FreeBSD Manual Pages
MARIADB-TEST(1) MariaDB Database System MARIADB-TEST(1) NAME mariadb-test - program to run test cases (mariadb-test is now a symlink to mariadb-test) mariadb-test-embedded - program to run embedded test cases SYNOPSIS mariadb-test [options] [db_name] mariadb-test-embedded [options] [db_name] DESCRIPTION The mariadb-test program runs a test case against a MariaDB server and op- tionally compares the output with a result file. This program reads input written in a special test language. Typically, you invoke mariadb-test via mariadb-test-run.pl rather than invoking it directly. mariadb-test-embedded is similar but is built with support for the libmari- adbd embedded server. Features of mariadb-test: * Can send SQL statements to MariaDB servers for execution * Can execute external shell commands * Can test whether the result from an SQL statement or shell command is as expected * Can connect to one or more standalone mariadbd servers and switch be- tween connections * Can connect to an embedded server (libmariadbd), if MariaDB is compiled with support for libmariadbd. (In this case, the executable is named mariadb-test-embedded rather than mariadb-test.) By default, mariadb-test reads the test case on the standard input. To run mariadb-test this way, you normally invoke it like this: shell> mariadb-test [options] [db_name] < test_file You can also name the test case file with a --test-file=file_name option. The exit value from mariadb-test is 0 for success, 1 for failure, and 62 if it skips the test case (for example, if after checking some preconditions it decides not to run the test). mariadb-test supports the following options: * --help, -? Display a help message and exit. * --basedir=dir_name, -b dir_name The base directory for tests. * --character-sets-dir=path The directory where character sets are installed. * --compress, -C Compress all information sent between the client and the server if both support compression. * --connect-timeout=num This can be used to set the MYSQL_OPT_CONNECT_TIMEOUT parameter of mysql_options to change the number of seconds before an unsuccessful connection attempt times out. * --continue-on-error Continue test even if we got an error. This is mostly useful when test- ing a storage engine to see what from a test file it can execute, or to find all syntax errors in a newly created big test file. * --cursor-protocol Use cursors for prepared statements. * --database=db_name, -D db_name The default database to use. * --debug[=debug_options], -#[debug_options] Write a debugging log if MariaDB is built with debugging support. The default debug_options value is 'd:t:S:i:O,/tmp/mariadb-test.trace'. * --debug-check Print some debugging information when the program exits. * --debug-info Print debugging information and memory and CPU usage statistics when the program exits. * --host=host_name, -h host_name Connect to the MariaDB server on the given host. * --logdir=dir_name The directory to use for log files. * --mark-progress Write the line number and elapsed time to test_file.progress. * --max-connect-retries=num The maximum number of connection attempts when connecting to server. * --max-connections=num The maximum number of simultaneous server connections per client (that is, per test). If not set, the maximum is 128. Minimum allowed limit is 8, maximum is 5120. * --no-defaults Do not read default options from any option files. If used, this must be the first option. * --non-blocking-api Use the non-blocking client API for communication. * --overlay-dir=dir_name Overlay directory. * --password[=password], -p[password] The password to use when connecting to the server. If you use the short option form (-p), you cannot have a space between the option and the password. If you omit the password value following the --password or -p option on the command line, you are prompted for one. * --plugin-dir=dir_name Directory for client-side plugins. * --port=port_num, -P port_num The TCP/IP port number to use for the connection or 0 for default to, in order of preference, my.cnf, $MYSQL_TCP_PORT, /etc/services, built- in default (3306). * --prologue=name Include the contents of the given file before processing the contents of the test file. The included file should have the same format as other mariadb-test test files. This option has the same effect as putting a --source file_name command as the first line of the test file. * --protocol={TCP|SOCKET|PIPE|MEMORY} The connection protocol to use for connecting to the server. It is use- ful when the other connection parameters normally would cause a proto- col to be used other than the one you want. * --ps-protocol Use the prepared-statement protocol for communication. * --quiet Suppress all normal output. This is a synonym for --silent. * --record, -r Record the output that results from running the test file into the file named by the --result-file option, if that option is given. It is an error to use this option without also using --result-file. * --result-file=file_name, -R file_name This option specifies the file for test case expected results. --re- sult-file, together with --record, determines how mariadb-test treats the test actual and expected results for a test case: * If the test produces no results, mariadb-test exits with an error message to that effect, unless --result-file is given and the named file is an empty file. * Otherwise, if --result-file is not given, mariadb-test sends test results to the standard output. * With --result-file but not --record, mariadb-test reads the ex- pected results from the given file and compares them with the ac- tual results. If the results do not match, mariadb-test writes a .reject file in the same directory as the result file, outputs a diff of the two files, and exits with an error. * With both --result-file and --record, mariadb-test updates the given file by writing the actual test results to it. * --result-format-version=# Version of the result file format to use. * --server-arg=value, -A value Pass the argument as an argument to the embedded server. For example, --server-arg=--tmpdir=/tmp or --server-arg=--core. Up to 64 arguments can be given. * --server-file=file_name, -F file_name Read arguments for the embedded server from the given file. The file should contain one argument per line. * --silent, -s Suppress all normal output. * --sleep=num, -T num Cause all sleep commands in the test case file to sleep num seconds. This option does not affect real_sleep commands. An option value of 0 can be used, which effectively disables sleep com- mands in the test case. * --socket=path, -S path The socket file to use when connecting to localhost (which is the de- fault host). * --sp-protocol Execute DML statements within a stored procedure. For every DML state- ment, mariadb-test creates and invokes a stored procedure that executes the statement rather than executing the statement directly. * --ssl Enable SSL for connection (automatically enabled with other flags). Disable with --skip-ssl. * --ssl-ca=name CA file in PEM format (check OpenSSL docs, implies --ssl). * --ssl-capath=name CA directory (check OpenSSL docs, implies --ssl). * --ssl-cert=name X509 cert in PEM format (check OpenSSL docs, implies --ssl). * --ssl-cipher=name SSL cipher to use (check OpenSSL docs, implies --ssl). * --ssl-key=name X509 key in PEM format (check OpenSSL docs, implies --ssl). * --ssl-crl=name Certificate revocation list (check OpenSSL docs, implies --ssl). * --ssl-crlpath=name Certificate revocation list path (check OpenSSL docs, implies --ssl). * --ssl-verify-server-cert Verify server's "Common Name" in its cert against hostname used when connecting. This option is disabled by default. * --suite-dir=dir_name Suite directory. * --tail-lines=nn Specify how many lines of the result to include in the output if the test fails because an SQL statement fails. The default is 0, meaning no lines of result printed. * --test-file=file_name, -x file_name Read test input from this file. The default is to read from the stan- dard input. * --timer-file=file_name, -m file_name If given, the number of microseconds spent running the test will be written to this file. This is used by mariadb-test-run.pl for its re- porting. * --tmpdir=dir_name, -t dir_name The temporary directory where socket files are created. * --user=user_name, -u user_name The MariaDB user name to use when connecting to the server. * --verbose, -v Verbose mode. Print out more information about what the program does. * --version, -V Display version information and exit. * --view-protocol Every SELECT statement is wrapped inside a view. COPYRIGHT Copyright (C) 2007, 2010, Oracle and/or its affiliates, 2010-2025 MariaDB Foundation This documentation is free software; you can redistribute it and/or modify it only under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License. This documentation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with the program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335 USA or see http://www.gnu.org/licenses/. SEE ALSO For more information, please refer to the MariaDB Documentation, available online at https://mariadb.com/docs/ AUTHOR MariaDB Foundation (http://www.mariadb.org/). MariaDB 11.8 5 March 2025 MARIADB-TEST(1)
NAME | SYNOPSIS | DESCRIPTION | COPYRIGHT | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mysqltest&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>