FreeBSD Manual Pages
LLVM-EXEGESIS(1) LLVM LLVM-EXEGESIS(1) NAME llvm-exegesis - LLVM Machine Instruction Benchmark SYNOPSIS llvm-exegesis [options] DESCRIPTION llvm-exegesis is a benchmarking tool that uses information available in LLVM to measure host machine instruction characteristics like latency, throughput, or port decomposition. Given an LLVM opcode name and a benchmarking mode, llvm-exegesis generates a code snippet that makes execution as serial (resp. as parallel) as possi- ble so that we can measure the latency (resp. inverse throughput/uop decom- position) of the instruction. The code snippet is jitted and executed on the host subtarget. The time taken (resp. resource usage) is measured using hardware performance counters. The result is printed out as YAML to the standard output. The main goal of this tool is to automatically (in)validate the LLVM's TableDef scheduling models. To that end, we also provide analysis of the results. llvm-exegesis can also benchmark arbitrary user-provided code snippets. EXAMPLE 1: BENCHMARKING INSTRUCTIONS Assume you have an X86-64 machine. To measure the latency of a single in- struction, run: $ llvm-exegesis -mode=latency -opcode-name=ADD64rr Measuring the uop decomposition or inverse throughput of an instruction works similarly: $ llvm-exegesis -mode=uops -opcode-name=ADD64rr $ llvm-exegesis -mode=inverse_throughput -opcode-name=ADD64rr The output is a YAML document (the default is to write to stdout, but you can redirect the output to a file using -benchmarks-file): --- key: opcode_name: ADD64rr mode: latency config: '' cpu_name: haswell llvm_triple: x86_64-unknown-linux-gnu num_repetitions: 10000 measurements: - { key: latency, value: 1.0058, debug_string: '' } error: '' info: 'explicit self cycles, selecting one aliasing configuration. Snippet: ADD64rr R8, R8, R10 ' ... To measure the latency of all instructions for the host architecture, run: $ llvm-exegesis -mode=latency -opcode-index=-1 EXAMPLE 2: BENCHMARKING A CUSTOM CODE SNIPPET To measure the latency/uops of a custom piece of code, you can specify the snippets-file option (- reads from standard input). $ echo "vzeroupper" | llvm-exegesis -mode=uops -snippets-file=- Real-life code snippets typically depend on registers or memory. llvm-exe- gesis checks the liveliness of registers (i.e. any register use has a cor- responding def or is a "live in"). If your code depends on the value of some registers, you have two options: * Mark the register as requiring a definition. llvm-exegesis will automati- cally assign a value to the register. This can be done using the direc- tive LLVM-EXEGESIS-DEFREG <reg name> <hex_value>, where <hex_value> is a bit pattern used to fill <reg_name>. If <hex_value> is smaller than the register width, it will be sign-extended. * Mark the register as a "live in". llvm-exegesis will benchmark using whatever value was in this registers on entry. This can be done using the directive LLVM-EXEGESIS-LIVEIN <reg name>. For example, the following code snippet depends on the values of XMM1 (which will be set by the tool) and the memory buffer passed in RDI (live in). # LLVM-EXEGESIS-LIVEIN RDI # LLVM-EXEGESIS-DEFREG XMM1 42 vmulps (%rdi), %xmm1, %xmm2 vhaddps %xmm2, %xmm2, %xmm3 addq $0x10, %rdi EXAMPLE 3: ANALYSIS Assuming you have a set of benchmarked instructions (either latency or uops) as YAML in file /tmp/benchmarks.yaml, you can analyze the results us- ing the following command: $ llvm-exegesis -mode=analysis \ -benchmarks-file=/tmp/benchmarks.yaml \ -analysis-clusters-output-file=/tmp/clusters.csv \ -analysis-inconsistencies-output-file=/tmp/inconsistencies.html This will group the instructions into clusters with the same performance characteristics. The clusters will be written out to /tmp/clusters.csv in the following format: cluster_id,opcode_name,config,sched_class ... 2,ADD32ri8_DB,,WriteALU,1.00 2,ADD32ri_DB,,WriteALU,1.01 2,ADD32rr,,WriteALU,1.01 2,ADD32rr_DB,,WriteALU,1.00 2,ADD32rr_REV,,WriteALU,1.00 2,ADD64i32,,WriteALU,1.01 2,ADD64ri32,,WriteALU,1.01 2,MOVSX64rr32,,BSWAP32r_BSWAP64r_MOVSX64rr32,1.00 2,VPADDQYrr,,VPADDBYrr_VPADDDYrr_VPADDQYrr_VPADDWYrr_VPSUBBYrr_VPSUBDYrr_VPSUBQYrr_VPSUBWYrr,1.02 2,VPSUBQYrr,,VPADDBYrr_VPADDDYrr_VPADDQYrr_VPADDWYrr_VPSUBBYrr_VPSUBDYrr_VPSUBQYrr_VPSUBWYrr,1.01 2,ADD64ri8,,WriteALU,1.00 2,SETBr,,WriteSETCC,1.01 ... llvm-exegesis will also analyze the clusters to point out inconsistencies in the scheduling information. The output is an html file. For example, /tmp/inconsistencies.html will contain messages like the following : [im- age] Note that the scheduling class names will be resolved only when llvm-exege- sis is compiled in debug mode, else only the class id will be shown. This does not invalidate any of the analysis results though. OPTIONS -help Print a summary of command line options. -opcode-index=<LLVM opcode index> Specify the opcode to measure, by index. Specifying -1 will result in measuring every existing opcode. See example 1 for details. Ei- ther opcode-index, opcode-name or snippets-file must be set. -opcode-name=<opcode name 1>,<opcode name 2>,... Specify the opcode to measure, by name. Several opcodes can be spec- ified as a comma-separated list. See example 1 for details. Either opcode-index, opcode-name or snippets-file must be set. -snippets-file=<filename> Specify the custom code snippet to measure. See example 2 for de- tails. Either opcode-index, opcode-name or snippets-file must be set. -mode=[latency|uops|inverse_throughput|analysis] Specify the run mode. Note that some modes have additional require- ments and options. latency mode can be make use of either RDTSC or LBR. latency[LBR] is only available on X86 (at least Skylake). To run in latency mode, a positive value must be specified for x86-lbr-sample-period and --repetition-mode=loop. In analysis mode, you also need to specify at least one of the -analysis-clusters-output-file= and -analysis-inconsistencies-out- put-file=. -x86-lbr-sample-period=<nBranches/sample> Specify the LBR sampling period - how many branches before we take a sample. When a positive value is specified for this option and when the mode is latency, we will use LBRs for measuring. On choosing the "right" sampling period, a small value is preferred, but throt- tling could occur if the sampling is too frequent. A prime number should be used to avoid consistently skipping certain blocks. -repetition-mode=[duplicate|loop|min] Specify the repetition mode. duplicate will create a large, straight line basic block with num-repetitions instructions (repeating the snippet num-repetitions/snippet size times). loop will, optionally, duplicate the snippet until the loop body contains at least loop-body-size instructions, and then wrap the result in a loop which will execute num-repetitions instructions (thus, again, re- peating the snippet num-repetitions/snippet size times). The loop mode, especially with loop unrolling tends to better hide the ef- fects of the CPU frontend on architectures that cache decoded in- structions, but consumes a register for counting iterations. If per- forming an analysis over many opcodes, it may be best to instead use the min mode, which will run each other mode, and produce the mini- mal measured result. -num-repetitions=<Number of repetitions> Specify the target number of executed instructions. Note that the actual repetition count of the snippet will be num-repetitions/snip- pet size. Higher values lead to more accurate measurements but lengthen the benchmark. -loop-body-size=<Preferred loop body size> Only effective for -repetition-mode=[loop|min]. Instead of looping over the snippet directly, first duplicate it so that the loop body contains at least this many instructions. This potentially results in loop body being cached in the CPU Op Cache / Loop Cache, which allows to which may have higher throughput than the CPU decoders. -max-configs-per-opcode=<value> Specify the maximum configurations that can be generated for each opcode. By default this is 1, meaning that we assume that a single measurement is enough to characterize an opcode. This might not be true of all instructions: for example, the performance characteris- tics of the LEA instruction on X86 depends on the value of assigned registers and immediates. Setting a value of -max-configs-per-opcode larger than 1 allows llvm-exegesis to explore more configurations to discover if some register or immediate assignments lead to different performance characteristics. -benchmarks-file=</path/to/file> File to read (analysis mode) or write (latency/uops/inverse_through- put modes) benchmark results. "-" uses stdin/stdout. -analysis-clusters-output-file=</path/to/file> If provided, write the analysis clusters as CSV to this file. "-" prints to stdout. By default, this analysis is not run. -analysis-inconsistencies-output-file=</path/to/file> If non-empty, write inconsistencies found during analysis to this file. - prints to stdout. By default, this analysis is not run. -analysis-clustering=[dbscan,naive] Specify the clustering algorithm to use. By default DBSCAN will be used. Naive clustering algorithm is better for doing further work on the -analysis-inconsistencies-output-file= output, it will create one cluster per opcode, and check that the cluster is stable (all points are neighbours). -analysis-numpoints=<dbscan numPoints parameter> Specify the numPoints parameters to be used for DBSCAN clustering (analysis mode, DBSCAN only). -analysis-clustering-epsilon=<dbscan epsilon parameter> Specify the epsilon parameter used for clustering of benchmark points (analysis mode). -analysis-inconsistency-epsilon=<epsilon> Specify the epsilon parameter used for detection of when the cluster is different from the LLVM schedule profile values (analysis mode). -analysis-display-unstable-clusters If there is more than one benchmark for an opcode, said benchmarks may end up not being clustered into the same cluster if the measured performance characteristics are different. by default all such op- codes are filtered out. This flag will instead show only such un- stable opcodes. -ignore-invalid-sched-class=false If set, ignore instructions that do not have a sched class (class idx = 0). -mcpu=<cpu name> If set, measure the cpu characteristics using the counters for this CPU. This is useful when creating new sched models (the host CPU is unknown to LLVM). --dump-object-to-disk=true By default, llvm-exegesis will dump the generated code to a tempo- rary file to enable code inspection. You may disable it to speed up the execution and save disk space. EXIT STATUS llvm-exegesis returns 0 on success. Otherwise, an error message is printed to standard error, and the tool returns a non 0 value. AUTHOR Maintained by the LLVM Team (https://llvm.org/). COPYRIGHT 2003-2026, LLVM Project 13 2026-08-04 LLVM-EXEGESIS(1)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLE 1: BENCHMARKING INSTRUCTIONS | EXAMPLE 2: BENCHMARKING A CUSTOM CODE SNIPPET | EXAMPLE 3: ANALYSIS | OPTIONS | EXIT STATUS | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=llvm-exegesis13&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>