounce. A UNIX domain socket is distinguished from an IP address by beginning with a /. An empty 'IPADDRESS' is a special value meaning bind to IPv4 and/or IPv6 on all interfaces, '0.0.0.0' means bind to all IPv4 interfaces, '::' means 'bind to all IPv6 interfaces'. 'PORT' is not specified, 9735 is used. This option can be used multiple times to add more addresses, and its use disables autolisten. If necessary, and 'always-use-proxy' is not specified, a DNS lookup may be done to resolve 'IPADDRESS'. If a HOSTNAME was given and always-use-proxy is not specified, a DNS lookup may be done to resolve it and bind to a local interface (if found). • announce-addr=IPADDRESS[:PORT]|TORADDRESS.onion[:PORT]|dns:HOST- NAME[:PORT] Set an IP (v4 or v6) address or Tor address to announce; a Tor ad- dress is distinguished by ending in .onion. PORT defaults to 9735. Empty or wildcard IPv4 and IPv6 addresses don't make sense here. Also, unlike the 'addr' option, there is no checking that your an- nounced addresses are public (e.g. not localhost). This option can be used multiple times to add more addresses, and its use disables autolisten. Since v23.058, the dns: prefix can be used to indicate that this hostname and port should be announced as a DNS hostname entry. Please note that most mainnet nodes do not yet use, read or propa- gate this information correctly. • announce-addr-dns=BOOL (deprecated in v23.08) When set to true (default is false), prefixes all HOSTNAME in an- nounce-addr with dns:. • offline Do not bind to any ports, and do not try to reconnect to any peers. This can be useful for maintenance and forensics, so is usually specified on the command line. Overrides all addr and bind-addr op- tions. • autoconnect-seeker-peers=NUMBER (added in v24.11) Sets the number of peers to gossip with: if we don't have this many connections, we will try to connect to random peers until we do. The default is 10. • autolisten=BOOL By default, we bind (and maybe announce) on IPv4 and IPv6 interfaces if no addr, bind-addr or announce-addr options are specified. Set- ting this to false disables that. • proxy=IPADDRESS[:PORT] Set a socks proxy to use to connect to Tor nodes (or for all connec- tions if always-use-proxy is set). The port defaults to 9050 if not specified. • always-use-proxy=BOOL Always use the proxy, even to connect to normal IP addresses (you can still connect to Unix domain sockets manually). This also dis- ables all DNS lookups, to avoid leaking information. • disable-dns Disable the DNS bootstrapping mechanism to find a node by its node ID. • tor-service-password=PASSWORD Set a Tor control password, which may be needed for autotor: to au- thenticate to the Tor control port. • clnrest-port=PORT [plugin clnrest] Sets the REST server port to listen to (3010 is common). If this is not specified, the clnrest plugin will be disabled. • clnrest-protocol=PROTOCOL [plugin clnrest] Specifies the REST server protocol. Default is HTTPS. • clnrest-host=HOST [plugin clnrest] Defines the REST server host. Default is 127.0.0.1. • clnrest-certs=PATH [plugin clnrest] Defines the path for HTTPS cert & key. Default path is same as RPC file path to utilize gRPC's client certificate. If it is missing at the configured location, new identity (client.pem and client- key.pem) will be generated. • clnrest-cors-origins=CORSORIGINS [plugin clnrest] Define multiple origins which are allowed to share resources on web pages to a domain different from the one that served the web page. Default is * which allows all origins. • clnrest-csp=CSPOLICY [plugin clnrest] Creates a whitelist of trusted content sources that can run on a webpage and helps mitigate the risk of attacks. Default CSP is de- fault-src 'self'; font-src 'self'; img-src 'self' data:; frame-src 'self'; style-src 'self' 'unsafe-inline'; script-src 'self' 'unsafe- inline';. • clnrest-swagger-root=URL [plugin clnrest] Root url for Swagger UI. Default is /. • wss-bind-addr=[IPADDRESS[:PORT]]|SOCKETPATH|HOSTNAME[:PORT] [plugin wss-proxy.py] Sets the WSS address. • wss-certs=PATH [plugin wss-proxy.py] Defines the path for WSS cert & key. Default path is same as RPC file path to utilize gRPC/clnrest's client certificate. If it is missing at the configured location, new identity (client.pem and client-key.pem) will be generated. • exposesecret-passphrase=passphrase [plugin exposesecret] Defines a passphrase which will let users extract the hsm_secret us- ing the exposesecret command. If this is not set, the exposesecret command always fails. Lightning Plugins lightningd(8) supports plugins, which offer additional configuration options and JSON-RPC methods, depending on the plugin. Some are sup- plied by default (usually located in libexec/c-lightning/plugins/). If a plugins directory exists under lightning-dir that is searched for plugins along with any immediate subdirectories). You can specify addi- tional paths too: • plugin=PATH Specify a plugin to run as part of Core Lightning. This can be spec- ified multiple times to add multiple plugins. Note that unless plu- gins themselves specify ordering requirements for being called on various hooks, plugins will be ordered by commandline, then config file. • plugin-dir=DIRECTORY Specify a directory to look for plugins; all executable files not containing punctuation (other than ., - or _) in 'DIRECTORY are loaded. DIRECTORY must exist; this can be specified multiple times to add multiple directories. The ordering of plugins within a di- rectory is currently unspecified. • clear-plugins This option clears all plugin, important-plugin, and plugin-dir op- tions preceding it, including the default built-in plugin directory. You can still add plugin-dir, plugin, and important-plugin options following this and they will have the normal effect. • disable-plugin=PLUGIN If PLUGIN contains a /, plugins with the same path as PLUGIN will not be loaded at startup. Otherwise, no plugin with that base name will be loaded at startup, whatever directory it is in. This option is useful for disabling a single plugin inside a directory. You can still explicitly load plugins which have been disabled, using light- ning-plugin(7) start. • important-plugin=PLUGIN Speciy a plugin to run as part of Core Lightning. This can be spec- ified multiple times to add multiple plugins. Plugins specified via this option are considered so important, that if the plugin stops for any reason (including via lightning-plugin(7) stop), Core Light- ning will also stop running. This way, you can monitor crashes of important plugins by simply monitoring if Core Lightning terminates. Built-in plugins, which are installed with lightningd(8), are auto- matically considered important. Experimental Options Experimental options are subject to breakage between releases: they are made available for advanced users who want to test proposed features. • fetchinvoice-noconnect Specifying this prevents fetchinvoice, sendinvoice and replying to invoice request from trying to connect directly to the offering node as a last resort. • experimental-shutdown-wrong-funding Specifying this allows the wrong_funding field in _shutdown: if a remote node has opened a channel but claims it used the incorrect txid (and the channel hasn't been used yet at all) this allows them to negotiate a clean shutdown with the txid they offer (#4421 <https://github.com/ElementsProject/lightning/pull/4421>). • experimental-dual-fund Specifying this enables support for the dual funding protocol (bolt <https://github.com/lightning/bolts> #851), allowing both parties to contribute funds to a channel. The decision about whether to add funds or not to a proposed channel is handled automatically by a plugin that implements the appropriate logic for your needs. The de- fault behavior is to not contribute funds. • experimental-splicing Specifying this enables support for the splicing protocol (bolt <https://github.com/lightning/bolts> #863), allowing both parties to dynamically adjust the size a channel. These changes can be built interactively using PSBT and combined with other channel actions in- cluding dual fund, additional channel splices, or generic transac- tion activity. The operations will be bundled into a single trans- action. The channel will remain active while awaiting splice confir- mation, however you can only spend the smaller of the prior channel balance and the new one. • experimental-peer-storage Specifying this option means we will store up to 64k of encrypted data for our peers, and give them our (encrypted!) backup data to store as well, based on a protocol similar to bolt <https://github.com/lightning/bolts> #881. • experimental-quiesce Specifying this option advertizes option_quiesce. Not very useful by itself, except for testing. • experimental-upgrade-protocol Specifying this option means we send (and allow receipt of) a simple protocol to update channel types. At the moment, we only support setting option_static_remotekey to ancient channels. The peer must also support this option. BUGS You should report bugs on our github issues page, and maybe submit a fix to gain our eternal gratitude! AUTHOR Rusty Russell <<rusty@rustcorp.com.au>> wrote this man page, and much of the configuration language, but many others did the hard work of ac- tually implementing these options. SEE ALSO lightning-listconfigs(7) lightning-setchannel(7) lightningd(8) light- ning-hsmtool(8) RESOURCES Main web site: <https://github.com/ElementsProject/lightning> COPYING Note: the modules in the ccan/ directory have their own licenses, but the rest of the code is covered by the BSD-style MIT license. Core Lightning v25.02 LIGHTNINGD-CONFIG(5)
NAME | SYNOPSIS | DESCRIPTION | DEBUGGING | OPTIONS | BUGS | AUTHOR | SEE ALSO | RESOURCES | COPYING
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=lightningd-config&sektion=5&manpath=FreeBSD+Ports+14.3.quarterly>