FreeBSD Manual Pages
MAILBOT(1) S. Varshavchik. MAILBOT(1) NAME mailbot - A MIME-aware autoresponder utility SYNOPSIS mailbot [options] {program} [arg...] In .mailfilter: if (/^Subject: *info/) { cc "| mailbot -t /usr/share/autoresponse/info -d autoresponsedb \ -A 'From: info@domain.com' /usr/bin/sendmail -f ''" } DESCRIPTION mailbot reads an E-mail message on standard input and creates an E-mail message replying to the original message's sender. A program is specified as an argument to mailbot after all of mailbot options. program is ex- pected to read the created autoreply on its standard input, and mail it. If program is not specified, mailbot runs 'sendmail -f ""'. mailbot has several options for suppressing duplicate autoresponse mes- sages. If mailbot chooses not to send an autoresponse, it quietly termi- nates without running program. The autoresponse is optionally formatted as a MIME delivery status notification. The text of the autoresponse is specified by the -t or the -m argument. Ei- ther one is required. Everything else is optional. The only exception is the -T replydraft option, which requires the -l option instead of either -t or -m. The default behavior is to send an autoresponse unless the original message has the "Precedence: junk" or the "Precedence: bulk" header, or the "Precedence: list" header, or the "List-ID:" header, or if its MIME content type is "multipart/report" (this is the MIME content type for delivery sta- tus notifications). The -M option formats the the autoresponse itself as a MIME delivery status notification. OPTIONS -A "header: value" Add a header to the autoresponse. Multiple -A options are allowed. In most situations, the -A option must be used to set the "From:" header in the autogenerated response. -faddress Address the autoresponse to address, which must be an RFC 2822[1] ad- dress. By default mailbot takes the autoresponse address from the From: (or the Reply-To:) header in the original message. -f, if present, overrides and explicitly sets the autoresponse address. "address" must immediately follow the -f option without an intervening space (it's a single command line argument). An -f option without an address takes the address from the SENDER environment variable. -t filename Read text autoresponse from filename, which must contain a plain text message in "flowed-text" format. In a "flowed-text"-formatted message, each line that ends with a space character indicates that the line log- ically flows into the next line. This allows the message to be refor- matted for any shown display width. Note Messages in languages (see the -c option) which use spaces as word delimiters must have two spaces at the end of a flowed line. The last space on a flowed line is logically removed, and the first space separates the last word on the previous line from the first word on the next line. Otherwise, the two words will not have a logical space between them if they get repositioned as part of ad- justing the message's width for display. Messages in ideographic languages that do not use spaces as word delimiters need only one space trailing a flowed line. Note The trailing whitespace has no visual impact when shown by software that does not implemented flowed text format, and always displays messages using their original width. -c charset Set the autoresponse's MIME character set to charset. Run mailbot with- out any arguments to see the default character set. -m filename Read a MIME autoresponse from filename. This is similar to the -t op- tion, except that filename contains MIME headers, followed by a blank line, and the corresponding MIME content. The contents of filename are inserted in the autoresponse without further processing. The specified file must contain the "Content-Type" header specifying the "text/plain" MIME type, with the "format=flowed", "delsp=yes", and the "charset" attributes, which override the -c parameter. If the spec- ified file has a "Content-Transfer-Encoding" header it must be either "7bit" or "8bit", it may not be "quoted-printable". mailbot always drops any existing "Content-Transfer-Encoding" header and always adds the "Content-Transfer-Encoding: 8bit" header, even with the -m, since the salutation inserted into the message includes the sender's name, which may contain 8-bit characters. Example: Content-Type: text/plain; format=flowed; delsp=yes; charset="iso-8859-1" Mary had a little lamb, Its fleece was white as snow. And everywhere Mary went, The lamb was sure to go. Note When the -m option is specified mailbot ignores the locale's char- acter set and formats the autoreply according to the character set read from the "Content-Type" header. -M address Format the autoresponse as a delivery status notification (RFC 1894[2]). address is an RFC 2822[1] E-mail address that generates the DSN. Note that the -A option should still be used in addition to -M in order to set the From: header on the autoresponse. -M sets the DSN ad- dress only. The -M option automatically sets -T replydsn -R type Specify the feedback report type, with type set to abuse, fraud, other, or virus. Must be used together with "-T feedback" or "-T replyfeed- back". -T format Set the reply format. format must be one of the following values: * "reply" - the default reply format. * "replyall" - like "reply", except also puts the recipients in the original message's "To:" and "Cc:" headers into the "Cc:" header of the generated reply. * "replydsn" - like "reply", except the message is formatted as a de- livery status notification. * "replydraft" - like "reply", with the text of the autoresponse com- ing from a maildir specified by the -l option. See "Autoreplies from a maildir folder", below. * "forward" - attach the original message as forwarded text. * "forwardatt" - attach the original message as a forwarded message attachment. * "feedback" - generate an Email Feedback Report message (see RFC 5965[3]). The "-R" option is required when this is specified. * "replyfeedback" - like "feedback", but also adds a "To:" header, addressed to the original message's sender. -N Do not quote the contents of the original message in the message cre- ated by "reply", "replyall", "replydsn", "feedback", and "replyfeed- back" options. Note The original message gets quoted, in the absence of this option, only if the original message was formatted as plain text. mailbot is unable to quote an original message which was formatted as HTML, or any other non-plaintext format. Additionally, using the -m option to specify MIME contents other than plain text automatically implies -N. Note For "replydsn", "feedback", and "replyfeedback" options, the con- vention is to attach the original message, or only its headers, separately; so this option should always be specified for these three reply formats. -a Attach the entire message, for "replydsn", "feedback", and "replyfeed- back", instead of only its headers. -e Generate a reply ("reply"-formats) to the address listed in any "Er- rors-To" or "Return-Path" header, if present, instead of the "From" header. -S "salutation" Use the given salutation in the "reply". The default value is "%F writes:". The following substitutions are recognized in the salutation string: * %% - an explicit % character. * %n - a newline character. * %C - the "X-Newsgroup:" header from the original message. * %N - the "Newsgroups:" header from the original message. * %i - the "Message-ID:" header from the original message. * %f - the original message's sender's address. * %F - the original message's sender's name. * %S - the "Subject:" header from the original message * %d - the original message's date, in the local timezone. * %{...}d - use strftime() to format the original message's date. A plain %d is equivalent to %{%a, %d %b %Y %H:%M:%S %z}d. All other characters in the salutation string are left as is. -F "marker" When generating a forward, use the marker to separate the forwarded message from the autoreply text, instead of the default "--- Forwarded message ---" -r addrlist addrlist is a comma-separated list of RFC 2822[1] E-mail addresses. mailbot sends an autoresponse only if the original message has at least one of the specified addresses in any To: or Cc: header. -d filename Create a small database, filename, that keeps track of senders' E-mail addresses, and prevent duplicate autoresponses going to the same ad- dress (suppress autoresponses going back to the same senders, for sub- sequent received messages). The -d option is only available if maildrop has GDBM/DB extensions enabled. -D x Do not send duplicate autoresponses (see the -d option) for at least x days (default: 1 day). The -d option creates a database of E-mail ad- dresses and the times an autoresponse was last mailed to them. Another autoresponse to the same address will not be mailed until at least the amount of time specified by the -D option has elapsed. -s "subject" Set the Subject: header on the autoresponse to subject. -n Show the resulting message, do not send it. Used for debugging pur- poses. --feedback-original-envelope-id "<envelopeid>", --feedback-origi- nal-mail-from "<mailfrom>", --feedback-reporting-mta "dns; hostname", --feedback-source-ip aaa.bbb.ccc.ddd, --feedback-incidents n, --feed- back-authentication-results "results", --feedback-origi- nal-rcpt-to "<rcptto>", --feedback-reported-domain example.com Optional parameters to include in the feedback report generated by "feedback" and "replyfeedback". mailbot always adds "Arrival-Date" with the current time, as well as "Version" and "User-Agent". "--feedback-authentication-results", "--feedback-original-rcpt-to" and "--feedback-reported-domain" may be specified more than once. Where appropriate, UTF-8 encoding should be used for non-ASCII charac- ters. -l maildir Specifies the maildir for the "-T replydraft" option. See "Autoreplies from a maildir folder", below. Autoreplies from a maildir folder In .mailfilter: cc "| mailbot -T replydraft -l './Maildir/.Vacation' \ -d autoresponsedb \ -A 'From: info@domain.com' /usr/bin/sendmail -f ''" to "./Maildir" The -T replydraft reply format takes the content of the autoresponse from the most recent message in a maildir. The -l option specifies the maildir. The above example takes the message from $HOME/Maildir/.Drafts which should be a maildir (with the usual cur, new, and tmp subdirectories). It would typically get created by Courier-IMAP as a folder named "Vacation". This makes it possible to install autoreplies via an IMAP client by creat- ing a folder named "Vacation", and copying a message into it. The contents of the message become the autoresponse. If the named maildir does not exist, or is empty, mailbot does nothing. If the named maildir has more than one message, the most recent message gets used. The above example uses additional mailbot options to suppress duplicate au- toresponses, and to set the "From:" header on the autoresponse. SEE ALSO maildrop(1)[4], reformail(1)[5], reformime(1)[6]. AUTHOR Sam Varshavchik Author NOTES 1. RFC 2822 https://datatracker.ietf.org/doc/html/rfc2822 2. RFC 1894 https://datatracker.ietf.org/doc/html/rfc1894 3. RFC 5965 https://datatracker.ietf.org/doc/html/rfc5965 4. maildrop(1) http://www.courier-mta.org/maildrop/maildrop.html 5. reformail(1) http://www.courier-mta.org/maildrop/reformail.html 6. reformime(1) http://www.courier-mta.org/maildrop/reformime.html Courier Mail Server 01/30/2026 MAILBOT(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | AUTHOR | NOTES
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mailbot&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>